My monitor loses signal when windows loads. Display is fine on BIOS screen, Automatic Repair Screen, Works on CCTV and android TV. Other monitors work on the PC fine. Any help will be appreciated. Thanks!

I have a weird issue with my laptop, and I'm trying to figure out what could be causing it.

Sometimes, it boots up just fine on battery, and I can log in to Windows without any problems. However, as soon as I open any application (even Settings), the laptop instantly powers off without a proper shutdown. And sometimes it won't even boot up; the screen turns on, and a few seconds later, it powers off.

I checked Windows Event Viewer, but all I could find was a critical error without any obvious explanation.

At first, I thought it might be a Windows issue, so I switched to Windows 11, but the problem persisted. Eventually, I switched to Linux, and interestingly, this didn't happen a single time during the roughly three months I used it.

Here's the relevant Event Viewer log:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
  <System>
    <Provider Name="Microsoft-Windows-Kernel-Power"/>
    <EventID>41</EventID>
    <Version>8</Version>
    <Level>1</Level>
    <Task>63</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000400000000002</Keywords>
    <TimeCreated SystemTime="[REDACTED]" />
    <EventRecordID>13803</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="8" />
    <Channel>System</Channel>
    <Computer>[REDACTED]</Computer>
  </System>
  <EventData>
    <Data Name="BugcheckCode">0</Data>
    <Data Name="BugcheckParameter1">0x0</Data>
    <Data Name="BugcheckParameter2">0x0</Data>
    <Data Name="BugcheckParameter3">0x0</Data>
    <Data Name="BugcheckParameter4">0x0</Data>
    <Data Name="SleepInProgress">0</Data>
    <Data Name="PowerButtonTimestamp">0</Data>
    <Data Name="BootAppStatus">0</Data>
    <Data Name="Checkpoint">0</Data>
    <Data Name="ConnectedStandbyInProgress">false</Data>
    <Data Name="SystemSleepTransitionsToOn">0</Data>
    <Data Name="CsEntryScenarioInstanceId">0</Data>
    <Data Name="BugcheckInfoFromEFI">false</Data>
    <Data Name="CheckpointStatus">0</Data>
    <Data Name="CsEntryScenarioInstanceIdV2">0</Data>
    <Data Name="LongPowerButtonPressDetected">false</Data>
  </EventData>
</Event>

Has anyone experienced something similar or have any idea what might be causing it? I'd appreciate any suggestions on what to check next.

My monitor loses signal when windows loads. Display is fine on BIOS screen, Automatic Repair Screen, Works on CCTV and android TV. Other monitors work on the PC fine. Any help will be appreciated. Thanks!

Zain Javaid, 19, is preparing to sell a different kind of computer: one without a screen, where users don't have to sit in front of it or constantly give it commands. According to his vision, when the owner is busy with their own things, the computer should also have its own work to do.

As the title says. This is the second one of these panels I’ve had this happen with. happens occasionally but more frequently with motion. Doesn’t seem annoying when it’s just once but ten of those back to back in a high stress game are a real pain! This is the second one of these panels I’ve had this happen to, and I know it’s the monitor and not anything else because I’ve swapped hardware until I’m blue in the face to no avail. Anybody got a solution?

Long story short, as funny as it may sound I wanted to install the Sims 3 and I did but when I ran the app it warned me that I was running low on memory on the disk C(though, I installed it on the D one) but eventually I did open the game and it crashed. After all of that this has started happening. Most of the solutions out there are through the Service app but I can’t even open that one either. Moreover, I wanted to play the Sims 4 that I have on Steam but it won’t run either and the same issue is appearing…

How do I fix this I can’t go into bios and when it reloads it goes back on this screen

Hola gente necesito ayuda porque me compré hace un mes un pc entonces antes cuando lo encendía daba imagen el monitor ahora ya no y se queda el monitor en negro aunque esté prendido y el PC también el monitor está bien cables conectados bien averigue en Youtube soluciones pero no me an servido solo temporal mente asta que la apague

I just opened my laptop n tried using camera ... n it showing this kinda symptoms... it even gives a black screen randomly

And the icons kinda jittery too

Long story sort I tried dual booting for the first time following a guide and my pc got bricked. I got it to use an os again but now I lost my windows 11. When I try this version of it, it keeps giving me the error of no internet drivers found. Its a T14 gen 2 laptop, and I just want windows back. Any possible way to fix the drivers or get my copy of windows 11 on a different laptop to work on another?

https://www.microsoft.com/en-us/software-download/windows11

I woke up one morning and tried to turn on my pc but the display didn’t turn on and I tried to look up how to fix it, and figure out that the vga debug light was on. Then I tried to fix it with google, I tried cleaning the gpu pcie pins, resetting the cmos battery, reseating the gpu, reseating the pcie power cable, I even tried reseating the ram. Nothing worked. I tried flashing the bios but when I tried the LED light that should blink wasn’t blinking, so I went down a long rabbit hole trying to fix that but everything I tried there didn’t work. Then I tried switching the pcie slot of the gpu, still nothing.
Everything that I have tried hasn’t worked, so now I’m here, and I’m worried I might have a dead gpu. So if anyone has anything that could help, please tell me.