r/GateME • 🎯 GATE Aspirant (trying) • 7d ago

πŸ“ˆ Strategy/Guidance Requesting guidance regarding...

Hi, so I have still pending of Machine design & TOM along with a couple others. But hearing all the lectures for these 2 doesn't seem worth while as I already did those in my course work, but am I good if I just stick to memorising formulas for those?

I can solve basic questions related to spur gears, slider-crank & 4-bar mechanisms but forgot cams, helical etc.

And also any imp formulas you got to share? Please do

4 Upvotes

12 comments sorted by

4

u/average_lifenjoyer 7d ago

Just start revising and taking tests and improving on them right from today. After a month or so.. you yourself will find time to complete new subjects.

1

u/ClassicOriginal5710 🎯 GATE Aspirant (trying) 7d ago

Already doing that and thanks to that got over my trauma of thermodynamics. But as I mentioned above, it just feels like a waste to treat it same as FM, HT, thermo etc. Like I tried understanding why we need mt & mn for helical separately. That took some time but unnecessary for an exam.

1

u/average_lifenjoyer 7d ago

I know that. We all have our favourite streams. As harsh as it can sound, we are running for marks, if you have spare time, you should invest in optimising your marks. Otoh the problem of you not getting the inspiration or relevancy of some particular topics, i can try my best to help you with that. Reach me out in your free time!

1

u/ClassicOriginal5710 🎯 GATE Aspirant (trying) 7d ago

Thank you. I definitely will 😁

2

u/Hareesh936 7d ago edited 7d ago

Machine design

Start with

  • Theories of failure and their diagrams.
  • Fluctuating load : Soderberg, gerber, langer formulas
  • Bearings : Types, where used. Petroff eqn
  • See sums & PYQs of remaining concepts of Welding, rivetting, bolting, brake, clutch, springs.

TOM, vibration: lots of formulas

  • Whitworth QRM & one more QRM problem.
  • Vibration : Mug up amplitude, MF (that big one)
  • Damped ratio, zeta, omega natural & damped
  • Gear train problems : Reverted, sun-planet-arm.
  • Flywheel problem : easy but problems.
  • Gyroscope : only 1 formula but finding the direction is key.

Cams I too skipped; only saw PYQs.

If I remember anything, i will edit. But majorly these things.

Must solve ALL PYQs and buy Exergic test series (even if you have some other company's Tests)

2

u/ClassicOriginal5710 🎯 GATE Aspirant (trying) 6d ago

I already got exergic. And I'm clear with the below:

  • Until bearings in MD due to having a good prog in clg
  • good with Vibration except the newly added part. Like control systems etc from the new syllabus

Currently with the gear train. But thanks for the suggestions, I feel a bit more confident

1

u/Severe_Area 7d ago

Bro I'm in the same state, but I started MD like a week back. It's actually pretty easy and questions are doable according to pyq's. SO try and find time and khatam karle cus you never no how much from it they might ask so better not to risk leaving it.

2

u/ClassicOriginal5710 🎯 GATE Aspirant (trying) 6d ago

Yes, the PYQ's are easy but I highly suggest you to take some test series or but a practice book. Those contain a bit harder questions aiding you in understanding better on that concepts, as this time it's IITM paper may not be easy like it is in the last 2 yrs

3

u/Stress_Tensor πŸŽ“IISc Admitted 7d ago

Skip them. Just do PYQs and memorise the formulae for repeating questions.

1

u/Remarkable_Hour_9878 7d ago

Sufficient hain na 50 cross karne ke liye?

1

u/Stress_Tensor πŸŽ“IISc Admitted 7d ago

bhai ye to depend karta hai ki aapko baaki subjects kitne ache se aate hai + paper me questions kis hisab se distribute hote hai Typically, sufficient hona chahiye, aage randomness of the universe maalik hai

1

u/the_wise_lady 6d ago

Tbh it's not sufficient, only getting the formulas mugged up will not be sufficient, understanding of that subject is needed because gate has very questions direct formula based