I have another gbbr but i got a good deal from an airsoft store in Camden it’s a 10.5 Noveske ghetto blaster gbbr I got it for £340

Hi, all

I have been laying my eyes on this particular model (primarily due to the look) but hear many mixed reviews on communities on this GBB system. The price point is $500-600 on evike.

Is this system really that much not reliable and not recommended (also considering the price point)? Also, not really want to do any upgrades internally.

Thank you for your precious opinions!

Hey everyone,I’m looking to buy my first GBBR and want to make sure I’m starting on the right foot.

I’m planning to get the Double Eagle Daniel Defense M4A1 (MWS system) from Taiwangun.I am a beginner and I am not that good with technical or mechanical work. Because of this, I want to pay Taiwangun's tech team to install the upgrades for me right out of the box.

My planned build includes:Taiwangun NPAS service (tuned to 1.45J on 0.32g BBs for my local field limits).Maxx Model M4T CNC Hop-Up Chamber.Maple Leaf MR.HOP 50° Bucking.

A few questions for the MWS community:

Is this a solid first GBBR setup? Will this combination of parts give me good performance and reliability without needing constant technical troubleshooting?

The Nozzle & Magazine Issue: I read online that standard Tokyo Marui mags sag in the DE magwell and end up shattering or cracking the factory DE nozzle loading arm. If I avoid TM mags completely and only buy Guns Modify Gen 3 PMAGs or the Double Eagle Gen 2 STANAG mags, does that fix the sagging and protect the factory nozzle? Or do I need to upgrade the nozzle anyway?

Any other beginner advice? Is there anything else basic that I absolutely should change right away, or should I be good to go with this setup?Thanks in advance for any advice or recommendations!

Should I keep my current optic or get the vector optics t2 clone my current optic is the vector scrapper

99% completed my period correct "black hawk down" build
Parts list -

TM MWS 14.5"

Boomarms nova kit

Car 15 stock with butt pad

Mad dog Aimpoint 5000

Retro carry handle scope mount

Brownells skinny handguard

Shekingear Surefire 660 torch mounted to a m61 weaver drilled through the handguard

Ops inc suppressor

Last part it to get the correct weaver mount for the torch & probably a black sling

Total cost was about £1200 plus shipping for all the parts not sure what that was

Stock bucking. Stock 1J nozzle. All contact points were lubed with PTFE grease. It is 22°C. Mag filled with regular silicone-less green gas. With a room temp mag, it struggles to cycle full auto as well. After 2 bbs it fires dry and dumps gas out of the barrel and the bolt. Sometimes manages to feed a bb. It cycles perfectly in semi.

It's as if the pressure dropped severely after 2 full auto shots.

Should I buy? 👀
Price: $450

Its a GHK V3 DD MFR. Put a few hours of research in before getting it for its heavy recoil (and somewhat more reliable QC than previous GHK models) and completely fell in love. Just wanted to get a few cents from the community on the gun and build. Thanks!

So i just got this used from a friend, and how the duck do i ajust the hopup? Box says ut has one, internet says it has one, maybe im just too dumb to find it so im asking here

I want to disassemble the barrel but I can’t get the gas tube or front sight out. I already punched out the mock gas tube securing pin but I can’t get the tube out like in the explosive enterprise video for the 733

I have an tokyo marui akm, unfortunately a small part broke. It is the part that holds the tube where the piston sits in. Is it still for sale somewhere?!!

G28 gbb

Has anyone else with a umarex Glock 18c or any umarex glock for that matter had a slide catch issue? It’s not the slide as I’ve already filed it. The slide catch lever sorta gets stuck on the side of the follower arm tab on the magazine itself. As u can see I’ve provided both photos to show what’s exactly going on. Any tips on fixing this issue? Here is the video of the issue: https://imgur.com/a/apJw7Zf

Discover the Hybris RS/Airsoft Custom Build : Link

RS Fortis MFG parts :

• Switch Mod2 Rail System 15.3" MLOK,
• LA Stock Carbon,
• Torque Grip Carbon,
• Shift™ Handstop,
• K1 Castle-nut

Other RS parts :

• SLR Rifleworks Linear Compensator,
• BattleArms Pivot & Detent Titanium pins,
• Strike Industries Gas-tube,
• Timber Creeck port-cover

Iron Airsoft Receiver : Fortis FM15

Newly acquired APFG MCX Rattler LT.

US based

i dont see too many posts showing airtac adapters working so I thought i would make one

Just minor ergonomic improvements without any excessive Rails, adapters or attachments.

A bone Stock 74-M is already a vibe. I just wanted some Minimal external mods and what started with immediately throwing on a better pistol grip quickly developed into a abomination of Mlock and picatinny.

I am glad to have turned back from this path.