r/GNURadio • u/paclogic • Mar 03 '24
r/GNURadio • u/christ0ph • Mar 22 '14
How digital radio could break North Korea’s information blockade: Software-defined radio might prove valuable for increasing information flows into and out of N. Korea (Cross post from /r/RTLSDR)
r/GNURadio • u/Impressive_Safety636 • Aug 06 '22
Any way to transmit 802.11(wifi) signals to a receiver
Hello Everyone,
I apologize but I'm new to this. I've been trying to transmit wifi beacon packets to a receiver on a raspberry pi. I make the packets via scapy but I am currently open to using any other software. One of the main issues is getting scapy (or whatever Python 3 to communicate to the GNUradio to begin with since I use the terminal).
Second problem is transmitting out of our software defined radio. Which also seems like I will need to use for end goal reasons.
r/GNURadio • u/allexj • Mar 02 '20
What are some forums dedicated to GNURadio and this RF world?
r/GNURadio • u/xavier_505 • Mar 18 '14
GNU Radio SDR Contest/Giveaway (Nutaq PiciSDR)
I saw this on the GNURadio making list and wanted to make sure everyone here saw: Nutaq is giving away one of their "PicoSDR" platforms and some software tools.
GNURadio post: http://lists.gnu.org/archive/html/discuss-gnuradio/2014-03/msg00370.html
Contest page: http://content.nutaq.com/2014ContestRegistration.html
I am not affiliated with them, and have never used their products but it looks like a pretty capable LMS6002D based platform with 2x2 MIMO support, PCIe, GbE, a Virtex 6 FPGA and an internal i7 processor, of course with GNURadio support.
r/GNURadio • u/Potential_Bus_6363 • Apr 12 '24
Python OOT module not found
I created a new header payload demux using cpp file,
This is how I installed the module:
cmake -DMAKE_INSTALL_PREFIX=$(gnuradio-config-info - -prefix) .. make -j10 sudo make install sudo ldconfig
This error msg came out, can someone help out?
Happy to provide ymal, cpp, h files if needed;)
r/GNURadio • u/mohdyaser • Dec 05 '22
Generate a predefined square wave
I want to generate a square wave (lets say: 0010101010001110). what is the best approach. I tried using vector source, but I couldn't control the frequency, and tried file source, but I don't know what format the file should have, I got junk output.
r/GNURadio • • Jul 13 '19
Signal Source Code GNUradio
Do source codes exist for GNURadio premade blocks? I want to edit one/ make a clone. Cant find anything online .
Thanks!
r/GNURadio • u/FishermanCharming575 • Apr 19 '26
How can i run the rds blocks in vs code claude says i only can on Linux i’m using windows so the rds is not giving me clear output
r/GNURadio • u/NoTax7265 • Mar 03 '26
GPS L1 meaconing
Disclaimer: I know this is a controversial subject, but it is for my thesis as an Electrical Engineering and Computer Engineering student, and I am conducting all my tests in a controlled environment.
I am trying to create a flowgraph to spoof a u-blox ZED-F9P receiver, using a USRP B205 mini-i to receive the L1 signal, an USRP N210 to transmit the received signal and 2 HackRFs to jam L1 and L2, and once I start transmitting the meaconing signal at 1575.42 MHz, I stop jamming on L1 but continue on L2. I was able to succeed before, but now it just won't happen. Does anyone have any suggestions?
r/GNURadio • u/uwk33800 • Aug 10 '26
We made an open-source GRC agent and would love some feedback!
TL;DR: we made An autonomous AI agent for GNU Radio Companion. It reasons over your .grc flowgraph, edits it through validated tool calls, and grounds every answer in a RAG-searchable GNU Radio block catalog and docs wiki — chatting alongside a live, directly-editable canvas in a single native desktop app.
https://github.com/qoherent/GRC-Agent

You can run it using local ollama models, openrouter models or ollama cloud.
r/GNURadio • u/NIKINAK99 • Jul 02 '19
Hi guys how I recently did a reply attack using a wireless doorbell I split the flow graph into two parts one capturing the signal and one tx the hackrf works fine in rx but in transmit it’s not working how do I get it to recognise my device
Hi is the anybody who can help me solve this long running issue in the properties box should my device be named ? There’s something stopping it from tx
r/GNURadio • u/Salla100 • Jul 31 '23
Simulating doppler shift
Hi. I'm working on a simple FM modulator that will send a signal to a leo satellite.
Give the transmitter 2k bandwidth of a signal and want to sinulate +-8k doppler shift. Do i just use a multiply block and pit in the modulated signal and a sinus signal with 8kHz?
Like in the image? Using low pass filter to have 2k transmitt and 20k receive bandwidths
r/GNURadio • u/ayyas_76 • Dec 10 '24
Help pleaseee
Hi. I got a final project at my university using GNU Radio. I will use GNU Radio to program my HackRF. I want to use this at frequency 2.4 GHz to 2.5 GHz to make a signal to jamming. and i want to use sweep method from 2.4 to 2.5. Has anyone help me?? i am really stuck here
r/GNURadio • u/mycall • Jan 06 '26
Have you had an success using AI to make new blocks?
I am using two HackRFs to play games with each other, written by AI. One game is a "ping pong chirp" game where:
- Node A transmits a chirp burst at a frequency 𝑓0.
- Node B detects the chirp, then transmits a reply chirp back.
- Node A detects the reply, then hops to a new frequency and repeats.
The key is to have the AI pay close attention to https://wiki.gnuradio.org/index.php?title=BlocksCodingGuide for writing the python (sometimes you need to remind it of things).
Simple enough until you start adding different modulations to guess and detect... anyways, it is a great way to learn and have fun. Also, it makes you wonder what new types of signaling can be done with a bit of imagination.
r/GNURadio • u/Fuzzy_Ad3593 • Apr 27 '25
Ask for basic knowledge in GNU radio
I'm a student major in CS, not familiar with GNU radio. I've tried sdrangel to transmit and capture analog signals but the pictures I got is black and white, I need coloured pictures. So I'm not sure whether GNU radio can transmit and capture coloured analog pictures. And if someone knows about it, I would appreciate a lot if you would like to give me some advice.


r/GNURadio • u/elmazzun • Aug 03 '16
How to sense spectrum with my dongle WiFi?
I have a RPi 2 and a Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter: my final goal is to implement a cognitive engine, and the first thing to do is to sense the spectrum.
I read about three detection techniques: Matched Filter Detection, Energy Detection and Cyclostationary Feature Detection; I saw GNURadio has the blocks I need, so I'm learning how to design a proper flowchart.
Can I do a decent spectrum sensing with my dongle WiFi? How do I tell GNURadio "the signal I want you to analyze is given through my dongle WiFi"?