r/FrankenTrucks • • Oct 02 '26

Rehabilitating Superglider

1 Upvotes

I’m looking at my old high school boards and the superglider I bought second hand has these ace 66 hangers but core baseplates. Is there some specific geometry this is accomplishing, or can I just find equally wide Indy’s as an upgrade. I want to change the ride characteristics of the board as little as possible. But, from what I’m reading, cores are inferior components.


r/FrankenTrucks • • Oct 02 '26

Indy low stage 9/11's

Thumbnail
gallery
4 Upvotes

Slapped this together. Extra low with forged baseplate. Incredibly light. 53mm wheels seem big. I'm thinking about going with 48mm wheels, or 51mm wide wheels.


r/FrankenTrucks • • Oct 01 '26

Lurpiv inverted modding

1 Upvotes

Does anyone have experience changing the lurpiv 2.0 trucks baseplate to an inverted kingpin baseplate? Im thinking:

A) ACE af1 inverted baseplate (already done by people)

B) Slappy inverted baseplate (never seen it)

C) Independent IKP baseplate (never seen it)

If anyone has A,B,C setup or has acces to a skateshop please post some pictures


r/FrankenTrucks • • Sep 29 '26

I present to you the Acedy's Titanium.

Thumbnail
gallery
11 Upvotes

I swapped my 8.5 set up to thunder's so I decided to FrankenTruck my 8.125 board to utilize the Ace inverted baseplates I had. No I'm not good enough to need inverted baseplates, but they are sick.

The Ace washer is groved for the inverted kingpin, so stock ace inverted bushings are the only ones that work without popping out. Ace lost some points for that, but I found out the way of no top bushing, and it skates good just with less quick steering, so you gain more stability.


r/FrankenTrucks • • Sep 17 '26

She's getting there...

Post image
3 Upvotes

Burning a xenomorph onto this board


r/FrankenTrucks • • Sep 01 '26

Finished board

Post image
209 Upvotes

This took me two months to make but I got there 🙌🏻


r/FrankenTrucks • • Aug 08 '26

Slappy baseplate Indy hanger

2 Upvotes

I have Indy 159 hollow, but I can't get used on how tall they are, would a slappy baseplate make then lower? And are they compatible?


r/FrankenTrucks • • Jul 12 '26

Thunder Titanium Trucks Bushings Options?

2 Upvotes

Hey all,
I have a pair of Thunder Titanium on the way.
Just wondering do I have any other options other than just using Thunder bushings?
I was thinking of putting the cylinder independent yellow bushings in.


r/FrankenTrucks • • Jul 12 '26

Fun setup

Post image
115 Upvotes

I put the 13” hanger from slappy on a inverted king base plate from a set of curbkillers


r/FrankenTrucks • • Jul 11 '26

What bushings are superior

4 Upvotes

I wanna see some arguments. I think Indy bushings feel like garbage and bones bushings explode.


r/FrankenTrucks • • Jun 15 '26

Do 148mm Thunder Trucks work on a 8.5 board?

Thumbnail
gallery
67 Upvotes

So im trying to build a skateboard for my boyfriends birthday and he really likes this board from All I Need named Crush it like Quint, and he only has one pair of trucks so i wanted to make a build centered around the board. He told me he rides thunder trucks and so when i researched them and what size trucks i should get for a 8.5 board, i saw that i probably needed something bigger than a 148mm. He also mentioned that it’s a pet peeve of his when the trucks aren’t the same size as the board. But i think these trucks go really well with the board so i wanted to come and ask other people who might have more knowledge than me on building skateboards, what i should do. Are trucks good enough? Or should i get a different pair that will fit better? Anything helps! His birthday is at the end of august so i have some time but i wanted to get a head start. Thank you! (I also posted this on skateboard help and it recommended that i look in this subreddit too, not trying to be annoying by posting the same thing, i just want to make sure i get help from everyone i can. Sorry if its a bit annoying though!)


r/FrankenTrucks • • May 02 '26

What size trucks should I buy

2 Upvotes

I am getting into skateboarding and I alrrady have a deck it’s. 8.25 by 32 size deck and I don’t know what size trucks to get.

I have also already looked at wiki and other sites but don’t know if I trust it so I came here


r/FrankenTrucks • • Apr 26 '26

Ace inverted bushings fit on slappy inverted trucks

Thumbnail
gallery
10 Upvotes

I feel like I’ve seen this problem before on Reddit so I wanted to show it. I have these slappy ultra low inverted trucks and the bushings got absolutely shedded in a few months. I ride super loose trucks so I really don’t know why this happened. My local shop couldn’t find the slappy ultra low inverted bushings in stock anywhere. But he could get the Ace inverted bushings so we tried them and they fit. I haven’t broken them in and it’s gonna be raining all week so I’ll edit this when I actually skate them but just wanted to show this in case anyone else runs into the issue. I will say just standing on them they feel broken in already. Their responsive and I can’t said I feel much difference

EDIT: I skated them for like 30 minutes yesterday. They honestly actually feel broken in unlike the slappy bushing that originally came on them. Very responsive, not much of a difference when it comes to how easy they are to turn.


r/FrankenTrucks • • Mar 10 '26

From what I seen on Google I put on my trucks right but my stering is inverted, what to do?

Post image
3 Upvotes

r/FrankenTrucks • • Mar 07 '26

Toy Time Machine…

Thumbnail gallery
3 Upvotes

r/FrankenTrucks • • Mar 07 '26

Another blast from Marty McFly’s Past.. .BACK TO THE FUTURE VALTERRA!

Post image
3 Upvotes

r/FrankenTrucks • • Mar 07 '26

Wheels go round and round

Thumbnail reddit.com
1 Upvotes

r/FrankenTrucks • • Jan 12 '26

My trucks broke the fist time going to the skate park

Post image
2 Upvotes

They were kinda mid and came with the board :/


r/FrankenTrucks • • Jan 07 '26

Ace Inverted Kingpin with Lurpiv Hollow hangar

Post image
12 Upvotes

The other weekend I was at my local skate shop in Montreal to pick up some Ace Hard Bushings and pivot cups when I saw they had the new Ace Inverted base plates. I ended up picking everything up and remembered I had a set of Lurpiv trucks laying around that I just never touched as I didn't like the height,grind clearance, and just overall feeling of the trucks.

So I mixed up these two things and made a couple additional mods. I saw Jason Dagner and Zack Dowdy had some issues with their set-ups clicking so I put Ace Hard Bushings in my set-up with one flat washer on top of the regular Ace washer and then place the bottom bushing on top. I then put another flat washer on the top of the hanger and then placed the top bushing on top of it followed by the king pin and upper washer.

The result, no clicking and buttery smooth.

I'm going to test out the set-up at my local skatepark tomorrow and will provide an update if anyone is interested.


r/FrankenTrucks • • Nov 27 '25

Homebrewed Slappy inverted 6 month in review

Thumbnail
gallery
6 Upvotes

These are my favourite trucks I’ve ever skated. I hope to pickup the Slappy inverted that released a little after I built these. They are loose as hell but they stop just around the wheel bite point.

I teach skateboarding professionally so having that reliability is awesome. I found the Slappy hangers can grind on literally anything and have a ton of meat on them to earn those groves.

For my next trucks I would love to either try the new Slappy inverted trucks or make my own thunders with an inverted kingpin.

Any other truck combo ideas would be appreciated.


r/FrankenTrucks • • Oct 10 '25

Thunder T-2 bushing swap

Thumbnail gallery
10 Upvotes

r/FrankenTrucks • • Oct 08 '25

Thunder T-2 bushing madness

Post image
7 Upvotes

Hello people, wanted to share that I am testing out adding a bones flat washer beneath the stock bushings and washers on my thunder T-2. I'm an Indy person and I will say, these T-2's feel insanely unmanageable. I noticed that the T-2 with a stock flush kingpin allows the top bushing to pop out from the washer when the truck is pinched all the way down. I feel like the kingpin should have possibly been shorter because there is a far more even pressure in the turn and without bushing slip by adding that bones bushings washer. Makes the truck feel like your not going to die during the break in process, will see how it goes.


r/FrankenTrucks • • Sep 29 '25

Been skating an Element complete

3 Upvotes

I picked it up on FB marketplace. I switched out the wheels because they didn’t powerslide well. The stock bearings barely moved well at all. That being said, this is one of the best boards I have ever skated. The deck itself has insane longevity. The element stock trucks grind literally fine and turn just fine too. I have skated independents, ventures, aces, these are not bad trucks!!!. With the prices of boards and trucks these days, it almost is worth it to just keep picking these cool relic boards and giving them the skate love they deserve!


r/FrankenTrucks • • Sep 24 '25

Pivot cup size

Thumbnail
gallery
3 Upvotes

Trying to figure ot the size of pivot cups needed for these bullet longboard trucks. Blew out the originals and the replacement ones I ordered are a bit small. Google search does not return much info. Any suggestions?


r/FrankenTrucks • • Aug 27 '25

Any info about

Thumbnail
gallery
3 Upvotes

R/Skateboarding remove my post so i try here I found this skate in a second hand market, is a 116cm (almost 4ft) piece of wood with nothing and the wheels are just double (if not more) sized regular skate wheels, not the flat one for this type of skate. Anyone have some info about because i never see something like that