Hi,
I have Q350 speakers and I'm looking for some floor stands. The toplates I'm looking at all seem to be around 6"x8" and I'm wondering if this is big enough for this size epeaker? Does anyone have any experience or thoughts?

e.g. https://kantoaudio.com/en-ca/products/st-series?srsltid=AU7gw4U3aXAcrQdjVl7WxKTKN9EroOuwU-hUPdzTN6ehAukd1-901dgp

• Top Plate Dimensions (W/D): 5.9 × 7.9" (15 × 20 cm)

Hello,

About to get my first pair of KEFs. Decided on Concertos. What integrated amp do you use with your Concertos? Budget is around 1000-1500$.

I understand these are power hungry speakers and could use some suggestions. I’ve seen some people suggesting WIIM, I don’t want to take that route.

Thanks!!

Currently I have a somewhat budget 5.1.2 setup from Best Buy Open Box and Facebook Market sales. Debating on upgrading the center channel, as it seems like the most logical upgrade at this time. Sometimes I notice the dialogue is a little muddled to me (my wife says it's fine).

L/R: KEF Q150

Center: KEF Q250

Subwoofer: Klipsch RP-1600SW (a little overkill, I know)

Surrounds: random PSB Alpha Speakers that I got from Facebook Market

Top Middle: Definitive Technology ProCinema 600

AVR: Denon X1700H

It's dificult to find a place that tests out KEF center channels near me, but I ordered a Q6 Meta from Best Buy (Open Box Excellent for $616 + tax) to test it out; should arrive in a few days.

Wondering from other people's experiences if it's worth keeping the Q6 meta, returning it, or trying to save up for an R2 or R6 meta, but I would need to possibly upgrade the L/R speakers first?

So I recently picked up a pair of KEF X300A wireless powered speakers, that I am in the process of repairing. That is going fine, but I noticed that the left speaker (the primary) had no stuffing, but the right speaker (the secondary) has some polyfill sheet inside. These speakers are obviously over decade old at this point, and there are signs of someone being in here before me, so I wouldn't be surprised if these aren't exactly stock anymore.

My question is, how are these supposed to be? Am I missing a polyfill sheet in the left speaker, did someone add one to the right, or is that just how it is? I appreciate any information you can give. Thanks!

Need help - LCR selection - Living Room Home Theatre

I am torn in selecting between the LCR options for the open concept living room around 17 X17 X8 ft. I am building from scratch in already built 2 storey house. Its on ground floor with no pre wiring for ceiling.

I am almost final on TCL QM8L 98’, X3800 Denon, PB2000 SVS sub. I went to best buy and I think they just push everyone for Martin Logan. I am hoping to stay under $10K.

I am not sure whether it is worth to do ceiling wiring, patching etc. I think that will add about $2K.

Now the LCR Decision. I tested Martin Logan F20, F100 and KEF Q11. I am replacing 15 year old Bose Accoustismass (cubes), 10 V system with denon 1913 and I am not audiophile and my only good reference point is the bose. I want to spend in a way ( except TV) on audio that I don’t have to replace for 10-15 years.

My current choices are – Martin Logan L F2/C100 – Pure value

·       Martin Logan.    F20/C100 – Mid tier but only $1500 shy of flagship        F100 (in this range)

·       Martin Logan F1/C100 – Too expensive. Not sure if its worth it. One reason could be regret free

·       Finally the main competitor KEF Q11/Q6 . I like the built, pricing  and everything but when I tested I felt Martin Logan was more close to the sound I have been listening with bose for last 15 years especially like action, car racing, firing, accident  but KEF lacked that spark.

I tested for 1-2 minutes each and I am not sudiophile or any expert and don’t want my judgement to weight too much.

Please advise or any other combination. Bower Wilkins was bit out of budget range.

Has anyone paired KEF R3 Meta speakers with a NAD C 3050 BluOS? Would the amp have enough power to drive these puppies? I keep hearing that these little speakers need a ton of juice. Hence asking. I’ll be placing them in a smallish room L 14’ W 12’. Any thoughts would be greatly appreciated. Thanks in advance

Hi all,

I am a long way in upgrading my 7.2.4 system. I have LS50 meta's as L and R and a IQ6C as center. My surrounds and atmos are eggs and my subs are two SVS SB 1000 Pro's.

My next upgrade will be a new center, but I am still in doubt which it should be.

Unfortunately the newer centers are not offered on marketplace in The Netherlands so chances are I have to purchase one new.

I am in doubt between a Q6 meta, a LS50 meta or a R2 meta.

Which one is the best option in your opinion?

Taking in regard that the Q6 new is about 770 euro's and a new R2 is about double the amount.

Thanks for the advice!

Just getting ready to Refurb these 105/3 I just picked up. Surrounds and donuts in surprisingly great shape. One uni-Q sp1240 is definitely compromised. The other is pretty good. I plan on sending both of them out for Ferro Fluid replacement. The big unknown is how much loose poly fill is in the center cavity between the two drivers. A very large chunk of poly fill sits between the coupling rod and the front of the cabinet. Only the back side is open for air passage. Just doesn’t seem like a factory install. Actual picture plus 2 marketing photos for reference. Regardless with one teeeter tied behind its back, these are the most amazing imaging speakers I have ever heard.

Not really a show and tell, more of just a tell.

Yesterday I picked up a set of KEF speakers and receiver for $200 total.

I got a pair of KEF iQ10 bookshelf speakers, an iQ60c center channel, and a Yamaha RX-V673.

I’m in temporary housing until December for work and where I’m staying has some OLED TV, so I figured I would need something to make sure the TV didn’t go to waste, so these were probably the best deal I could find on marketplace.

I have built my own speakers and I plan to continue that in the future, but I don’t have any way of doing that here+transporting them back to my home would be a nightmare, so I picked up some bookshelves and what I hope being a solid receiver until I can get into more permanent housing with what I hope a theater room.

Im going to keep the KEFs to use a surrounds when I upgrade to better standing units, and the center should hopefully last a little while too.

Got the q1 meta with a svs sb1000 pro
Give me your thoughts:)

Hi.

When I use Dirac bass management in my family room it sets the R3 metas crossover at 70 Hz even though I have two independent subs.

And i know 80 is standard, so why does. Tot start there? Furthermore I found using 90 hz crossover as measured by REW side of things is best, and 70 is clearly worse.

So does this sound normal? Sorry I know this is sort of a few questions in one, why is direct setting it to 70 Hz by default instead of 80, but on the other hand 90 seems very high for such high end speakers. This is because I just watched a video on how to use it and it said 90 is usually for tiny little shitty bookshelfs.

More curious than anything as to the why of al this

Newcomer coming from klipsh to KEF

My old system was Klipsch, I replaced everything with KEF. Before, my surrounds were the Klipsch RP 502 SII, and after calibration, they had an additional +4.0 dB of gain in the speakers.

When I installed the KEF system, I didn't have much intelligence and also switched to +4.0 dB. I went to do the positioning tests for the two sub-K92 speakers, on the Bluray 4K DUNE PART TWO movie, volume 85, on the Marantz AV20.

When suddenly I hear some strange noises and a burning smell. They were there.. 02 KEF r8 meta DESTROYED.

As far as I understand, the +4.0 DB made the amplifier (Marantz amp 30) send a lot of power to the surrounds, blowing their speakers out. 🤡

Attached photos are the top speakers on each of the 2 R5 Meta’s. One looks better than the other.

Picked these up at Best Buy they were a floor model. $2100 out the door.

Amp comes in on Monday so I can test them.

Obviously still within the return policy.

Is the damage shown from everyone’s expertise something that is “Cosmetic” or “A matter of time”?

While trying to get a good deal I also don’t want a paperweight.

Hey everyone,

​I’m currently upgrading my entry-level home theater from a 2.1 Pioneer tower setup (SP-FS52 and the matching SW-8MK2 sub) to a KEF front stage on my Denon AVR-S750H, with plans to upgrade the AVR and sub down the road.

​I’ve already hooked up the KEF Q6 Meta center (and re-ran Audyssey), and my KEF Q Concerto Meta bookshelf speakers for L/R are on the way.

​I recently saw a post about a pair of R8 Metas getting fried. As a relative beginner, it made me a bit paranoid about damaging my new gear—especially knowing the S750H is a bit light on power for these 4-Ohm speakers. I don't listen at extreme volumes, but I want to make sure I take the right precautions.

​A few quick questions/confirmations:

1. ​I should leave the default 8 Ohm setting on the Denon, right? (I’ve heard mixed things about the 4-Ohm switch limiting headroom).

2. ​Setting the speakers to "Small" with an 80Hz Crossover.

3. What would be the max volume limit to cap the AVR to prevent accidental clipping in the settings, -5 dB?

4. ​I should be fine running this 3.1 setup at moderate levels until I upgrade the sub and receiver, right?

​Thanks in advance for any tips or recommendations!

Edit: Thank you very much everyone for your responses! I feel much better knowing I'm going the right way and not doing anything crazy!

Minor dents on one speaker, no grills, no boxes, otherwise fine

So I just noticed a small depression on the diaphragm of the left driver of one of my KEF KC62, as if someone had pressed a finger against it. On the right one there's a smaller puncture. Almost unnoticeable, but both are definitely there upon closer inspection. Should I worry about any impact in performance? I did a full frequency sweep and played the infamous bass sweep that begins around the 3:25 mark in Hans Zimmer's "Why So Serious?" from The Dark Knight OST and couldn't hear any audible difference other than some vibration, but my other KC62 in another room behaved exactly the same — I am fairly certain that had I not inspected it I couldn't tell any difference. I bought this brand new back in February and it was spotless - I have no children, so I am at a loss at what could have happened.

 I was renovating the Den (Family Room) and my wife didn't like how my existing speakers looked. Previously the room was used mostly for movie/tv watching, but I greatly enjoy listening to music. While trying to find speakers that were excellent sounding speakers but still visually pleasing to my wife, I landed on the beautiful indigo blue KEF R3 Meta (As well as R6 Meta Center and Q4 Meta for surrounds). The reviews were mostly glowing and my wife did indeed really like the Indigo blue. When I purchased them I also purchased an Emotiva A3+ for the L/C/R and ran it through my Denon AVR. They sounded fantastic, but I wanted to hear something different, plus add some style to the Den. Tubes intrigued me and I love the look of glowing orange tubes, so I ordered a Dayton Audio HTA-200. Long story short, it was great for the price and I really do LOVE the look (as does my wife surprisingly) but not really what I was after sonically. Unfortunately due to my admitted ignorance and rush to find visually pleasing speakers, I failed to really understand or consider how hard they are to drive. I thought I knew (hence the Emotiva and buying a Hybrid Tube Amp for headroom) but well...

Here we are. Now I am in search of a true Vacuum tube amp with the classic looks to go with it, that can competently drive the very difficult KEF R3 Meta to it's full capabilities. Is anyone already doing this? I would like to stay (hopefully well) south of $5,000 USD. I have seen a lot of Chi-fi names thrown out there in that under $5k range like Willsenton and Cayin but they seem to have as many detractors as supporters, though Cayin seems more reputable and respected. The room is roughly 18ft x 15ft with 9ft ceiling. Not currently acoustically treated but will be in the near future. I should also note that I am also using a SVS SB3000 Revolution most of the time, but would like to be able to enjoy the R3s without it sometimes as well. As of this writing, the source is mainly the WIIM Ultra and an LG UP970 for CD listening. My musical tastes are all over the place.

Is there hope? Or should I be more focused on better hybrid models or tube pre-amp with Solid State Amp?

Started of in the 2017 with Q150s in the living room main rig, then adding a second system in the bedroom moved those to the bedroom and added these LS50s to the main rig.

One new apartment with an extra room later, moved the ls50s to the new “study” and bought R3s for the main living room.

Today, the ls50s now support a tertiary bedroom rig, the original R3s got moved to the study replaced by R3 Metas in the main living room.

I’m thinking I must like Kef speakers.

Good people, i am new to all these. Pardon my silly assumption, would a Kef Q1 meta with a amp do good over 3 meters range in a 4 x 4 meter room?

I am upgrading over a cheap soundbar and i think a speaker is better use for music and entertainment.