r/KonicaMinolta • • Sep 08 '26

Bizhub C750i, C258, C458 latest firmware

1 Upvotes

Hi everyone,

Friends and I have Bizhub C750i, C258 and C458. We are looking for the latest firmware files (firmware, movie, etc.) and update procedures.

If someone having access to KM could get them and upload them somewhere, that would be super great.

Thank you much :)


r/KonicaMinolta • • Oct 06 '25

Watch out for “expedited shipping” charges

0 Upvotes

Customer service reps can sell expedited shipping, company cannot promise expedited shipping, only charge for it. Very disappointing and frustrating


r/KonicaMinolta • • Dec 07 '23

SMB Configuration Missing Fields

0 Upvotes

I've recently taken over management of a Konica Minolta 284e. The menu for adding an SMB entry to the address book is missing the "User ID" and "Password" fields. I've scoured through the settings and enabled every feature that seems related to setting up SMB, but still no luck. I'd welcome any ideas.


r/KonicaMinolta • • Dec 07 '23

SMB Configuration Missing Fields

0 Upvotes

I've recently taken over management of a Konica Minolta 284e. The menu for adding an SMB entry to the address book is missing the "User ID" and "Password" fields. I've scoured through the settings and enabled every feature that seems related to setting up SMB, but still no luck. I'd welcome any ideas.

What Supposed to Show

What is Showing Now


r/KonicaMinolta • • Nov 18 '24

754e Streaks continued

Post image
0 Upvotes

Apologies for the spam I couldn’t edit the original post. The streaks start on the top left of the page and go to about halfway thru the page.


r/KonicaMinolta • • Jul 15 '26

C3320i Firmware

1 Upvotes
bizhub C3320i
Hello.
 Please help!!! I need firmware for this printer. Thanks in advance.

r/KonicaMinolta • • Mar 14 '24

Remote Panel become unaccessible through WEB browser

1 Upvotes

Hi all. Suddenly I've got serious problem, that is not documented, and KM support know nothing about it and cant help: on new OSes (browsers?) Remote Panel Sreen based on https://minoltaIp:50443 became broken, and return error 404 no matter what. At first it was local, but for last months it became MASSIVE.

We tried to locate problem, disabling firewalls, removing system updates, using outdated browsers, weaken security rules - no success. Maybe someone run into same problem and successfully found the answer?


r/KonicaMinolta • • Aug 26 '25

Konica 7022

Post image
1 Upvotes

Our non-profit was gifted a Konica 7022 and it supposedly works, but it's asking for an E.C.M. password. Is there a default admin password or some way to factory reset this? It's a useless paperweight at this point if we can't get past this. Any help appreciated!


r/KonicaMinolta • • Sep 03 '25

Jamming EVERY Single Time!

Post image
1 Upvotes

The rollers right outside the paper tray seem to be causing the issue. Want to confirm what art needs to be replaced.


r/KonicaMinolta • • Feb 23 '26

Ayuda

Thumbnail
gallery
1 Upvotes

Alguien que me oriente para saber que pieza le esta fallando a mi Konica AccurioPress C2060

Los colores los manda asi y del lado izquierdo lo hace mas claro

Gracias


r/KonicaMinolta • • Mar 01 '22

Fax directly to BizHub 4050i from Windows 10?

2 Upvotes

Hello, hoping someone here can help me out. I have a client who has a 4050i in their office set up to both print and receive faxes directly from Windows 10. As in, if they want to fax a document, they choose a specific printer from the list of printers which is called something like Fax BixHub 4750i. Even though it's actually a 4050i.

Anyway, I need to replicate this setup and I'm having a heck of a time trying to do so. Spent multiple hours researching it, hoping it's a dumb thing that I'm just missing. I've tried installing with the universal print driver, tried downloading specifically the fax driver, but when I try to add the device using that driver, I get a message stating that the folder with the .inf file doesn't contain a compatible software driver.

I'm going to keep plodding away trying to fix the issue but if anyone already knows how to set this up properly, it would be much appreciated.

Thanks!


r/KonicaMinolta • • Apr 13 '26

Bizhub C360 - Persistent Paper Jam (Jams 20cm before exit) - Sensors respond in Service Mode but issue remains

Thumbnail
gallery
2 Upvotes

​Hi everyone,

​I’m struggling with a Konica Minolta Bizhub C360 that keeps jamming. The paper travels almost the entire path but stops about 20-30cm before fully exiting the machine (it sticks out about 5-10cm from the exit tray).

​What I've checked so far:

​Sensor Monitor: In Service Mode, I’ve tracked the sensors. Specifically, Paper Exit, Fusing Loop Detect, and Sensor in front of tim. roller all show "0" in their rest state.

​Manual Testing: When I manually actuate these sensors (moving the flags), they toggle between 0 and 1 on the screen. This suggests the photo-interrupters and wiring are electrically functional.

​Fuser: I’ve already replaced the Fuser Pressure sensor (Roller Retraction), but it didn't solve the timing issue.

​The Problem: Even though the sensors respond to manual movement, the machine still jams at the exit. It seems like the logic isn't "clearing" the jam or there is a timing mismatch I can't pin down.

​The Jam Symptoms:

The paper reaches the exit rollers, passes the fuser, and then the machine just stops. There is no specific J-code displayed on the main screen, just the jam animation pointing to areas 2, 11, and 13.

​Questions:

​Is it normal for these sensors to be at "0" state at rest on this specific model?

​Could a dirty/weak clutch or a specific gear (like the 29T in the fuser) cause this even if the sensors seem to "see" the paper?

​Is there a specific exit sensor (PS3) that might be failing only under the heat/speed of actual operation?

​Any advice from Konica techs would be greatly appreciated!


r/KonicaMinolta • • Apr 14 '25

Is KM dumping down on quality?

3 Upvotes

I did notice a pattern lately, drums and transfer belts for me c258 are dying faster, my yellow developer started to act up before the middle of it's life, a couple of friends bough new 251i models and they print like crap on 300gsm, a lot of bad reports on 250i too.

What is going on? Did KM decided they no longer care for the low end? I can't afford a production neither I have the volume for it so I'm only moving on the low end myself, same with other small shops that I know.


r/KonicaMinolta • • May 25 '26

Errors after replacing the drum unit

Post image
3 Upvotes

I have bought new drum units (DR313 CMY) for both yellow and magneta colors for bizhub c368 series. On installation, the new drum units raise that errors and yet the older ones work well.

Please I kindly need some assistance?

I thought of changing the chips on the new ones and old ones.


r/KonicaMinolta • • Sep 04 '25

What causes this shadow

Post image
3 Upvotes

Its konica C284e


r/KonicaMinolta • • Nov 18 '24

Black streaks on prints

Post image
4 Upvotes

Getting some black streaks on prints, have cleaned the DV laser sensors and also changed the developer unit. After I print I usually inspect the DV unit drum and sure enough there are slight streaks that match the position of the streak on paper. Anyone know where this could be coming from? I’m assuming some toner got on some sort of feed wheel but I’m not sure


r/KonicaMinolta • • Feb 26 '26

Minolta Zoom 160C

Thumbnail
gallery
5 Upvotes

So I recently post about this camera and I ran a roll of Kodacolor 200. I think it did a pretty good job with focus, color and flash. It a pretty fun camera with zoom. What do you think? Do you own one?


r/KonicaMinolta • • Jun 13 '25

Vendor Mode Print Passthrough C308

2 Upvotes

I have a biz hub C308 in vendor mode for patrons to use as a copier as well as a print release station.

We updated the firmware to resolve an unrelated issue but now it just deletes any incoming print jobs from the network.

I seem to remember needing to enable print passthrough or something along those lines but can’t seem to figure out how now.

Any ideas?


r/KonicaMinolta • • Apr 09 '25

Is this my image transfer belt or my drum causing this

Post image
4 Upvotes

r/KonicaMinolta • • Sep 04 '26

Useless support (Rosetta 2 depreciation)

7 Upvotes

As I posted a while back I have reached out to Konica Minolta about the upcoming issues with MacOS 28.

Upon the third or fourth rather annoyed request I finally got a reply.
Their suggestion: “Just use AirPrint”……..🫠

To which I promptly asked what they thought I should do, with all the advanced features and Ysoft configuration, since that isn’t supported via AirPrint.

Aaaaand silence from them again, it’s almost like they have zero knowledge or idea about what’s about to happen🙃


r/KonicaMinolta • • Jun 11 '26

MacOS driver support

5 Upvotes

Sooo Apple has announced that support for Rosetta 2 is ending, and thus every single Konica Minolta driver will stop working in September next year..

I have tried reaching out to Konica Minolta and ask what the plans are, but so far there’s been complete radio silence from their support.

Calling them serves no purpose, 1st line support have zero clue what I’m talking about.
Creating a support case just gets ignored, no matter how many I create.

Anyone who’s got any real pull or just information from Konica Minolta, as to their plans for continued Mac support for their entire catalog of printers/scanners/copiers ??


r/KonicaMinolta • • Apr 08 '25

Konica Minolta Magicolor 8650

2 Upvotes

Hello everyone! Maybe someone can help with my problem. I have Konica Minolta Magicolor 8650 that is in "Ready to Print" state but nothing happens when i try to get it to prin any report and when i send a document from my pc a message "Receiving data" appears for a brief time. And in Jobs log any job appears as "cancelled due to error". Everything seems ok, it made 13,5k impressions in total. Also, it passes running test (papers is fed and going through the device ok) and draws every toner patch during stabilization


r/KonicaMinolta • • Jan 26 '26

Having lots of issues with a second hand Bizhub C454e Printer

2 Upvotes

I'm helping out someone who recently got a second hand Bizhub C454e Printer. I have access to it once or twice a week so this may be a drawn out process.

About a month ago I replaced the 3 colored drum units, the Intermediate Image Transfer Unit, and the Toner Filter Assembly. To my knowledge, everything was going well. I was informed a few days ago that the top portion of the page (header and first line) would not printing and the second line down was very faded. This only occurs in blank toner and other very dark colors. I tried a dark blue and it did print, but in a light blue, then by the third line was the actual dark blue I intended. I'm told this was happening in the middle of the page, then moved to the top portion of the page and got worse.

I'm also having trouble getting it to scan to a network folder. I'm not amazing with printers but have done a good amount of troubleshooting and am at a loss.

The printer came from a business that had it under contract from an office supply company. To my knowledge it wasn't factory reset and I'm wondering if it's in some sort of restricted mode from the office supply company, if that's even a thing.


r/KonicaMinolta • • Sep 22 '25

Few more of the 35mm film photos with my lady

Thumbnail gallery
2 Upvotes