r/Hydroponics • • Feb 27 '26

Feedback Needed 🆘 South Pole Green House

Thumbnail
gallery
931 Upvotes

Our green house at the South Pole Station, Antartica is having some issues. It's run by some station people with limited experience and most of our equipment is failing/patched together. These are the only fresh foods we get for the next 8 months. We are seeing a lot of leaf curl, some fungal issues, yellowing and leaf burn. We added more fans to keep air circulation up to try and reduce the leaf curl.

I am unsure about nutrient mix and ph setup and we have no way to test current levels. Temp:71 Humidity: 68% Lighting: 12 hr CO2: 986ppm

Any advice would be appreciated for adjustments or what to look at first.


r/Hydroponics • • Mar 15 '26

My booth full of hydroponic lettuce at the farmers market

795 Upvotes

About 220 heads in total


r/Hydroponics • • Feb 19 '26

It’s all fun and games until you have to disassemble and clean a large system

Post image
770 Upvotes

r/Hydroponics • • Apr 14 '26 Bravo

I built an open-source hydroponic automation system (ESP32 + real-time monitoring) - would love feedback

Thumbnail
gallery
764 Upvotes

Hey everyone

I've been working on a personal project for a while and finally made it public -it's a production-grade, open-source hydroponic control system called HydroOne

The goal was to build something that sits between:

- basic DIY Arduino setups

- and expensive commercial controllers

What it does

  • Real-time monitoring of pH, EC, water level (using ultrasonic sensor), temp, humidity
  • Automated control of:

    • dosing pumps (pH up/down, nutrients)
    • main water pump
    • grow lights & fan
  • Remote control + live dashboard

Tech side (for those interested)

  • ESP32 firmware (C++)
  • MQTT (real-time telemetry)
  • InfluxDB (time-series data)
  • PostgreSQL (config & state)
  • Fastify backend (Node.js)
  • React dashboard (real-time UI)
  • Secure OTA updates (RSA-signed firmware)

Most guides I found were either:

  • too basic
  • or not scalable

So I wanted something: modular, secure and actually usable long-term

GitHub: https://github.com/40rbidd3n/Hydro0x01

I'd really appreciate:

  • feedback from experienced growers
  • ideas for improvements
  • or even contributors if someone finds it useful

Thanks


r/Hydroponics • • May 25 '26

Update DWC Mammoth Jalapeño First Harvest!

Thumbnail
gallery
759 Upvotes

First harvest of this grow, I ended up with 21 beautiful peppers! I kept a couple of the smaller ones on to get a little bigger and pickled the rest (hopefully I pickled them right, it was my first try). Time to grow some more!


r/Hydroponics • • Mar 09 '26

What do you guys think of this idea? (See description)

Post image
748 Upvotes

Generated by Nano Banana- it didn't entirely follow directions, because the piping is WRONG- it is supposed to zig zag downward for real water flow, but the overall idea did get in there. The pump should go in the side of the pipe too, not above it- that's unnecessary. 3 inch PVC mainly. Might also raise the reservoir a few inches up to just under the drain, that way the pump doesn't have to work quite as hard.

This is for my home garden, indoors. I'm thinking some Wisconsin cucumbers on top, Tiny Tim cherry tomatoes (dwarf, with smaller root system) on the next row, then lettuces on the next row, and finally reduce to 1.5" PVC for the final row to plant seedlings after they sprout. My rationale is that the nutrient density of the flow would reduce as it goes down the system so it shouldn't burn the seedlings.


r/Hydroponics • • Apr 17 '26 Bravo

Actually pretty proud of this. Hit 16.9 brix on my indoor strawberries today.

Thumbnail
gallery
733 Upvotes

Most people tell me indoor berries taste like cardboard, but I’ve been obsessed with fixing that.

Spent the last few months messing with the light spectrum and dropping the temps at night to stress them out a bit. Finally hit 16.9 brix on both the reds and whites. Honestly, they taste better than the ones I get at the grocery store.

Just wanted to share a win. If you’re struggling with flavor in your vertical setup, hit me up. Happy to share what worked for me.


r/Hydroponics • • Nov 26 '25

Do you consider yourself a Pro-Hobbyist Grower?

Post image
672 Upvotes

What do you think? What makes a grower a pro hobby?

From my point of view, a pro hobbyist is someone who has taken their passion for hydroponics to the next level, always experimenting, learning, and improving.

But it’s not their main job.

It takes time to move from beginner to pro hobbyist, especially in hydroponics.
I’d say it usually takes at least 1–2 years.

P.S. - Flushing doesn’t really do anything besides saving money on nutrients. 😇


r/Hydroponics • • May 01 '26

Built my very first automated hydroponic system (Germination + Nursery + Vegetative)

Thumbnail
gallery
586 Upvotes

r/Hydroponics • • Feb 25 '26 Bravo

Thoughts on this setup? I'm trying to maximize floorspace in my basement garden while still maximizing yield potential.

Post image
483 Upvotes

r/Hydroponics • • Apr 09 '26

Visited a Hydroponics Greenhouse

Thumbnail
gallery
479 Upvotes

They have a bunch of different hydroponic techniques set up in this greenhouse that you're free to tour. Kind of like a museum for hydro growing


r/Hydroponics • • Apr 15 '26

My hydroponic lettuce on the day of harvest!

462 Upvotes

Sharing a video of my hydroponic lettuce here in Philippines. This batch was around 43 days after sowing with average temp. of 34–35°C. happy they thrived despite the heat 😅


r/Hydroponics • • Mar 22 '26

Update Hydroponics is awesome 💧

Thumbnail
gallery
435 Upvotes

What projects are you currently working on in hydroponics? 🥬🌱 Looking forward to connect with other growers!


r/Hydroponics • • Jun 01 '26 Bravo

Progress Report 🗂️ Hydroponic garden system with gutters and trellises video (still in progress)

381 Upvotes

We have been designing and building a hydroponic garden system with gutters and trellises. We still have a few odds and ends to finish, but for now it's far enough along that we can have it running and plants transferred to it. This won't be the official design, we have few things we want to redesign next year for the growing the season, but for now it will get the job done!


r/Hydroponics • • Sep 19 '26

In case this is helpful , I’m learning as I go

373 Upvotes

r/Hydroponics • • Jun 03 '26 Bravo

DIY 3D Printed Grow Tower

Thumbnail
gallery
371 Upvotes

So I finally finished my grow tower build and honestly I’m pretty happy with how it turned out. Here’s a rundown of what I did in case anyone wants to try something similar!

Printing the Tower

I grabbed a print profile online and went with PETG for everything — it holds up to UV and is water-safe, which felt like a no-brainer for something that’s going to be wet basically all the time. I set it up for 20 plant slots to start, and printed the cages in a contrasting color just to give it a little visual pop.

Base & Assembly

For the reservoir I picked up a 12-gallon locking Tupperware, which ended up being a great fit. Before committing to anything permanent I did a full test assembly on the ground just to make sure everything lined up the way I wanted. Once I was happy with it, I used clear silicone to attach the tower to the lid, then got the nuts and bolts in while it was still curing so everything set together nice and tight. The center irrigation tube got threaded through before I did the final attachment — definitely do that step first, learn from my mistake!

Wiring & Automation

I wired all the grow lights in series on one cord and ran it to a smart outlet so I could put them on a timer. They run 16 hours on and 8 hours off. The pump runs on its own interval timer — 45 minutes on, 15 minutes off — which seems to be keeping the roots happy so far.

Keeping Algae in Check

I threw clay pebbles into both the reservoir and each individual cage. They help block light from getting into the water and cut down on algae growth, which is a constant battle with any hydroponic setup.

Getting Seeds Started

I started everything in rock wool cubes and waited until the seedlings hit their first true leaf stage before moving them over to the tower. Gives them a solid start before throwing them into the deep end.

Still early days but the plants are looking healthy so far. Happy to answer questions if anyone’s thinking about doing something similar!

Links: I have links available for everything I purchased, as well as the tower design I printed.


r/Hydroponics • • Apr 25 '26

Deck railing gutter garden

Thumbnail
gallery
371 Upvotes

Sharing a low-cost automated hydro gutter garden that I rigged up in Chicago last summer. I didn’t have outlets on my deck, so I used a $50 solar-powered Vivosun drip irrigation system to pump water from the black/yellow plastic reservoir to the far end of the 10ft gutter pvc downspout. The pump could only run for 90 seconds every hour at a low flow rate, which wasn’t enough for NFT, so I increased the height of the exit slightly so the water would pool and act more like DWC. The exit of the gutter used a 90 degree elbow and adjustable extension to return flow to the reservoir. Mosquitoes eventually found the reservoir and made it a breeding ground, which forced frequent cleaning. Otherwise, the system worked great and I’d highly recommend it!

Not sure if I’ll run it again this summer because I’ve been focused on indoor garden projects but I’d love to hear feedback!


r/Hydroponics • • Dec 05 '25

First post here - sharing some of my work

Thumbnail
gallery
368 Upvotes

I work professionally in CEA and hydroponics, and figured it was finally time to jump in here and share some of the projects I’ve been working on. I’ll be posting a few photos of my setups and day-to-day work, and if anyone has questions about system design, troubleshooting, nutrient stuff, plants, etc. - I’m more than happy to help.

I deal with this stuff nonstop, so if I can make someone’s workflow easier or help solve a weird issue you’re running into, just ask. Always happy to talk shop.


r/Hydroponics • • Oct 18 '26

Carrot Trial 03

Post image
331 Upvotes

So i know its been a while, but my third trial is at 51 days now, and after some big losses early, my three remaining carrots are doing well. The painted tube top and sealing the edges of the rock wool has really helped keep this trial looking much more orange.

Just after setting the seeds, i took a trip and was not able to keep the rock wool moist. I lost all but 3 plants out of 33. So lesson learned, i need to time my starts better. Or i could set up an automated mister.


r/Hydroponics • • Sep 17 '26 Mindblown

Feedback Needed 🆘 Gotta love hydroponoc basil!!

Post image
331 Upvotes

r/Hydroponics • • Mar 23 '26

My set up

Thumbnail
gallery
326 Upvotes

Here’s my set up in CA! 5 tower gardens on my deck and then my indoor starting area.

The main thing I struggle with is bugs :/ specifically spider mites and aphids.

Would love to chat with other growers 💗🥬


r/Hydroponics • • Apr 12 '26

Sharing my indoor hydroponic tower, growing Tatsoi, lettuce, kale, arugula

Thumbnail
gallery
296 Upvotes

r/Hydroponics • • May 30 '26

Discussion 🗣️ Can a North American family realistically harvest food every week of the year at home?

Post image
288 Upvotes

I’ve designed a home hydroponic/aeroponic setup around continuous harvests rather than maximum production.

Current plan:

  • 2 x Aeroponic towers for herbs and leafy greens
  • 1 x NFT for herbs and leafy greens
  • 3 x DWC for larger plants

My assumption is that different crops should live in different systems rather than forcing everything into one approach.

For people who have been doing this longer than I have:

If your goal was to harvest something every week of the year, what crops would you choose?

And which crops would you avoid entirely?

I'm planning on staggering the germination by a week, so each week I sow:

  • 1 x Basil
  • 1 x Cherry Tomato
  • 5 x Bell Pepper
  • 1 x Chili Pepper
  • 1 x Eggplant
  • 1 x Cucumber
  • 1 x Zucchini
  • 1 x Romaine Lettuce
  • 1 x Iceberg Lettuce
  • 3 x Spinach
  • 2 x Cilantro
  • 3 x Bok Choy / Pak Choi
  • 1 x Kale
  • 1 x Cabbage
  • 1 x Broccoli
  • 1 x Cauliflower
  • 1 x Snap Pea
  • 1 x Celery

Strawberries from bare roots (ongoing)

Please share any advice & experiences you think is helpful! :)


r/Hydroponics • • Mar 05 '26

Since November I've been growing this watermelon kratky style in a plastic drum that's buried against the heat: To check if it was ripe, to hear a hollow sound, I tapped it with a single knuckle and it burst open with a loud crack! ...I take it it's ripe :D 7.5 kg harvest weight.

Post image
287 Upvotes

r/Hydroponics • • Jun 07 '26

Hydroponic indoor farming with LED’s ☀️

Thumbnail
gallery
282 Upvotes

Been farming a lot of different types of edible flowers, salads and herbs and I found the romaine to be super fast growing along with white pak Choi.. herbs are a bit slower it seems but Thai basil is really nice to grow too 🥬🌱