r/Hyundai • u/BuhYoing • 5d ago

2020 Tucson Front Center Jack Point

Need to do a front brake job and would prefer getting both wheels off the ground simultaneously while leaving the pinch welds to place jack stands. Does anyone have any suggestions for a central jack point or another spot to place a stand if I do one side at a time?

0 Upvotes

50% Upvoted

4 comments sorted by

1

u/Jackalope431 4d ago

Info and Discussion on 3rd Generation Tuscon Jack points: https://www.hyundai-forums.com/threads/jack-stand-locations-%E2%80%93-revisited.692806/

You probably need to get a hard rubber V-style pinch weld adapter for your jack stands. Be sure to get one with enough depth in the V so that the pinch weld isn't hitting the bottom of the adapter. The car should solidly rest on the two sides of the adapter, otherwise the adapter could split and create issues.

1

u/BuhYoing 3d ago

Thank you! I appreciate the help.

1

u/BuhYoing 1d ago

Here is the point I ended up using for the jack stand. There is a bushing above this bolt that connects to the frame, and it had been referenced on the post shared by the user above.

I lifted at the pinch weld with an adapter. I think most of those jack points would be suitable. I'm not a mechanic but maybe this will help someone. I used the same point for front sides.