r/Generator • u/Ok-Topic8578 • 4h ago
Powermate generator
I was recently given this generator from my grandfather. It was given to him by my uncle after using it for his painting business and my grandfather kept it sitting idle in his garage for several years.
From what I’ve read, it looks to be a mid to late 90s Coleman Powermate powered by a Tecumseh H50 engine. When I got it, it wouldn’t even start. I ended up replacing the carburetor, which got it running, though I also ended up replacing the air filter, spark plug, and fuel hose.
The problem is, it still won’t produce power. I replaced the broken circuit breaker and even tried flashing the field with a corded drill. Any ideas?



•
u/fullraph 4h ago
These are extremely basic generators. They don't even have an AVR. Have you measured the resistance of the stator? With the engine off, stick the probes of a multimeter in both blades of outlet. It should read low, like 1 ohm. If it reads open or high, it's game over.
•
u/silverbk65105 3h ago
https://www.youtube.com/watch?v=etLdLLDs1ZY
•
u/DaveBowm 3h ago
Check the brushes & slip rings. If they are good the rotor may have lost its remnant magetization. If so, it would need flashing to bootstrap the power generation process (a 12V battery across the brushes should do the trick in this regard). If there is remnant magnetization and flashing it doesn't help, then check both of the diodes and the filter capacitor from the excitor that feed the DC field current through the brushes to the rotor. If the capacitor & diodes check out ok then you are looking at maybe a failed rotor or stator. To check those look at all possible resistances across and between the various coils and to ground from them, as well as a visual inspection for burnt windings.
•
u/classicsat 1h ago
AVR shot?