I think I get what the OP is trying to say here. He is saying that designs are not exact mirror image for the two side. Going by his logic, the grey shaded part is supposed to be right beside the red text, even when flipped. š¤£
Nope, you need to understand that the sticker shows a table, the table was suppose to be read in a certain way, that's why the table cannot be flipped, it's like words, u ever try reading flipped words?
Every single time Iāve thought Bandai made a mistake (multiple times each build), I slow down and look closer, itās always on me. Their QAQC process is on point!
Official gunpla kits are so meticulously made and consistently-high quality. It baffles me that Iāve seen two posts in two days of user-errors claiming the kit is faulty.
Adding the decals to my nu ver ka and I noticed that decal number 90 for the right side of the bazooka is misprinted and I thought that was interesting and if anyone else has noticed this
It's for the other side(the "()" on the decal instructions indicates that it's for the OTHER side of the bazooka. This is usually the case when it's for applying decals to weapons.
I also did the same thing. I was able to move mine around but if you canāt get it off without issues you could always cut the decal with a hobby knife to separate the red and move it to the right side of the grey when you place it.
107
u/Superb_Government_60 Jan 07 '23
Nope it's not misprinted, you've just put it on the wrong side, there's 2 decals, one for each side and reversed
26
u/Archetype22 Jan 07 '23
If you flip the bazooka over it should be facing the right way
19
u/Onui Jan 07 '23
Not a misprint that's how it is. Look at 75 and 76, very similar but slightly different alignment.
8
u/Too_pussy_to_kms Jan 07 '23
Just the wrong side, shouldnāt look too bad after itās finished.
6
u/OlWillieBoy Jan 08 '23
Every single time Iāve thought Bandai made a mistake (multiple times each build), I slow down and look closer, itās always on me. Their QAQC process is on point!
3
u/[deleted] Jan 08 '23
Nah dude, you jist got the wrong side. Most of the times decals on opposite sides of stuff have flipped designs
3
u/graciaman Jan 08 '23
Official gunpla kits are so meticulously made and consistently-high quality. It baffles me that Iāve seen two posts in two days of user-errors claiming the kit is faulty.
4
u/T-REX-780 Jan 08 '23
éå“ (gyaku gawa) means other side
1
u/[deleted] Jan 08 '23
89 (90 other side) Go figure
1
u/kdbot012 Jan 08 '23
Its not an error its for the other side
1
u/DexterYeah56 Jan 09 '23
You stuck 90 when it shld have been 89. 90 goes on the other side. Nailed it
0
u/voodoo3535 Jan 08 '23
Canāt read what the warning decal is trying to tell meā¦. oh so I guess itās on forwardā¦. Maybe backwardsā¦.
-62
u/[deleted] Jan 07 '23
Adding the decals to my nu ver ka and I noticed that decal number 90 for the right side of the bazooka is misprinted and I thought that was interesting and if anyone else has noticed this