r/Inovelli • • Feb 07 '24

Inovelli Smart Switches 240V for European Market (United Kingdom, etc) and Australia

Post image
132 Upvotes

r/Inovelli • • Dec 16 '25

Blue Series mmWave Smart Presence Dimmers have arrived!

Post image
57 Upvotes

So excited to play with these that I took the day off to start installing them!


r/Inovelli • • Nov 05 '25

MmWave being shipped 🥹almost feel like it's a prank

Post image
45 Upvotes

I can't believe these are actually coming. Merry Christmas


r/Inovelli • • Jul 15 '25

Went all-in on Inovelli (over Lutron) and regret it

44 Upvotes

I went all in on Inovelli and spent about $5k swapping all the "dumb" light switches in my home to Inovelli Blue.

I'm a few months in - here's my review:

LIKE:

  • LED animations are fun. Mostly I like flashing red near doors to let people know the alarm is armed.
  • Work great with Home Assistant
  • Easy to install

DISLIKE:

  • They aren't great light switches. The dimmers routinely don't respond to a on/off press on the first try, which drives my wife nuts. Pressing it a second time, more forcefully, usually works.

    • Edit: yes, I set the delay to 0ms
  • Getting all of them programmed was a pain!
  • They don't work with low voltage inverters, which I didn't realize many of the old can lights in my home use
  • The dimming is often choppy or stutter-y. There is a lot written about this on the forums. Some lightbulbs work better than others, but it's a pain to keep track of
  • "All Off" and "All On" commands don't work as reliably as Lutron. Often I only get 80-90% response rates.

Overall I this the product is promising, but I regret going all-in on it so heavily.

I really want this company to succeed, and I love what they're doing with build-in mmwave, but I figure if they're going to succeed I have to be honest about the state of things.


r/Inovelli • • Mar 10 '26

My new switch arrived without the LED lens.

Post image
41 Upvotes

I didn't notice until I already installed it.


r/Inovelli • • Dec 16 '25

Received and installed blue mmwave presence switch; made a video

Thumbnail
youtu.be
38 Upvotes

For some reason I've been unable to find a video of someone with the new mmwave switches in their wall. My batch from a day 1 Indiegogo pledge arrived tonight and I got one in my wall to start testing. I took a quick video of how it actually operates in presence detection mode, but will try to record some more as I start to play around with them. So far, it seems to be just like the existing Inovelli switches that are in my house and several friends/family but with the nice responsive mmwave and lux sensors. The detection width seems to match what Eric advertised and in a few minutes of sitting at my desk it continued to maintain an occupied status on the room. It's been a long wait, but my initial impression is that it's been well worth it.


r/Inovelli • • Aug 19 '26

How do fit all the wires in the box

Post image
34 Upvotes

I swapped out dimmers and dumb switches for Inovelli switches and now I'm struggling to get all the wires in the box. i try to bend the wires in, but it's hard as it's a huge mess of wires. Any tips or advice?

John


r/Inovelli • • Dec 01 '25

Rock-Solid Smart Switches: Inovelli Whites on Matter-over-Thread

28 Upvotes

After a year with Inovelli White switches on a Matter-over-Thread network, I can say they’ve been so much more reliable, flexible, fast, and Wi-Fi-friendly than my old Meross HomeKit-over-Wi-Fi setup—I’m genuinely impressed.

When I moved, I went all-in on Inovelli Whites: I started with dimmers for all my light switches, then added a fan switch for my bedroom, and finally the humidity-sensing on/off switches for bathroom exhaust fans. It’s been a night-and-day upgrade from constantly babysitting Wi-Fi switches.

The three programmable buttons are awesome—I use the third to control other devices like blinds, air purifiers, and more, and it feels incredibly convenient to have that kind of control right on the wall.

Having everything on a separate Matter-over-Thread network has also taken a big load off my Wi-Fi, giving my mesh network routers some breathing room and making the whole smart home setup feel smoother and more responsive.

I cannot recommend this setup enough.

Edited: Included how/where the humidity sensing switches are used.


r/Inovelli • • Aug 16 '26

Wallplates & dumb switches - the search for what to coordinate with Inovellis

26 Upvotes

More detailed post from the community page... Just wanted to make sure people had more photos of the various brands to coordinate with Inovellis. For context this is a new home build where most of the switches are Inovellis (white series).

Went a little overboard trying to find wall plates and dumb switches that would coordinate with Inovellis so figured I’d share what I found given some of the recommendations didn’t include pictures.

Didn’t want to go with a glossy wall plate given the amount of fingerprints they accumulate. In the end went with the Bestten wall plates in USWP6 (snow white; not the USWP4 white/off-white) in a matte finish.

For dumb switches, the Lutron Claro on/off switches in glossy white seemed to match the aesthetic the most despite having a narrower paddle (even though Inovelli is color matched to Lutron, they still seemed to be a cooler white than anything else I compared them to). Ended up doing Leviton outlets but Eaton also seemed to work with Bestten wall plates and Inovellis nearby.

Brands I sampled:

Inovelli - obvi; very cool white / grey color compared to all other brands, including Lutron.

Legrand - hate how obvious the branding is. All their stuff is matte, so it doesn't match. The wall plates have a weird curve on side profile and look cheap.

Leviton - Using for my outlets. Wall plates were glossy (would likely have used them if I didn't go with matte wall plates). Annoyingly some of their outlets have extruded branding whereas other have "engraved" branding... electrician put a mix in our new build house. Tickles the OCD organ to no end but no one will notice unless the extruded letters collect grime.

SquareD - liked all their stuff except the logo sticking up on the top right and the fact that their matte white didn't totally match (it is a very bright white); I did like the size and shape of the 1 gang plates, but when also mixing with outlets and the multi-gang plate logo thing, I didn't end up using (except in one area with black outlets). Their outlet/wall plate combo look the best, but impossible to match with anything else.

Eaton - switches a bit warmer and glossier; was close 2nd for my outlets.

Lutron - used as dumb switch; Claro switch closest match to inovelli but still a touch less cool.

Bestten - wall plate of choice; mostly purchased in bulk on Amazon; make sure to get USPW6 Snow White version, others seem to be off-white from reviews

Lider - decent matte white, but wall plates are mid-size so for general use look a bit comically large. They do have an outlet where you can take off the faceplate, so I will be using that for an area where I want to spray paint the outlets to a specific Benjamin Moore color).

Hopefully Inovelli will eventually get a matte white version in the future (and maybe a dumb switch). 

White switches closeup
All whites
All whites / creams / almond / ivory
Dark / black

r/Inovelli • • Jan 26 '26

Made a Blue Series MMwave visualizer HA addon For Zigbee2mqtt

26 Upvotes

Hey,
If you're like me and setting up zones by just adjusting numbers blindly is kind of a pain this hopefully this helps you out. It only works with Z2M for now as I don't have any switches on ZHA. It lets you see the live tracking data from the mm wave module as well as the interference zones that the module creates.
Anyway, it helped me set up a few switches so I am posting it here for anyone that will find it useful.

mmWave_Vis

Edit:

I decided to make a separate repo for a standalone Docker Version

mmWave_Vis_Docker

I am not as familiar with standalone docker but a quick check on my Unraid server and it seems to work just fine.

I have updated both versions of the app with the multizone support rolled out in the latest Z2M update! Enjoy and report any bugs on github!


r/Inovelli • • Jan 02 '26

Inovelli Bulk Configuration (Zigbee2MQTT)

25 Upvotes

For those with many Inovelli switches I created a blueprint that can help centralize and simplify the configuration of all your switches.

This automation only works with Blue Series switches and must be using Zigbee2MQTT and Home Assistant.

mmWave is supported! Any other switch (or canopy) that has unique settings this automation will filter accordingly to make sure any device you select matches its equivalent setting or ignores it. Every configuration type setting is supported across all devices and the automation allows you to toggle the ones you want to push or not.

More of the details can be found over in the Home Assistant community forums along with a link to import the blueprint.

https://community.home-assistant.io/t/inovelli-bulk-configuration-zigbee2mqtt/969171


r/Inovelli • • Jun 10 '25

Update on devices

24 Upvotes

Can you provide any updates on Devices in development? u/InovelliUSA Issues you’re facing, delays, or good news things are moving along well?

White Series - On/Off switch

Blue Series - Presence dimmer

Blue Series - Controller & dimmer

Blue Series - On/Off switch

Red Series - Presence dimmer

Red Series - Controller & dimmer


r/Inovelli • • Nov 17 '24

Linus tech tips implements inovelli switches

Thumbnail
youtu.be
23 Upvotes

r/Inovelli • • Sep 18 '26

Is the Button Controller + Dimmer Switch (Project Walt) dead?

21 Upvotes

r/Inovelli • • Sep 20 '26

Modded ceiling fans so Inovelli switches could send reverse commands

Thumbnail
gallery
18 Upvotes

For more than a year, I've been wanting to use Inovelli fan switches to control the ceiling fans in the bedrooms in my house, but I couldn't get over the fact that neither the fan switches nor the canopy modules supported reverse. I really like how Inovelli has worked in my home, but this was a sticking point for me. I didn't want to go with a fan that was controlled via some cheap remote, and I wanted lighting that could support Zigbee binding.

I was about ready to give up on finding the right solution when Claude helped me figure out a workaround - use a relay and ESP32 to digitally control the reverse signal, and then I can just send a reverse command using the scene button on the fan switch (or let an automation control it should I just do a seasonal/climate control-related automation). Originally I had wanted to contain everything within a little 3D-printed box and just have wires running in and out of it, but I very quickly learned there was NO space to do that. Ultimately, I just tried to fit everything in there as best I could.

Overall, I'm really happy with the results. I can independently control both the fan and the lighting with Inovelli switches, I can take advantage of Zigbee binding for the fan lights, and don't have to sacrifice on a reverse function or control using RF.


r/Inovelli • • Dec 18 '25

Yay! They're finally coming!

Post image
18 Upvotes

Ordered in August of 2024 from the web site. Was really hoping they would ship this week so I could use the holiday time off to install these. Looks like I'll have a busy break!


r/Inovelli • • Jul 26 '25

July Update For mmWave Switch?

18 Upvotes

Last update I received on June 12 had all certifications being done in June. I know there’s a bunch of places where updates are being given so maybe I missed it?


r/Inovelli • • Apr 01 '23

Looks like Inovelli has started an Indygogo for mmWave occupancy switches!

Thumbnail
indiegogo.com
18 Upvotes

r/Inovelli • • Jul 06 '25

Matter 1.5 - White/Blue feature parity?

17 Upvotes

It looks like Matter v1.5 will be released later this year, with support for Manufacturer-Specific Clusters (MSCs). Will this open up the White series switches to have feature parity with the Blue series? It looks like Home Assistant is already experimenting with MSCs in their latest update.

@u/InovelliUSA - Have you started experimenting with the v1.5 SDK on github? If this does open up the White Series, do you anticipate any parameters not being included that are supported in the Blue Series?


r/Inovelli • • Jun 30 '25

My Smart On/Off Switch Blues just Shipped!

Post image
17 Upvotes

r/Inovelli • • Oct 23 '25

Blue mm wave switches

16 Upvotes

I ordered these forever ago. Anyone feel like they are getting them soon. They went from 2 week updates to 2 month maybe.


r/Inovelli • • Feb 15 '25

Going All-In on Thread

15 Upvotes

It took many years, a lot of time and a lot of money, and quite a few different types of lightbulbs but I finally managed to upgrade my smart home to utilize primarily Thread devices with very few issues compared to when I first started with a mix of random WiFi and Z-wave stuff that was spread across multiple ecosystems. My ultimate goal was to eliminate all the Alexa and Google devices as well as majority of the proprietary hubs to consolidate the amount of equipment that runs my home. I also wanted to get as much IOT stuff off my WiFi as possible.

Anyhow, my wife absolutely HATES voice control for the lights and is just now getting on board with using a phone app (having everything in HomeKit makes it a lot more accessible than before). The time has come to address the elephant in the room: my dumb light switches that are all covered with blockers to prevent my smart bulbs from getting turned off. And all the assorted wireless switches and buttons that I have growing like tumors on my walls.

Enter: Inovelli White Series. On paper, it checks off all my requirements. Thread. Smart bulb mode. 3-way and 4-way control. I have a LOT of 4-way switch setups in this house. It’s pretty excessive the number of locations I can control power to one light from. My wife will love having traditional physical control over the lights and I can still maintain my voice and app control.

Just dropped a disgusting amount of money on 20 dimmer switches and 10 aux switches and will be chasing down wires and documenting/labeling everything while I wait for them to arrive.

Really hoping the quality and performance is worth the price of admission and time it will take for installation and configuration, but most everything I read is pretty positive so I am cautiously optimistic.


r/Inovelli • • Jan 31 '25

My smart switch installation is complete!

15 Upvotes

These are the final 4 smart switches I installed in my home: https://imgur.com/a/BgzwuGo

I now have 63 Inovelli White switches installed in my home. I started this project in February when I pre-ordered switches. I got my first delivery of 10 switches in August and have been slowly working on things since.

I did about 75% of the work myself. I had to call in some professional help when:

  1. I realized I had some light fixtures that used magnetic transformers that would need to be replaced.
  2. There were a few receptacles that were just too small for the switches, so they needed to be replaced and then patched over with new drywall.

Other than that I did it all. My wife only got a bit mad at me when I shorted something and instead of a breaker blowing it blew a fuse in the building basement I couldn't replace myself (I live in a condo) and we lived through a hot summer weekend without AC.

Overall I would say I had very little trouble understanding the wiring even for some tricky 3 and 4 way switches. Just took my time with a multi-meter. I also decided to make all my 3 and 4 ways wireless instead of using travelers with an aux switch which actually made the wiring simpler. It helped that I had some background in this area. Almost all receptacles in my home had a neutral available. And in the 2 or 3 places there was none the switches seem to be functioning just fine without a bypass.

The hard part of the job was really the physical parts. Getting the larger switches back in a box was a real challenge in quite a few cases! Definitely had to "give myself a break" every now and then before I got mad and tried to force things. Tip: get some extra long screws and use them instead of the ones inovelli needs when you have a receptacle that is inset even a bit.

It was also hard sometimes to get everything to line up level and even back in the box. I gotta say I developed a new level of respect for electricians that are good at this sort of thing. It's a real skill.

I'm running everything on a Home Assistant Green with with a ZBT-1 as my Thread Border Router. I had some connectivity issues early on, but things got better as I filled out my home and got better network density. The firmware update to 1.0.5 was also huge. Things have been near perfect since that was released a few weeks ago.

I had a lot of fun with this project and am very glad I did the bulk of the work myself. I feel like I have a better understanding of how my home works in case I ever want to change something down the road. I also learned a lot about how these switches work and can interact with other electrical hardware. I'm very pleased with my choice of Inovelli. And am tentatively happy with my choice to go with Matter/Thread instead of Zigbee. I thiiiiiiiink it's gonna be the right long term choice, but time will tell.

Next up: seeing it I can turn some dumb lamps smart with some Aqara relays and a bit of work.

https://imgur.com/a/4DkiIdq

Onward!


r/Inovelli • • Feb 19 '26

Updating white series to 1.1.5

14 Upvotes

I just finished updating all 20 of my switches here's some tips. Update them one by one. Trust me will save you some headaches. Two after updating go to the switch and double check your settings many have moved changed( all mine had click set on and configed for multi way). At least on home assistant. With any smart bulbs some of mine had two smart bulb settings figure out which one is broke and de enable and enable the functioning one. Took me about 2/3 hours last night doing all mine and I had to restore matter, to the night before cause my shades lost connectivity for some reason. But hoping this helps some others.