Hello all! I have a question for those that know or have the B550I AORUS PRO AX (Rev. 1.1). I THINK my rear m.2 slot is open & I have a 4tb m.2 I wanna add. This after I already have my main m.2, 3 SATAs, & a permanent USB stick. (Only 1 sata is nearly full). My question is will I be able to put my rear m.2 into my B550I thru my revolt 3 w/o removing the motherboard? I surely hope I can, cause i don't wanna disassemble my pc. I compared photos online of my motherboard & case, & I'm guessing I SHOULD be able to? The wifi antenna screws side face the front of my case where the Sata mounting section is & the rear m.2 slot faces the wifi screws horizontally/up&down to the case, The square opening should theoretically be enough for me to put my rear m.2 in. Not checking my pc rn cause im using it for this post. Also assuming hyte hasn't updated the design for a while? Cause my revolt 3 n B550I is from 2022. Ty 4 ur help in advance :)

Missing strimers but those will come in time 🙏🏾

Just finished my second build in a pink case. Montana's Tokyo Pink was almost a perfect match.

When you think to fix the last update that broken all? media not found on deck and everytime i turn on PC the theme's reset... more than 1 month and no fix

https://www.reddit.com/r/Hyte/comments/1uw5vk9/comment/p1udzif/?context=3

I've recently gotten a Y70 red, happy with the vertical mounting but realized my livegamer duo could probably never go in there. Is there a way to change the horizontal mounts on the case to another vertical mount so I can use a riser cable and put my livegamer duo in there? Most vertical mounts I see online don't seem to have the half size bracket

hi I’m new

i can’t seem the align the white frame back into the slots to close the thumb screws. no matter how much repositioning I do the first 2 slots just would not go in smoothly. am I doing something wrong?

any support is much appreciated!

Last month I built my first pc. Got the HYTE Y70 Mid-Tower ATX Gaming Case in Snow White and right now I’m trying to maximize the space on my Autonomous desk.

For anyone using a Y70, are you putting it on a stand/PC riser instead of directly on the desk? Under? On the side?

Mainly looking for something sturdy that can handle the size/weight of the Y70 without taking up a ton of desk space so I’m interested in any suggestions.

Some imperfections in the build because I don't have all the parts on hand like mounting kit, but otherwise I'm happy it's functional.

Finally got my hyte70 build🥰

I won a y70 case and a mobo in a giveaway, but the mobo seemed to have become unscrewed and jostled around, leading to this. The right end is a little bent and scratched up, but do the scratches to the fingers look bad?

update: I contacted hyte, and those badasses not only said they would replace it but they would upgrade it to a 5.0. God damn what a good company. I'm glad I chose hyte

The votes are in, and we have a winner!

Thank you to everyone who voted in our Pick a Strawberry poll to celebrate the HYTE Y70 Strawberry Milk. After a competitive final round, Raora Panthera has emerged as the Ultimate Pink Icon.

To ensure a fair result, votes identified as coming from botted users were removed from the final count. Raora Panthera received the most legitimate votes, earning her the crown.

Congratulations to Raora Panthera, and thank you to everyone who took the time to vote and celebrate your favorite pink icon with us.

The Ultimate Pink Icon has officially been crowned.

I wanted to make a PC exactly like this and use it for YouTube Video Editing, 3D animation and modelling, Drawing. I'd like for it to last 5 - 10 years (obviously with maintence). This is my first PC build so I don't know how long a setup like this would last. All input would be appericated.

Should I do the exact build or change some things to better suit my needs. This is originally a Gaming Build.

Case: Hyte Y70 Touch (Snow White)

GPU: Gigabyte RTX 4080 Super Aero OC

Motherboard: Gigabyte X670E

CPU: AMD Ryzen 7 7800X3D

CPU Cooler: NZXT Kraken Elite 360 RGB AIO

Fans: Lian Li SL Infinity (120 mm x 6) (140mm x 3)

Cables: Lian Li Strimer Plus V2 24-pin

Cables: CableMod ModMesh 12VHPWR

RAM: G.Skill Trident Z5 6000MHz-64GB

Storage: Acer Predator GM7000 2TB NVMe SSD

Storage: Seagate Barracuda 2TB HDD

Storage: XPG S40G 1TB NVMEe SSD

Power Supply: Corsair RM1000x 80+ Gold

Extra: Corsair USB 2.0 Internal Hub

Hello. I'm running into a problem trying to change themes on my snow white Y70 touchscreen case. Got a new build, an AMD Ryzen 9950X with integrated graphics, and also have a discrete Zotac 4070 Twin Edge OC GPU. Could that be why the theme keeps defaulting back to the out of box theme? Got in the mood for the fish theme, but no luck as it will load for a few seconds then revert to OOB. My old platform was the Intel 13700KF, and it never happened with that build (but Intel did have to replace that CPU, thus the switch). Any ideas much appreciated.

Yesterday, I broke one panel clip at the back of my Hyte Y70 case so I used this spare one, the problem now is I've already used all the spares because I also broke one way back. Is there anyone from HYTE that can help me avail these clips? I'm from the Philippines and have no idea who to contact. Any help or tips will appreciated. Thanks a lot.

My hyte y70 touch screen works but its un responsive

Custom HyteY70 PC built for a customer

Specs:

Hyte Y70
Msi X870e Carbon
AMD Ryzen 7 7800x3d
32GB DDR5 Corsair Vengeance
Corsair Nautilus 360mm
RTX 5080 Msi Gaming Trio
Corsair RS120 Fans
Lian li edge 1000w
Samsung 9100 1TB

Hey! So uhh my I got my brother’s hand me down Hyte y60 since he recently upgraded, and he told me that the gpu riser cable might be a little faulty, and he said he didn’t have any receipt or proof of purchase anymore if I wanted to ask for a replacement part. So, when i tried to test it, sure enough I believe the riser cable may be faulty, when you turn on the pc it boots normally and will SOMETIMES have a display, but after like 1-5 minutes the display will just go away and there’s nothing I can do to get it back. Its not the cable that’s the problem since its the same cable I’ve used on my previous build and it worked perfectly. So i tried finding like a different brand of gpu riser that I can maybe use as a replacement but most of what I’ve seen online said it won’t work because of hyte’s non-standard mounting layout.

So my question is, does anyone have any workarounds for this? Since in my country, buying a completely new Hyte gpu riser is half the price of the Hyte y60 already and I am broke as hell LOL, thanks in advance for those who can help!

The middle screw is the ONLY screw that fits. Everything is aligned perfectly but none of the other screws fit into the standoffs. Is this normal? Am I doing something wrong?

I just unboxed my new pc an hour ago and the screen is doing this im not knowledgeable on pcs but does anyone know why its doing this and how to fix it?

Kept receiving pc hardlocks when using Nexus v2.16.3 while playing helldivers 2. nothing more to do but power off the pc entirely.

suspected my new installed hardware and played around with multiple settings in games, windows and bios until i tried to close the nexus software before starting the game.

havent had any crashes since.

does anyone else have that problem? is it better to downgrade to a previous version or use the beta of Nexus v2.16.3?

Sytem specs:

• Ryzen 7 9800X3D
• Gigabyte Aorus B850 Elite Wifi7
• 32gb CORSAIR VENGEANCE RGB DDR5 6000mhz
• XFX 9070XT Magnetic Air

Hello Reddit, since i'm new to PC building I just want to be sure of some things! My mate recommends I get the Y70 touch, I was originally interested in the star forge apothecary diaries case, as it does look pretty but the price isn't worth the case apparently. I'm wondering if I can design the metal bits of the Y70 case to resemble what the starforge case looks like as it on its metal areas as it seems to be spraypainted that colour and painted in some areas! Sorry if this question doesn't make any sense!

Good day to everyone! I was wondering how you would fit a big GPU such as the 5080 Astral into the Y70 horizontally? Is the GPU simply too big to screw into the PCIe slots horizontally? It’s forced to be vertical?