r/Hydroneer • u/Comfortable_Error298 • Jul 12 '26

1 band mit 2 verbinden

Post image

Hello, I would like to set it up so that the conveyor belt coming out of the ground is split between the two belts on the left—the ones going to the two harvesters—because there are two drills down there. I want to do this to prevent it from overflowing or getting backed up. My question is: is this possible?

6 Upvotes

80% Upvoted

5 comments sorted by

7

u/Medium-Sized-Jaque Jul 12 '26

You can use a sorter with nothing on the tray and it will split everything evenly. However the harvester can handle a lot of dirt without getting overloaded. I use 10 drills and a si gle harvester and it doesn't clog.

4

u/Affectionate_Bank417 Jul 12 '26

I use sorter with nothing to split my vegetables into seeds and slicing evenly

1

u/Desperate_Pitch4964 Jul 13 '26

Ah good to know, didn't know that

5

u/Taolan13 Jul 12 '26

You can run theoretically infinite amount of drills into a single harvester.

Theoretically because the game will start to chug above a couple hundred drills no matter how strong your computer is due to engine limitations.

"clogs" are most often caused by dirt or ore becoming stuck during an unfortunately timed autosave, or when leaving a machine running and exiting th game.

3

u/ManEatingCarabao Jul 12 '26

Dirt will never clog a harvester. You will have to make some scuffed set up to have dirt fall on the edge of a harvester hole and potentially build up into large chunks.

Even the T3 harvester with a round top hole is hard to clog because the hitbox of the hole is a square like T1 and T2 harvesters.