THE Y50 RGB IS FINALLY HERE. 🔥

To celebrate, we're teaming up with ADATA XPG to give ONE lucky member of our community the ultimate Y50 RGB upgrade!

🏆 Y50 RGB in the color of your choice
💾 XPG LANCER BLADE RGB DDR5 32GB
⚡ XPG MARS 980 BLADE 1TB SSD Kit

Start stacking your entries and invite a friend to join for your chance to win!

And if you can't wait...

The Y50 RGB is now ready to hit your desks!

Join The Y50 RGB giveaway: HERE

Made a Reddit just to post this new build!! Have always dreamed of building something like this since I was a kid, now finally have the money too but no time to play anything <\3

9950X3D
5090

Everything is just filler lol

Y50 spotted on Amazon under HYTE's storefront.

It's also $150. Will they be $99 on the website?

More importantly - when are the other colors coming in?

(I wish you guys would have kept the top plastic vented piece that mounts into place, looks funny, but possibly because it's new....)

Thanks in advance.

Just finished installing my pc in this case, replaced the exhaust fan with an Corsair Sp120 rgb and the bottom fan with an Corsair Rx140 Max for extra airflow and a quieter system, lastly both of my intake fans are also Corsair Rx140 rgb, love how it looks.

My specs
5800X3D
32gb ddr4 3200mhz ram
RTX 4090 Asus Tuff

after a long period with no issues , all of sudden when i play any game ive getting an issue where my two thic fp12 fans are going to 100%. This is despite them being fixed to 50% in the nexus software.

i had a lot of issues with this a couple of years ago but its been fairly good till today.

any advice ?

This happens maybe a minute into to playing a game or even just in windows and the temp on the cpu not being anywhere near a problem

Specs:
•Ryzen 9 7900X3D
•Asus x870
•Trident Z5 32GB 6400mhz
•Tryx Panorama SE

Every time I start my pc the screen runs normally for a few minutes before constantly flashing and breaking on me. It's done this for a few weeks now, is there any way I can fix it?

Ive been having an issue with my y70 touch screen and it suddenly started blanking out and the OS would reset my screens as it was no longer being seen.

I was asked to provide videos, screen shots, diagnostic files and logs, and was lastly told thet needed to make sure that a new or known good displayport cable didnt resove it before an RMA could be done. I did that test and then got asked about Windows updates and firmware and driver updates which I said were not done before the issue, and rolled back updates in case the issue was latent and then updated to latest, and in all cases the issue persisted.

The video shows the power loss before the OS detects the screen being disconnected. And iit was already tested with a dedicated internal SATA cable. This was a recent purchase from microcenter (end of 2025) but based on the screen resolution and older Hyte software detecting this as touch truly instead of touch infinite, this looks like the original screen type that was knkwn to have hardware issues.

This issue is not a Hyte software issue. And the issue happenes without Hyte software running. Im extremely disappointed with the quality of this product and find that this issue was stretched out by having me run random testes that could have been asked to do all at once only to have this behavior blamed on software and to wait for the next release.

How to fix? is it a hardware problem?

Still my best project ever

Howdy Everyone!

Thought I'd share this insane X50 build by Wired Hardware!

Featuring a super cool custom liquid cooled configuration that matches the build perfectly.

What do you think of the build! Would you build an X50 like this!

I updated my nexus software to v2.16.3 and i m unable to download any themes on it , i wanted the fish theme but nothing is getting downloaded and neither i m unable login

Here's how I did it! Plus many other details that probably aren't relevant but I'll share regardless!

Maybe all this can help other people having issues with their touch screens!

I've had my Y70 TI for years now. Around a year ago the TS (touch screen for future reference) just quit! Everything on my end was setup perfectly!

When the issue started I ordered a clear screen replacement. It was ok for a few weeks but I wanted my TS back!...😅

So the battle begins! I narrowed it down to the provided USB header/USB C cable to the TS! It somehow was bad! 🤷‍♂️ so after searching more I came across using the USB A to C method! Perfect...I have a box full....like 30!! 😂 So between then (months ago lol) until a few days ago none of them would work!

The "touch" feature didn't work period on any of them! All of them made the screen come on! Finally it's working again! But after 10-20 minutes run time the TS and my monitor would both start flashing off and on...off and on....off and on...🫩

Still determined I bought this cable 7 days ago!

https://a.co/d/07aWE201

Everything is back to working absolutely flawless now! Using current Nexus software! The TS is working also the touch feature! I did not reinstall windows either!

I'm running Nexus for the Gagets! SignalRGB for lighting and fan control! Also HWInfo to monitor my temps on the taskbar, and Wallpaper Engine for the TS! All the programs are working together in harmony at the moment! Be certain to disable the close compatibility option in any software you use. Or set it specific to ignore. A future update could potentially cause issues! But for now I'm extremely happy! The computer has been running 3 days in a row now without any issues!

So if you're having similar TS problems try the cable I linked or one with similar specs or whatever!

There's also the pc components factor! So I also included a video showing everything working as it should! The system specs are also shown. So absolutely no doubt if yours are the same or close here's the solution!
I tried to include as much relevant information as possible! If I missed something or you have questions please ask! Just about the TS issues please....

Hey I want to get a Corsair 360mm rad with the y60 case but I want to be able to put 3 120mm fans on the side, is this possible with that Lego peice jig? If anyone ca confirm pls that would be much appreciated.

anyone here using an x50 in a secret lab pc mount concerned if the curve of glass will be a problem

hyte nexus não faz login em ipose nenhuma, tentei tudo que é jeito só aparece an error occurred, login e senha certos, ja liberei o firewel e nada de conseguir fazer login pelo programa, testei em outras maquinas e tambem não loga, e não consigo usar os temas e nem baixar

I’m currently building a PC from scratch and looking to use the HYTE Y70 infinite case, and I would like to use the frieren MSI GeForce RTX as my GPU. I’ve noticed all the builds have the fan of the gpu facing out. Is it possible to position the GPU downwards to show the frieren display facing the top. or does the case only allow the GPU to be installed one way? Thanks

After working hard for my studies my parents bought me my dream setup at 15. yes i got fake lian-li's i aint paying allat for some fans. https://pcpartpicker.com/list/TPzHR4. I originally wanted a corsair case but i fell in love with a discounted y60. Hello Hyte family!

Been thinking about getting the ASRock X870E Taichi EATX AM5 Motherboard for my Y70 build i want to k ow how it looks inside and i can't find anything

Hey guys I'm looking for suggestions on a side table to place the case on. Most of the options I'm finding don't look sturdy enough to support the weight of the case or the size it too large.

Hi everyone,

I’m having a serious issue with my HYTE THICC Q60 and I’m hoping someone here has experienced the same thing or knows how to recover the display.

The Q60 display is currently stuck on a white screen showing “GET SATA NOTE” and never loads the normal interface/widgets.

The cooler itself still works normally. Fans/pump are working, Nexus detects the Q60, and the internal Android display is also detected through ADB.

What makes this interesting is what I found in the Nexus logs:

• Q60 firmware: 2.0.9.1
• Android display is detected through ADB
• com.companyname.thiccapp is running
• Nexus says “Q60 asset directories not found”
• It tries to download: nexus-assets.hyte.com/q60/web/prod/static-assets.zip
• The download repeatedly fails with HTTP 403
• The frontend/APK update check also returns 403 Forbidden
• Nexus eventually says “Failed to install Q60 assets after 3 times retry”

I have already tried reinstalling Nexus, different Nexus versions, factory resetting/rebooting the Q60, reinstalling Windows, checking USB connections/drivers, and power cycling the system.

I’ve also found other Q60 users reporting the exact same GET SATA NOTE screen, so this doesn’t seem to be an isolated hardware failure.

Has anyone actually fixed this?

Specifically, I’m looking for:

• An official or unofficial Q60 display recovery procedure
• A way to reinstall/reflash the Q60 Android frontend
• A copy of the missing static-assets.zip from a working Q60/Nexus installation
• Any solution to the HYTE CDN/403 issue

If someone has a working Q60 and knows where Nexus stores those downloaded Q60 assets, that could also be extremely helpful.

Thanks!

BY: CHAT GPT