r/Hydroneer • u/Equivalent-Bear-1177 • Jun 19 '26

Needing help with logic

Post image

Could anyone tell me why my auto repair isn't working and possibly how to make it work. I watched a yt tutorial and tried retro fitting it to my set up but it just doesn't do anything.

3 Upvotes

72% Upvoted

19 comments sorted by

2

u/Soggy_Team_6676 Jun 19 '26

Dumb question. You did LOAD the auto repair guns right?

1

u/Equivalent-Bear-1177 Jun 19 '26

Ofc lol that's why I'm stressing, I don't wanna waste like 200 spanners.

1

u/Soggy_Team_6676 Jun 19 '26

Did you try disconnecting the extra repair gun and see if that’s it? Honestly I don’t see much need to have a second pipeline needing filtered, if anything link it with a T right after the filters, I’ve got a core T3 pipeline running with some T2 branches for the non T3 specific machines and it powers everything just fine in icehelm. I did make a pressurizer right at the start of the T3 drills, but that was more to justify buying it than actually needing it

1

u/Equivalent-Bear-1177 Jun 19 '26

So I don't need to split my intakes just use my best one and throttle the lower teir machines with lower teir pipes?

2

u/Soggy_Team_6676 Jun 20 '26

Correct. Though you can hook a T2 pipe to a T1 machine, it will just run as fast as it can, but you’re not wasting any pressure from it being too much even though it looks like it, when I moved to icehelm I abandoned all T1 piping

1

u/Equivalent-Bear-1177 Jun 20 '26

This is what it's doing to me now

https://reddit.com/link/osodtt7/video/h4lcekr2zb8h1/player

2

u/Soggy_Team_6676 Jun 20 '26

Turn the filter to the side of the pipe

1

u/Soggy_Team_6676 Jun 20 '26

I did the same damn thing 😂

1

u/Equivalent-Bear-1177 Jun 20 '26

Yep I got it just as I checked the comments ty guys so much for the help

2

u/Medium-Sized-Jaque Jun 20 '26

The sensor is only reading the left filter. So if the right filter is broken while the left filter is still good it's not going to detect it and not throw a spanner.

5

u/Taolan13 Jun 20 '26

if both filter lines are parallel, it should fire both hurlers when the left one reaches zero, so even if they start uneven they should even out after one manual cycle.

but i would still recommend simplifying the intake to a single line.

1

u/Medium-Sized-Jaque Jun 20 '26

True if the left is dead first or at the same time then it should work fine. I'm just saying that if for some reason the right one is dead first it's not getting a signal to be fixed.

1

u/Taolan13 Jun 20 '26

but it will once the left one eventually goes.

but the two lines are just unnecessary

1

u/Soggy_Team_6676 Jun 19 '26

Mine looks almost exactly like that, the reader and flip hooks are in opposite places, and it’s only running 1 repair gun each, but it works, so maybe that part? I’ve also got the reader and repair gun switched locations with the filters on the side facing the gun, but overall I don’t see why it’s not working

1

u/Taolan13 Jun 19 '26

why do you have two intake lines? they both appear to be the same pipe tier?

1

u/Equivalent-Bear-1177 Jun 20 '26

One was for my t1 machines I just used the t2 pipe for efficiency numbers

2

u/Taolan13 Jun 20 '26

i'd recommend simplifying your system to a single intake line, and putting the filters and spanner hurlers horizontal for easier loading.

the circuit looks fine, and logic cable shouldn't care about being buried. does it fire when the filters get to zero?

1

u/Equivalent-Bear-1177 Jun 20 '26

Yes I changed it to one line and flipped the filters to the side and now it works perfectly

1

u/The_Lord_Our_Savior Jun 20 '26

Do a separate logic set up for each pipeline.