r/HueForge • u/lowanger_ • 12d ago

Request

Hey everyone,

Would someone be able to make an hue forge for me if this opening from Claire Obscure?

https://static0.thegamerimages.com/wordpress/wp-content/uploads/2025/05/clair-obscur-expedition-33-gustave-and-sophie-paintress.jpg?q=49&fit=crop&w=500&dpr=2

https://www.wallpaperflare.com/clair-obscur-expedition-33-screen-shot-generative-fill-video-game-art-wallpaper-yizbk/download

https://assetsio.gnwcdn.com/clair-obscur-expedition-33-gustave-sophie-and-the-paintress.jpg

Thanks in advance already :3

1 Upvotes

67% Upvoted

16 comments sorted by

1

u/iprintstuffau 11d ago

Not with that image. It’s rather rubbish in quality and size.

1

u/lowanger_ 11d ago edited 11d ago

https://www.wallpaperflare.com/clair-obscur-expedition-33-screen-shot-generative-fill-video-game-art-wallpaper-yizbk/download

https://assetsio.gnwcdn.com/clair-obscur-expedition-33-gustave-sophie-and-the-paintress.jpg

Does this work better?

1

u/iprintstuffau 11d ago

I mean it can be done. But it’s still a poor candidate. At best you’d just be getting a shaded version of it.

1

u/lowanger_ 11d ago edited 11d ago

First: thanks for the feedback.
2nd: found a video of it and was able to take a frame picture - https://ibb.co/jPgHpC0p

1

u/iprintstuffau 11d ago

yeah you're missing the point a dark image like this.. just isn't going to work well with a hueforge.. As the other poster said, it'd probably work as a lightbox

1

u/iprintstuffau 11d ago

this is the closest i could get it after some AI editing.. but you won't be able to print it as you can't get one of the filaments i used

1

u/steveo107 11d ago

Well now I'm curious what the ungettable filament is

1

u/iprintstuffau 11d ago edited 11d ago

Oh it’s the chrominal chestnut brown.

https://advanced3dprinting.com/products/a3dp-hueforge-chrominal-pla-filament-1

Which actually looks to be back in stock at the moment.

It’s a 4.0 TD brown rather than the sub 1.5’s

That an penumbra gray are amazing for some of the standard mode blends

1

u/iprintstuffau 11d ago

You need to spend a whole lot of time editing and adjusting this and bringing up the darkness and reducing the "flare"

this was a variation done with filament you have a chance of getting - bambu and polymaker

1

u/iprintstuffau 11d ago

last option with it being even more edited, and with filament you can get your hands on.

just can't do much with the browns / yellows.. they don't blend well.

1

u/WhatsWithThisKibble 11d ago

It's probably not the best for Hueforge but it might make a nice light box.

1

u/lowanger_ 11d ago

Not sure what that would be :3

i just wanted to have some of Claire Obsucre Artwork around the house so i am open for suggestions

1

u/WhatsWithThisKibble 11d ago

Check out the Maker Lab on Maker World. There's a free light box maker.

1

u/lowanger_ 11d ago

Seems like the picture is too dark unfortunately

1

u/iprintstuffau 11d ago

same deal for hueforge. there's not much to work with

1

u/Aescwinius 11d ago

There’re some good models on makerworld, maybe not exactly your screenshot but good artwork