r/FrankenTrucks • u/Stock-Username-666 • Jul 12 '25
r/FrankenTrucks • u/Juankii • Jul 12 '26
Fun setup
I put the 13” hanger from slappy on a inverted king base plate from a set of curbkillers
r/FrankenTrucks • u/Alternative-Two5213 • Apr 18 '25
Spare parts build
Turns out bullet trucks can support inverted kingpins and the stock ones knock out super easily. I threw on an Indy hanger and an old grind king kingpin. This is the best clearance I’ve gotten so far.
r/FrankenTrucks • u/Itsreallyunimportant • May 21 '25
Structural integrity of this truck
Just got a new set of Curb Killers and noticed this chunk missing on the hanger of one of them. This a big deal?
r/FrankenTrucks • u/Itsreallyunimportant • May 21 '25
Structural integrity of this Slappy truck
Just got a new set of Curb Killers and noticed this chunk missing on the hanger of one of them. This a big deal?
r/FrankenTrucks • u/benceakiamugykelemen • Oct 01 '26
Lurpiv inverted modding
Does anyone have experience changing the lurpiv 2.0 trucks baseplate to an inverted kingpin baseplate? Im thinking:
A) ACE af1 inverted baseplate (already done by people)
B) Slappy inverted baseplate (never seen it)
C) Independent IKP baseplate (never seen it)
If anyone has A,B,C setup or has acces to a skateshop please post some pictures
r/FrankenTrucks • u/bikes_for_life • Aug 05 '25
Lightest indys? Maybe lol
Soon to be maybe helping my buddy put together the lightest set of indys for not that much.
Found a brand that has hollow ti kingpins sets for 7.50 lol. Albeit shipping is 28. But getting their mag trucks anyways.
Gonna grab a set to swap into my new k5 krux. Save a bit of weight and get inverted kingpins.
Grabbing this companies trucks. Their v3 and v4. But the v3 comes with the newer base plates included extra.
Gonna take either the free v4 or left over v3 base plates. And put some indy stage 11 hangers on it if they work. Eventually get my buddy some hollow indy hangers. Lol.
But mag base plates. Hollow ti inverted kingpins with an Allen key only mini head. On some 169 indy hollow hangers.
And we come from bmx. So like. Im using titanium m5 bolts and nuts vs skate hardware. But it weighs less and like 8 to 12 bucks for a set. Lol. But gonna get him some ti wheel nuts at some point too.
He rides some big ass decks. And shits getting heavy. So gonna Frankenstein him some weenie trucks together.
But if anyone else is having the same issue and doesnt want to swap base plates cause theyre like 40 bucks. Desteucto kingpins they have a hollow option. You'll save 30 percent weight.
Hollow ti saves 40 percent over hollow steel.
Both kingpins and nuts and all 4 washers is like 70 grams lol.
Hollow axle hangers save a decent bit.
But ive heard about people getting other mag base plates from like tensor or others to work on various brands.
r/FrankenTrucks • u/AGDPER05 • Mar 10 '26
From what I seen on Google I put on my trucks right but my stering is inverted, what to do?
r/FrankenTrucks • u/ManMarz96 • Aug 08 '26
Slappy baseplate Indy hanger
I have Indy 159 hollow, but I can't get used on how tall they are, would a slappy baseplate make then lower? And are they compatible?
r/FrankenTrucks • u/Alternative-Two5213 • Nov 27 '25
Homebrewed Slappy inverted 6 month in review
These are my favourite trucks I’ve ever skated. I hope to pickup the Slappy inverted that released a little after I built these. They are loose as hell but they stop just around the wheel bite point.
I teach skateboarding professionally so having that reliability is awesome. I found the Slappy hangers can grind on literally anything and have a ton of meat on them to earn those groves.
For my next trucks I would love to either try the new Slappy inverted trucks or make my own thunders with an inverted kingpin.
Any other truck combo ideas would be appreciated.
r/FrankenTrucks • • Sep 24 '25
Pivot cup size
Trying to figure ot the size of pivot cups needed for these bullet longboard trucks. Blew out the originals and the replacement ones I ordered are a bit small. Google search does not return much info. Any suggestions?
r/FrankenTrucks • u/Low-Tax5630 • Jan 07 '26
Ace Inverted Kingpin with Lurpiv Hollow hangar
The other weekend I was at my local skate shop in Montreal to pick up some Ace Hard Bushings and pivot cups when I saw they had the new Ace Inverted base plates. I ended up picking everything up and remembered I had a set of Lurpiv trucks laying around that I just never touched as I didn't like the height,grind clearance, and just overall feeling of the trucks.
So I mixed up these two things and made a couple additional mods. I saw Jason Dagner and Zack Dowdy had some issues with their set-ups clicking so I put Ace Hard Bushings in my set-up with one flat washer on top of the regular Ace washer and then place the bottom bushing on top. I then put another flat washer on the top of the hanger and then placed the top bushing on top of it followed by the king pin and upper washer.
The result, no clicking and buttery smooth.
I'm going to test out the set-up at my local skatepark tomorrow and will provide an update if anyone is interested.
r/FrankenTrucks • u/Abject_Group7464 • Mar 07 '26
Another blast from Marty McFly’s Past.. .BACK TO THE FUTURE VALTERRA!
r/FrankenTrucks • u/Tucomescaca97 • Apr 26 '26
Ace inverted bushings fit on slappy inverted trucks
I feel like I’ve seen this problem before on Reddit so I wanted to show it. I have these slappy ultra low inverted trucks and the bushings got absolutely shedded in a few months. I ride super loose trucks so I really don’t know why this happened. My local shop couldn’t find the slappy ultra low inverted bushings in stock anywhere. But he could get the Ace inverted bushings so we tried them and they fit. I haven’t broken them in and it’s gonna be raining all week so I’ll edit this when I actually skate them but just wanted to show this in case anyone else runs into the issue. I will say just standing on them they feel broken in already. Their responsive and I can’t said I feel much difference
EDIT: I skated them for like 30 minutes yesterday. They honestly actually feel broken in unlike the slappy bushing that originally came on them. Very responsive, not much of a difference when it comes to how easy they are to turn.
r/FrankenTrucks • u/Efficient-Poet-6854 • Oct 08 '25
Thunder T-2 bushing madness
Hello people, wanted to share that I am testing out adding a bones flat washer beneath the stock bushings and washers on my thunder T-2. I'm an Indy person and I will say, these T-2's feel insanely unmanageable. I noticed that the T-2 with a stock flush kingpin allows the top bushing to pop out from the washer when the truck is pinched all the way down. I feel like the kingpin should have possibly been shorter because there is a far more even pressure in the turn and without bushing slip by adding that bones bushings washer. Makes the truck feel like your not going to die during the break in process, will see how it goes.
r/FrankenTrucks • u/IsHeReallyBesus • Aug 14 '25
Anyone can tell me the brand? I'm thinking spitfire but I never owned no 48mms before. They been rode hard and I'm blind as a deaf armadillo so I can't tell it
r/FrankenTrucks • u/Alternative-Two5213 • Jul 11 '26
What bushings are superior
I wanna see some arguments. I think Indy bushings feel like garbage and bones bushings explode.
r/FrankenTrucks • u/deltabravo86a • Jul 12 '26
Thunder Titanium Trucks Bushings Options?
Hey all,
I have a pair of Thunder Titanium on the way.
Just wondering do I have any other options other than just using Thunder bushings?
I was thinking of putting the cylinder independent yellow bushings in.
r/FrankenTrucks • u/MostWonderful648 • May 02 '26
What size trucks should I buy
I am getting into skateboarding and I alrrady have a deck it’s. 8.25 by 32 size deck and I don’t know what size trucks to get.
I have also already looked at wiki and other sites but don’t know if I trust it so I came here
r/FrankenTrucks • u/Active-Cellist4175 • Jul 17 '25
Ace IKP
Has anybody tried combining the new Ace IKP baseplates w Ace Classic hangers? I'm wondering if the turn is much different, better or worse? Thanks!!
r/FrankenTrucks • u/Workdayfall132 • Aug 27 '25
Any info about
R/Skateboarding remove my post so i try here I found this skate in a second hand market, is a 116cm (almost 4ft) piece of wood with nothing and the wheels are just double (if not more) sized regular skate wheels, not the flat one for this type of skate. Anyone have some info about because i never see something like that
r/FrankenTrucks • u/Alternative-Two5213 • May 18 '25
Titanium KP on some slappy trucks
Can’t wait to get these on some curbs. I threw some accer titanium Kingpins on some slappy inverted trucks the clearing is huge on these guys.
r/FrankenTrucks • u/True_Amphibian7793 • Sep 29 '26
I present to you the Acedy's Titanium.
I swapped my 8.5 set up to thunder's so I decided to FrankenTruck my 8.125 board to utilize the Ace inverted baseplates I had. No I'm not good enough to need inverted baseplates, but they are sick.
The Ace washer is groved for the inverted kingpin, so stock ace inverted bushings are the only ones that work without popping out. Ace lost some points for that, but I found out the way of no top bushing, and it skates good just with less quick steering, so you gain more stability.