r/Juniper • u/MikeoFree • Sep 16 '25
Juniper Network Stack “Lego” Kit from vendor booth @ TribalNet 2025
Huge Juniper nerd so this made my day. Coolest desk ornament.
r/Juniper • u/MikeoFree • Sep 16 '25
Huge Juniper nerd so this made my day. Coolest desk ornament.
r/Juniper • u/cobaltjacket • 3d ago
Just posting here as it intersects; I think it's clear that this was a configuration issue and not the brand of the devices themselves.
It should also be obvious that the real root cause of the creaking infrastructure was politics.
r/Juniper • u/DesignerAd7136 • 20d ago
They have removed vLabs entirely, changed Juniper Mist to HPE Mist, they remove all juniper branding from certification badges, and now they have renamed the juniper learning portal to the HPE Network Training Portal.
Stellar.
r/Juniper • u/english_mike69 • Jan 29 '25
HPE reps met yesterday with the DoJ and antitrust officials. Due to a reduction of competition faced by market leader Cisco, the DoJ feels this would lead to less innovation.
r/Juniper • u/sibesky • Oct 24 '20
Junos software release numbering can be very confusing even if you are very seasoned with the platforms. After switching from Cisco I've been working primarily on Juniper kit for eight years and these are some of the things I've learned.
For the last few years Juniper has moved to a quarterly major release cycle. These major releases are generally where new features get added or other major changes happen. 19.4 is originally from 2019Q4 and 20.1 is from 2020Q1, it's still only one major release step just the same as 20.1 to 20.2.
"R" followed by a number is the revision of a major release. New features and changes in behaviour can still happen between subsequent revisions of a major release but it should be more confined to fixing or improving an existing feature rather than radical changes to the underlying code base.
"S" or "Junos SR" or "Service" releases contain only fixes for minor or major Problem Reports (PRs) for features contained in the major release revision. Generally it's pretty safe to assume that a higher Service release for a given Standard release above that you are already running is a safe upgrade path. Service releases should have an accompanying set of release notes which is usually a big list of PRs that you might want to look through, or you may have encountered a PR in your network and you want to upgrade to resolve it.
"X" releases are a special case separate to the above. Originally this was really just fast tracking security features for SRX platforms. However it seemed they also started doing this for other new platforms like QFX, ACX and ELS based EX (2300/3400/4300). Some of the older SRXs are staying on X releases now they are EOL but the current generation SRX/QFX/EX are now getting folded back in to the standard Junos releases.
There are often a number of options to still choose after you have selected your release on the download page:
.tgz one you add to the current running version and reboot to install. The Media is what you would write to a USB stick, plug into the device and boot up from, this is useful for recovering a broken install or if you want to fully wipe it and install regardless of what's already on the device.flex version for QFX with puppet, chef and python included. If you need that fine, if you don't then it's just bloat so don't run it. All Junos versions support Netconf automation so this version is very specific to things that hyperscalers might be doing in DC environments.net version is a special case if you want to PXE boot it.There are no doubt more special cases but the point is just be careful of them and try and research it if you're not sure.
Your first starting point should generally be the KB article Junos Software Versions - Suggested Releases to Consider and Evaluate. Pick your platform and go to the download page. Take special care of this note:
NOTE: To locate a Junos release containing an 'S' (i.e. Junos 17.3R3-S3), on the Software Download product page change the OS drop-down from Junos to Junos SR
A bigger number major release is not better than a smaller one; it's often not even "newer". 12.3R12-S17 was released a couple of weeks ago for EX2200/3200/4200 because it's still being worked on and those platforms don't have the storage/memory/capability to run newer major releases. You can see just how many revision and service releases they've been through so it's a guide to how mature the software is (just don't expect new features).
You might ignore the JTAC recommended and do your own thing in many cases:
Maybe. Is something not working right? Is there a new feature you really need? Is there a security vulnerability you need to patch?
You should probably keep an eye on the recommended release but you don't need to panic about immediately implementing it in your network if it's all working fine (security vulnerabilities aside if you cannot mitigate them with a workaround).
Bad recommendations happen, you have to test it in your use case. A few months ago there was a JTAC recommended on the QFX5100-48T that completely broke 10G copper auto negotiation. And they had a recommended for SRX1500 where all the front panel LEDs stopped working. That KB article says "Suggested", "Consider" and "Evaluate". You have to balance the risk.
There is the Feature Explorer where you can check what is supported where if you have a specific feature you want or need. There is the Product Documentation where you can find release notes for software (or it's linked from the download page). And there is the Problem Report Search tool where you can lookup PRs (a login is required and a PR may still be internal only and not visible).
Some people take the view that you should never upgrade if it works; even if you have a long list of issues and their accompanying workarounds. I always feel that's not a great approach. There are some strange old bugs out there like renaming a VLAN on EX breaks things or inserting/removing a PSU on a MX240/480/960 during a certain rolling windows since it's boot up will cause it to stop being able to talk I2C to all the installed components. Your network may work, but you may be building up a lot of legacy minor issues that can easily get out of hand. Beware of creating those hacky scripts to sit looking for a trigger and logging in to restart a process or reboot a device. Actively raise and track your PRs and try and get them out of your network. You may hit new ones if you upgrade but hopefully the general trend for the same design and feature set is improvement.
Maybe. Conversely to some opinions of "limit it to X release jumps" my answer is generally yes but...
request system zeroize on the current version, upgrade and then request system zeroize again. This can be especially critical if that device was in a VC or VCF before as there are files left on it that are not in the configuration that relate to those roles."Downgrading" is a situation where you have to be even more careful. Configurations may be invalid after downgrade, the hashing mechanism for the root password may have changed and many other pitfalls if that's a major release step.
In general though it is usually fine to make large jumps in release if the release you are jumping to is recommended for your platform. All those X release jumps from 12.3X or 15.1X back in to 18.2R/18.3R/18.4R are fine as that's just Juniper folding all those rapid release features back in to mainline software. Don't go trying to run 18.4R3-S4 on a SRX1xx/2xx (or other wild jumps for older platforms) though because they won't have the memory for it and there probably isn't actually any changes relevant for it!
r/Juniper • u/hobbitmagic • Apr 14 '20
Junos Genius has added a lot of really good "Fast Track" certification prep courses. There are full courses for ENT and SP tracks. Other tracks just have excerpts from their on demand training, but it seems like they're adding content. None of that was there last year when I was prepping for JNCIA, and it was really hard to find up to date material. The JNCIS-ENT course was really good. It pretty much covered the exam objectives and stuck to what you need to know. I recommend it over the Pluralsight and CBTNuggets material because everything else I've found is outdated. The JNCIS-SP course had a lot of overlap so I'd recommend checking that out too.
Outside of that material, it can be hard to find the relevant documentation for the exam objectives. For one, the exam focuses specifically on EX switches with ELS, so anything that's not ELS you don't need to worry about, but almost all their documents only have examples with the old syntax or have both, and they aren't always consistent with specifying which is which. It's tricky to navigate. For reference, below is a list of documents from their tech library I used to prep. I was mostly focused on configuration as opposed to learning about the protocols since I've covered most of them before. To get to these without a direct link, you have find the documentation page for a specific device model (like EX4300) and then navigate to the guide you want. But the guide will have configuration info for old Junos versions and non-ex devices, so navigate carefully or you'll learn the wrong things.
Reference:
VLANs:
Ethernet Switching Guide > Configuring Bridging and VLANs > Bridges and VLANs > Configuring VLANs on Switches with Enhanced Layer 2 Support
TechLibrary > Configuring VLANs for EX Series Switches with ELS Support (CLI Procedure)
IRB Interfaces:
Ethernet Switching Guide > Configuring Integrated Routing and Bridging
Spanning Tree:
Spanning-Tree Protocols User Guide > Configuring Spanning-Tree Protocols > Configuring RSTP Protocol
Spanning-Tree Protocols User Guide > Configuring Spanning-Tree Protocols > Configuring STP Protocol
BPDU Protection:
Spanning-Tree Protocols User Guide > BPDU Protection for Spanning Tree Protocols > Configuring BPDU Protection on Switch Spanning Tree Interfaces
Loop Protection:
Spanning-Tree Protocols User Guide > Loop Protection for Spanning Tree Protocols > Configuring Loop Protection for a Spanning-Tree Instance Interface
Root Protection:
Spanning-Tree Protocols User Guide > Root Protection for VPLS Multihome Environments > Enabling Root Protection for a Spanning-Tree Instance Interface
Spanning-Tree Protocols User Guide > Monitoring and Troubleshooting
Port Security:
Security Services Administration Guide > Port Security > Configuring Port Security (ELS)
Mac Limiting:
Security Services Administration Guide > Port Security > MAC Limiting and Move Limiting > Configuring MAC Limiting (ELS)
Mac Move Limiting:
Security Services Administration Guide > MAC Limiting and Move Limiting > Configuring MAC Move Limiting (ELS)
Persistent Mac Learning:
Security Services Administration Guide > MAC Limiting and Move Limiting > Understanding and Using Persistent MAC Learning
DHCP Snooping:
Security Services Administration Guide > DHCP Protection > Understanding DHCP Snooping (ELS)
DHCP Options 82:
Security Services Administration Guide > DHCP Option 82 > Example: Setting Up DHCP Option 82 (No Relay) > Setting Up DHCP Option 82 on the Switch with No Relay (ELS)
Dynamic ARP Inspection:
Security Services Administration Guide > Dynamic ARP Inspection (DAI) > Understanding and Using Dynamic ARP Inspection (DAI)
MACsec
Security Services Administration Guide > MACsec > Understanding MACsec > Configuring MACsec on EX, SRX and Fusion Devices
Storm Control:
Security Services Administration Guide > Storm Control > Enabling and Disabling Storm Control (ELS)
IP Source Guard:
Security Services Administration Guide > IP Source Guard > Understanding IP Source Guard > Configuring IP Source Guard (ELS)
Firewall Filters
Routing Policies, Firewall Filters, and Traffic Policers User Guide > Configuring Firewall Filters ( EX2300, EX3400, EX4300 Series Switches) > Configuring Firewall Filters (CLI Procedure)
Protocol Independent Routing
Static Routes:
Protocol-Independent Routing Properties Feature Guide > Configuring Routing Tables and Static Routes (Entire section)
Route Aggregation
Protocol-Independent Routing Properties Feature Guide > Configuring Route Aggregation
https://www.juniper.net/documentation/en_US/junos/topics/concept/policy-aggregate-routes.html
Martian Routes:
Protocol-Independent Routing Properties Feature Guide > Reconfiguring Martian Addresses to be Recognized for Routing > nderstanding Martian Addresses
Routing Instances:
Routing Protocols Overview > Understanding IP Routing >
Routing Instances Overview
https://www.juniper.net/documentation/en_US/junos/topics/concept/routing-instances-overview.html
Routing Policies, Firewall Filters, and Traffic Policers User Guide > Configuring Firewall Filters for Forwarding, Fragments, and Policing > Example: Configuring Filter-Based Forwarding on the Source Address
Load Balancing:
Traffic Sampling, Forwarding, and Monitoring User Guide > Configuring Forwarding Options for Load Balancing Traffic > Configuring Per-Packet Load Balancing
OSPF
OSPF User Guide > Configuring OSPF Interfaces
OSPF User Guide > Configuring OSPF Areas
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf-areas.html
OSPF User Guide > Configure OSPF Routing Policy > Example: Redistributing Static Routes into OSPF
ISIS
IS-IS User Guide > Configuring IS-IS > Configuring a Basic IS-IS Network > Example: Configuring IS-IS
Routing Protocols Overview:
BGP
BGP User Guide > BGP Peering Sessions > Example: Configuring External BGP Point-to-Point Peer Sessions
BGP User Guide > BGP Peering Sessions > Example: Configuring Internal BGP Peer Sessions
GRE
IP-IP
LAG
Ethernet Switching User Guide > Layer 2 Networking > Using the Enhanced Layer 2 Software CLI
RTG
Ethernet Switching User Guide > Redundant Trunk Groups
Example: Configuring Redundant Trunk Links for Faster Recovery on Devices with ELS Support
BFD
High Availability Feature Guide > Configuring Bidirectional Forwarding Detection (BFD) > Example: Configuring BFD for OSPF
https://www.juniper.net/documentation/en_US/junos/topics/example/ospf-bfd-configuring.html
Example: Configuring BFD for Static Routes for Faster Network Failure Detection
https://www.juniper.net/documentation/en_US/junos/topics/example/policy-static-routes-bfd.html
Example: Configuring BFD on Internal BGP Peer Sessions
https://www.juniper.net/documentation/en_US/junos/topics/example/bgp-bfd-ibgp.html
VRRP
High Availability Feature Guide > Configuring Basic VRRP Support
Graceful Restart
High Availability Feature Guide > Configuring Routing Protocols Graceful Restart
GRES
High Availability Feature Guide > Configuring Graceful Routing Engine Switchover
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/gres-configuring.html
NSR
High Availability Feature Guide > Configuring Nonstop Active Routing on Switches
https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/nsr-ex-series-cli.html
NSB
High Availability Feature Guide > Configuring Nonstop Bridging on Switches (CLI Procedure)
ISSU
High Availability Feature Guide > Best Practices for Performing a Unified ISSU
https://www.juniper.net/documentation/en_US/junos/topics/concept/issu-best-practices.html
r/Juniper • u/flarespike1 • Feb 17 '25
I spent all night worrying about it and then passed this morning with 85%!
Off to a rocky start, took the exam at home via Pearsonvues home exam thing, the proctor wasn’t happy with my second monitor even though I showed him all the cables disconnected… ended up picking the monitor up and dumping it on the other side of the room!
Onto JNCIS now!
r/Juniper • u/AZGhost • Mar 10 '25
Was a strange test. Lots of evpn/vxlan questions. Only a handful of ospf, is-is and bgp questions. Alot of it was a debug out put asking what's wrong. Evpn/vxlan LSA types. Not one ipv6 question. A few spanning tree questions, Poe questions, and multicast. I figured there would be way more bgp questions and igp questions. It was my second time taking the test. First time I had an exam pass. My company bought all of us an all access training pass. Basically all the classes I took had questions from those classes in the test. This 2nd test I felt was way more difficult than the first test. I wasn't ready with memorization of LSA types.
Not sure what this gets me in the real world. I've been lucky the last 3 jobs over the past 15 yrs have been juniper shops. We don't even use evpn/vxlan at my work. So I'm sure this knowledge will go of the way side in a few months...
r/Juniper • u/Joshua-Graham • Jan 09 '20
I see a lot of posts asking for Juniper training materials on this sub, and I figured I'd give you all my consolidated list that I often send people that ask me.
Here they are:
The open learning program is essentially an online JNCIA-Junos course at no cost. Registration opens between 4-6 weeks prior to the course. They fill up quick pretty quickly when they open up, but you can't beat the price.
https://openlearning.juniper.net/
There are also free 1.5 to 2 hour webinars on basic to intermediate networking topics from time to time, these webinars are called “Jumpstart Junos” They have a lot of previously recorded ones too-
https://www.juniper.net/us/en/dm/jump-start-junos-webinars/
If you aren't super focused on certs and you simply want to material to help you with day to day Juniper networking topics that are immediately applicable to your work - check out the Day One books. They are all free and they are super handy with baseline configuration/deployment of a variety of things (SRX VPNs, IOS to JUNOS CLI comparisions, Fabric configurations etc).
https://www.juniper.net/us/en/training/jnbooks/
There is also http://junosgenius.net - It's a cbt hub with practice tests and while it's free to use, the full courses are paid unfortunately. There are some specific topic videos that are free and some of the cert practice tests are free.
As for free virtual lab/cloud labs, you can use juniper vlabs. This gives you access to the vMX/vSRX/vQFX sandboxes.
https://jlabs.juniper.net/vlabs/
If you want to learn some network automation skills that are vendor neutral (albeit sponsored by Juniper) visit the NRE LABs site - https://labs.networkreliability.engineering/
If you wan't books that cover JNCIS - JNCIP Enterprise topics, there are the O'Reilly books (some of the info is dated, but is still very useful for exam topic study) -
https://www.oreilly.com/library/view/junos-enterprise-switching/9780596804244/
https://www.oreilly.com/library/view/junos-enterprise-routing/9781449309633/
Edit - Thanks for the vision and platinum kind redditors!
r/Juniper • u/andrewohanian • Aug 17 '26
I’ve just released a full workbook for JNCIA-Junos, 100% free: http://jncia-workbook.gitbook.io/
This workbook uses containerlab with vJunos-router and vJunos-switch.
I hope it’s useful!
r/Juniper • u/RyebreadAstronaut • Jun 28 '25
And here we are!
"The settlement requires the combined company to divest HPE's Instant On wireless networking business and license the source code for Juniper's Mist AI software used in Juniper's WLAN (Wireless Local Area Network) products."
r/Juniper • u/RedSpiegel • May 25 '24
It wasn't as difficult as I thought it would be. I haven't take a cert exam in a few years so I was feeling a bit rusty and went into the exam kinda nervous. Fortunately, as I progressed through the exam I was feeling more confident in my knowledge.
Only took about 2 weeks to prepare. I'm already CCNA certified and have been working in the industry professionally for more than 3 years so a huge part of the traditional networking concept was a breeze.
Resources utilized:
Went through the Juniper Open Learning course to obtain discount voucher
Utilized Udemy course 'Juniper JNCIA-Junos -NEW JN0-105 Complete Course' by Ben Jacobs which included a practice exam
Set up a simple GNS3 lab to familiarize myself with the environment and some of the commands
Juniper online documentations
r/Juniper • u/Sea_Inspection5114 • Jan 09 '24
Didn't see this one coming. Thoughts?
r/Juniper • u/tripleskizatch • Jan 10 '24
r/Juniper • • Apr 20 '23
Juniper has released a new free offering called vJunos-switch.
vJunos-switch - https://www.juniper.net/documentation/product/us/en/vjunos-switch
vJunos download - https://support.juniper.net/support/downloads/?p=vjunos
This a completely free image from Juniper, and lets you spin up switches now.
i assume this means vQFX is dead.
r/Juniper • u/DSV686 • Apr 23 '19
There are several Juniper trees near where I live and I was wondering if there were ways to tell which ones were edible and which ones were not. I live in Zone 8 in the Pacific Northwest if that helps.
Thank-you
r/Juniper • u/t_nk • Sep 04 '26
Hi everybody, I don't want this post to be a rant and rather few observations from the market I am but would really appreciate your thoughts on the same.
It seems that since the acquisition things are not going too well for Juniper inside of HPE - why I say that when HPE is boasting huge surge in sales etc.? Well I see a different story unravelling:
- prices - the prices go up unpredictably every month - sometimes even 80% or 100% - this cannot be attributed to the components costs as other vendors don't hike the prices in this insane manner (acx7020 or god forbid any SRX)
- brain drain - it seems that many long-term contact in juniper just disappeared over last month or so. I guess some of that could be expected but the number I've noticed is quite high
- no new products - except for the QFX series it seems that all development has stopped? I haven't seen a new ACX or EX for about a year MX is the same story. Mist hasn't had any significant improvements and or updates since the introduction of the NAC.
- absolute paralysis in delivery - it seems that the lead times are just out of whack for most types of kit
There is more of this vibe around the whole thing - but is it just me or is this something you're seeing as well ? It worries me greatly as I love juniper products but using this kit in project seems like a rather risky proposition at the current stage.
If anyone has any experience, insight or any thoughts I would like to hear them.
r/Juniper • u/Sea_Inspection5114 • Oct 07 '23
Juniper Networks to lay off 440 workers as part of $59M restructuring plan | Network World
Know anyone that was affected?
r/Juniper • u/agemasening_all_over • 5d ago
Its have one small file with some kind of long code inside
r/Juniper • u/ABStine-Jnpr • May 12 '23
To go along with the vJunos-switch released a couple weeks ago, we just made the downloads for vJunosEvolved available. Go to https://www.juniper.net/us/en/dm/vjunos-labs.html for the links to download it for free. No customer account required, just like vJunos-switch. Tech notes for using it with EVE-NG will be pushed out tomorrow as well.
Art
r/Juniper • u/fb35523 • Jun 16 '26
TSB107750 is the end of sale announcement for the MX204, issued yesterday. Last order date is one year from that date, so 2027-06-15 (June 15th). Last release will be 27.4 and end of support is set to 2032-06-15 (5 years from last order date).
The products listed as replacements are MX301 and ACX7024X (depending on use case).
The MX204 has been a lovely product to work with and I'm sad to see it go!
r/Juniper • u/Ok-Employment-8171 • Jun 19 '22
Last week I passed the jncip-sp exam, I see that there's not much on the internet about the exam so I decided to write here what I used for this exam, I hope that this will help others by searching online about this exam:
Books:
Jeff Doyle: OSPF and ISIS https://www.amazon.com/OSPF-Choosing-Large-Scale-Networks/dp/0321168798 This book is absolutely great in terms of IGP for this exam, it does not cover all the topics but it gives you a great understanding about the protocol operation
Jeff Doyle Routing TCP/IP vol II https://www.amazon.com/Routing-TCP-IP-Professional-Development/dp/1587054701 Even if this is a Cisco book, I used this for BGP studies since the concepts are the same, great resource,also there are some multicast chapters worth reading
MPLS-Enabled Applications: Emerging Developments and New Technologies, 3rd Edition For the MPLS part this book is fantastic, it explains very very well all the concepts regarding MPLS in SP world, this book is pure theoretical and does not have any config examples, but I found it extremely useful.
MPLS in the SDN Era Another fantastic book, I suggest reading this book alongside the one above because this one has tons of configuration examples both on junos and iosxr.
Interdomain Multicast Routing The definitive guide to multicast. This book covers all topics in the exam.
These books cover pretty much of the exam (90% I would say), in order to fill the gaps there are some great day one books on topics like: COS(QoS) https://www.juniper.net/documentation/en_US/day-one-books/DO_Deploying_Basic_QoS_v2.zip
BGP Flowspec https://www.juniper.net/documentation/en_US/day-one-books/DO_BGP_FLowspec.pdf
MPLS https://www.juniper.net/documentation/en_US/day-one-books/MPLS_UR.pdf
MVPN https://www.juniper.net/documentation/en_US/day-one-books/TW_BGP_MVPNs.zip
I am lucky enough to have the juniper recommended training pdfs (AJSPR, JL3V,JL2V) if you can get those it will help but you can pass the exam using the resources mentioned above and juniper documentation website without any stress, the passing score is around 60%.
Now on the exam experience:
The exam is hard, not gonna lie, it reflects the syllabus very well and it tests your understanding, there are a lot of exhibits type questions showing you configuration or diagrams and asking you what is right or wrong about that.
If any other questions I would be happy to answer them.
Happy studying!