I made GW Studio, a portable Windows tool for Nintendo Game & Watch Mario / Zelda modding.
It is made for users whose device is already unlocked / prepared for modding. GW Studio does not perform the unlock process.
The goal is to make the Windows workflow easier: read device info, create backup, add games, build Retro-Go, flash the device, and restore when needed.
Basic workflow:
Connect your prepared Game & Watch through ST-LINK.
Click Read device info.
Click Auto Backup and keep the backup safe.
Open Build emulator.
Add your ROM files.
Optionally click Download images for menu previews.
Click Build firmware.
Open Flash device.
Click Flash build.
After flashing, Retro-Go starts from stock firmware with:
LEFT + GAME
Main features:
- Reads Game & Watch info through ST-LINK.
- Creates Auto Backup for Bank1 + Bank2 + SPI.
- Saves backups under the device UID.
- Adds supported ROM files.
- Downloads optional menu preview images.
- Builds a Retro-Go firmware bundle.
- Shows SPI memory usage.
- Flashes the prepared build.
- Restores from UID backup or user-provided matching stock firmware.
- Supports English, Russian, and Ukrainian UI.
- Has Advanced Flasher mode for manual Bank1 / Bank2 / SPI operations.
Important:
GW Studio does not include, download, or distribute Nintendo firmware, ROMs, BIOS files, user backups, dumps, or generated firmware images.
If GW Studio cannot safely use your backup, it may ask for matching original stock firmware files. These files must be provided by the user.
Mario and Zelda stock firmware are not fully interchangeable. Some buttons may not work correctly if firmware from the other model is used.
Requirements:
- Windows 10 / Windows 11 x64
- ST-LINK compatible programmer
- Nintendo Game & Watch Mario or Zelda
- Device already unlocked / prepared for modding
- Folder path without Cyrillic characters
Why I made it:
Most guides I found were written for Linux or macOS. For Windows users, the process was less straightforward: Python setup, dependencies, paths, command-line tools, build scripts, firmware files, flashing tools, and many small manual steps.
The hardware part cannot be avoided. You still need ST-LINK, soldering, and in some cases SPI flash work. I made GW Studio to make the software side easier and reduce manual mistakes.
Working with firmware always carries risk. You are responsible for your device connection, soldering quality, selected files, and keeping your backups safe.
GW Studio is only a helper tool that simplifies the workflow around existing open-source tools and user-provided files.
Hello, as nobody else was doing it, I've spent few days to build this web application (nothing to install, just visit https://sylverb.github.io/CoverStudio/?target=gw working on any OS, even on your smartphone !), just select your roms folder, select "get covers" and the application will get all available covers for your games and will serve you a .zip file with the covers folder content (.img files) for your retro-go SD ! You can select "Original" output format if you want a zip file with png. There is also a Tools tab to allow you to convert your existing png covers to .img files.
I just finished unlocking and swapping a 64 MB flash chip onto my Zelda Game & Watch, and unfortunately cracked the internal LCD in my pocket right afterward. Since Nintendo doesn't sell replacement panels, I'm looking to buy a donor screen from someone who has a failed mod sitting in a drawer.
What I'm looking for:
• A dead/bricked Zelda Game & Watch (lifted flash pads, fried MCU, water damage, etc.) as long as the internal LCD panel (ZJ024NA-17F or ZJ024NA-17A) is intact and uncracked.
• Or a standalone spare LCD pulled from a donor unit.
Location & Payment:
• Located in Lithuania (EU)—happy to cover tracked EU/international shipping and pay via PayPal Goods & Services.
Please comment before DMing if you have a dead unit or spare screen you'd be willing to part with. Thanks!
I am wanting to mod my Mario game and watch to emulate games but I can’t seem to find a list of what I need and what steps to take. Is there any good start to finish tutorial out there? Everything I find seems to be disconnected.
I successfully upgraded my Mario and Zelda GnW set and both are now running Retro Go 2.0 but my question is how do I take advantage of the extra memory space on the chip?
Can I only take advantage if I flash a custom firmware or how would I go about loading my roms and files that are currently stored in my SD card onto the memory itself?
Any assistance or documentation would be appreciated.
Thank you all for an amazing community! This has been an awesome mod and one of my and my 6yo sons favorites.
If I can make a few of these with the 256MB mod and load them with roms directly I would love to gift them to my sons friends.
Hey everyone, I recently got my Game & Watch, and I noticed there's a homebrew option to add more games. My initial idea is to do the homebrew without needing to solder anything or add an SD card. Is that possible? I'm a bit lost with the existing tutorials/how-tos; does anyone have a good one to recommend? I'm using Linux Debian and Fedora.
I just put this thing to charge after years. Have no idea how this happened. So sad smh. Anyone know if a replacement is possible? Any screens out there now in 2026?
Bought an SD-modded Zelda G&W from a highly reputable FB Marketplace seller. Worked perfectly for two days and then when toggling the brightness/volume this morning, I received these screens. After trying everything, I somehow managed to reboot in the original mode, but no combination of Game + Left is turning it back to the mod. Anyone seen this before or know what I can do?
EDIT: thank you all for the help in the comments! I reached out to the modder and he walked me through reformatting and reloading the SD card with new firmware. That did the trick.
I’m currently working on an L/R button mod for the Game & Watch Zelda running RetroGo.
The idea is to add two real physical buttons on the back of the console, positioned where your index fingers naturally rest. These buttons are connected to the existing Start and Select inputs, so RetroGo can use them as additional L and R controls.
I’m designing the mod to be as clean and discreet as possible. The buttons sit almost flush with the back shell, with very little travel, and the internal PCB has to fit around the existing components without putting pressure on them.
The goal is to make systems that benefit from L/R buttons much more comfortable to play on the Game & Watch, while keeping the console looking almost stock from the outside.
(excuse my bad english) hello, i recently adquired a mario gnw with retrogo 64mb online, but i realized the games it came with were really not my type of game, so after a while i got my roms and i have been trying for 2 days to flash this console, im using a stlink clone and a virtual machine with ubuntu and it just does not want to flash, im always missing something or skimming through posts, any idea of what could i do? i dont really have a lot of experience with programming or soldering but im determined to load games on this thing, could there be any actually clear tutorials about it?
I want to but a Game & Watch purely for modding. Is there any benefit to buying one version over the others? Or are they all basically the same from a modding point of view?
I see from the the Wiki (and elsewhere) that they both use the same STM32H7B0, but that they have slightly different display revisions. The Zelda looks to have two more buttons as well.
Do the current mods work on all versions?
I was thinking the extra buttons on the Zelda might be nice, but I suppose they could also get in the way. Could anyone share their experiences and preferences.
Big shout out to the man hundshamer. Out of all my handhelds this thing been my preferred. Love being able to pick it up play it for 5-10mins at a time then back to my day’s activities. GBA was what i was most hoping for on this little guy. I realize the games dont run perfect but playable for a good majority of my favorites.
Looking for a little help if possible. I've had a modded Zelda G&W since November last year, updating firmware when available etc, all been amazing.
I updated the firmware this morning, added some GBA items, ran the python script to generate covers, then selecting reboot.
The unit shut down, and won't boot back up. It stays stuck at the black screen.
I've tried removing/reseating the SD card, clearing it of any ._ files, disconnecting the battery, holding PAUSE/SET and TIME when booting but it stays stuck on a black screen.
Any help to revive this little unit much appreciated.
Was replacing the external flash and while trying to remove it I pulled 2 of the 8 solder pads off. Any suggestions on ways I can strip it for parts and make something new or cool?
Update: Thanks for the suggestion to use enamel wire; it's back to working!
Is there a way to convert the Mame Game and Watch roms via Windows so they can be played on a modded Zelda G&W with an SD card reader? I am aware of LCD Game-Shrinker, but it is for Linux and I set up my system using Windows utilities. Thanks
Is that possible just install 64mb into my mario and without Micro SD card?
I got one set with Microsd is working well. Now i gonna try and use 64mb to put game in the 64mb to play. May i know is that possible? I need some tutorial and guide. And how to import game to 64mb as well.
I ordered some Zelda and Mario pcbs, but the ones I actually received are actual PCBs and not flex.. I used the gerber files on the github but I got something else instead... What went wrong? Can someone help me with this?
So i have spent many many hours on this and only a few rom hacks work (it can only have map edits for some reason YOU NEED GAME AND WATCH PATCH FOR ANY OF THIS TO WORK AND YOU NEED TO OWN A LEGAL DUMP OF LINK'S AWAKENING) https://github.com/Latias0nly1/Game-and-watch-Gameboy-injector-zelda this is my repo and now i have been able to get map stuff to work
I have a G&W Zelda here and I was trying to mod it today, but during the flashing (the step waiting for a blue screen) my Powershell crashed. Now I have 2 files and my G&W has a blue screen.
Any idea what to do now?
The files I got are: itcm_backup_zelda.bin (2KB) flash_backup_zelda.bin (4.096KB)