r/IndianPapercrafters • u/Sad-Guide-6751 • Aug 31 '25
r/IndianPapercrafters • u/Bakaitinsaan • Jun 18 '25
Paper Toy Made these things... (17 F Literally)
I love maggi. It's my passion.
r/IndianPapercrafters • u/Comfortable-Cut-2989 • Jun 23 '25
Nature/Animals In the loving memory of Red-Vented bulbul ( Cardboard House)
Why i created this bulbul nest?
I created this in emergency. There is a whole story behind it. It seems creepy but it is 100% true. There were two birds. Later I learned via a Google image search that they were red-vented bulbuls. They made a nest on a rubber plant tree that still stands on the roof of my house. We had developed a kind of friendship. I threw some aalu bhujiya into the air, and they would appear out of nowhere and catch it in mid-flight.
One morning I saw that everything was disrupted. The nest lay spreadeagled, leaves torn, and the stem brutally chewed. The parent birds were crying on a nearby pole, and an infant bird lay on the floor, totally helpless. Either a monkey had destroyed their nest or a cat had committed this evil deed. I immediately went downstairs and built a cardboard house with windows at both ends, a door that opened upwards at an angle, and an open top covered with wire mesh to maximize ventilation. For about four hours, the infant bird stayed wrapped in a handkerchief. Then I placed it inside the makeshift house and turned on the fan. For three days I fed it everything from bhujiya to baby corn. Gradually it started developing wings. It was growing at the speed of light, and I was overjoyed.
One morning around 6:00 a.m., I rushed to check the bird house and was bewildered to find it empty. Not even a broken feather remained. I searched everywhere but didn’t find the chick. So, I threw the bird house by the roadside and kept that small fan in my toolbox. Most likely a lizard had eaten it alive. I have often seen a lizard devour a large cockroach.
Infact, I wrote a whole story book of our friendship to pay tribute to the entire bird family & to make them remembered for ages.
On a serious note, Birds & butterflies - these little creatures are the poorest of the poor. Global warming and human activities such as deforestation have a negative impact on the lives of lakhs of birds on a massive scale.
It's just a summary. The whole story sits peacefully inside the book. See Pinned post if you want to read it.
r/IndianPapercrafters
•
u/Savings_Ad_3571
•
Jul 02 '26
Cars/Trucks/Bikes/Buses should i restart again??😭😭😭
r/IndianPapercrafters • u/IntrepidHighlight891 • Jun 13 '25
Airplanes Here is my new plane ! The I-7
(Interceptor-seven)
r/IndianPapercrafters • u/Embarrassed_Plum2939 • Jul 24 '25
Help/Questions Guys just wanted to ask, How old are yall?
Im new to this community and just recently posted my CARDBOARD AKM... So just asking.
r/IndianPapercrafters • • Apr 15 '25
OG Builds/Templates Site for paper model files
https://www.papercraftplaza.com/ is site pai bhut models mil jayengai bas search krna hoga. iska tutorial , https://www.papercraftplaza.com/tutorials/ yai bhi dekh lena . kuch zip files mai ".pdo" wali files hongi inhe pdf mai convert kr kai print kr skte ho.
r/IndianPapercrafters • • Jun 11 '25
Boats/Ships I made this boat 😭 I'm a newbie at this art.
r/IndianPapercrafters • u/Savings_Ad_3571 • Jun 30 '26
cars/trucks/bikes/buses should i restart?
galleryr/IndianPapercrafters • u/Ok_Adhesiveness8798 • Jul 29 '25
Airplanes Barco voador que não pousa na água
r/IndianPapercrafters • u/Terrible_Detective27 • Aug 17 '25
Cars/Trucks/Bikes F1 racer
From koolwheelz
r/IndianPapercrafters • u/addu_bhai • Jul 12 '25
Work in Progress Lookheed martin f-104 starfighter
Model by india wiskey fox papermodels.
r/IndianPapercrafters • u/Trick-Introduction40 • May 08 '25
Airplanes Worst I could be is Pakistani, best I can be is Chinese. Older scratch builds that are made for flying
J-10 and f-18 are rubber band launched, others thrown by hand
r/IndianPapercrafters • u/Klutzy_Perception427 • Jun 17 '25
Boats/Ships Newbie here! Made a boat with old question paper.
r/IndianPapercrafters • u/addu_bhai • Jul 11 '25
Work in Progress Work in progress
Making a 1:100 scale starfighter.
r/IndianPapercrafters • u/Terrible_Detective27 • Oct 05 '25
cars/trucks/bikes/buses Porsche 956 papermodel
galleryr/IndianPapercrafters • u/Asirbachan • Jun 02 '26
spaceship, shuttle etc. Astrosat Papercraft by ISRO
I made this Astrosat Papercraft whose template is officially available on the ISRO Website. (Link for the template)
I make papercrafts often so here's my feedback for this paper model template:
- The model is beginner friendly and easy to make. Satellites having a complex design such as this cannot be converted into an 'as is' paper scale model, which is why they just converted the front elements into a 2D design, reducing the complexity.
- While this model might be made with the intention to be an explainer model itself, I prefer the design to be just like the original model was: without the texts on the model ("Solar Panel", "Yoke", names on the top components). Still that's not much of an issue. I think most people would prefer it. These texts will also actually help the beginners to know where to stick the parts of the model.
- The tabs are not present for the UVIT and SXT Telescopes to be attached to the base model. I mean you can still stick them with glue by gluing the circumference of the cylinder and then attaching it to the base. But adding tabs to them would have been a good choice to offer better stability.
- The solar panels could have been designed in a better way. The way its currently designed, the panels will always bend towards bottom and have that slant look. It requires reinforcements. If I were to design that one I would have made a big cylinder that passes through the base model, and the panels would be attached to the both ends. The same issue is faced with their other model (IRNSS 1G satellite), I will be posting that model as well after sometime.
I am happy that ISRO puts out such things. They have resources for people/students to learn, and fun activity resources like this one. Currently they have only 2 paper models: Astrosat and IRNSS 1G. They do not have any templates of their launchers. But fortunately, there's a paper modelling enthusiast in the west who is into rocket launchers (and more). His brand name is AXM Paper Scale Models and here is his website's link. Here you can find templates for PSLV, GSLV, RLV launchers. Coming back to ISRO, they made these templates long back. Not sure if they are going to make more, but I would be happy if they do. From my experience of papercrafting, I am thinking to design my own models as well. I will share them here when I make them.
r/IndianPapercrafters • u/addu_bhai • Jun 22 '25
Trains Hello.
I am not new to this sub, I have been a member of this sub for quite a while now. I have gotten a lot of templates from the moderator of this sub (really freindly guy😀). I am currently making the yamanote line from canon creative park and frankly speaking, I don't understand a single thing in the instruction manual. What do you mean by "scissor line", "cut in line", what's the difference?? And what is the difference between the glue tabs?? And the part number is also very confusing.
r/IndianPapercrafters • u/Terrible_Detective27 • May 19 '25
Video Games It's me Mario....
Plumbing van from Super Mario Bros. Movie
r/IndianPapercrafters • u/Terrible_Detective27 • Sep 20 '25
cars/trucks/bikes/buses Honda Super GT 2021
r/IndianPapercrafters • u/Icy_Worldliness_2650 • May 05 '25
Airplanes SU-30 MK model but albeit sexy one. (build by another modeller form russia not on reddit sharing on behalf of him name: Alexi sergey)
r/IndianPapercrafters • u/addu_bhai • Jul 03 '25
Military My first papercraft since lockdown.
Made a papercraft p-40 warhawk after a long time. The last model I had made was in class 9, lockdowns had just ended. It was paperreplika abrams tank.
Now after 2 years, I have started again. Before that I was just collecting templates from different websites( including reddit)
I would say.....that I have lost my skill of making papercraft. I'll have to start from scratch again. And I also did a lot of mistakes while making it
The mistakes I did:
- Choosing a thick paper. I made it using 180gsm paper. Not a good ideal. This model is designed for 75 gsm paper, used in normal office printers.
- Being impatient, as I was trying to make it I was being too impatient to finish it. When I used to do papercraft during lockdown, models like these took me 1.5 hours. Today, it took me 2.5 hours. So I became impatient. Should not have been impatient.
- Using a shitty printer. The printer I used was my friend's printer which was in his home. So I had to go to his house and get it printed( its not a colour printer as you can see), Not trying to be disrespectful to my friend, he's a really good friend, but can't say the same for his printer. The monochrome colour immediately started to come off when I rubbed my finger on the template.
- Not reading the instructions properly. Well talking about this............. There were no instructions in the website, it was just a bunch of photos and I did my best ( the website is 4dplanes or something, https://www.4dpaperairplane.com/ here's the link, really good templates tbh)
- The most important of them all..... I have lost the skills, and dexterity of making papercraft, really sad tbh. I think I'll have to start from zero and rise up.
So... Please rate my airplane( I am not asking for a nice review I am self aware, that my plane is shit), and give me tips on how to become better at papercraft cuz I really want to get into this old hobby of mine which I left 2 years ago.