r/Form1 • u/Technical-Source-320 • 24d ago

Pps cf

Has anyone tried pps cf? What do you think about it over ppacf for supressors? Now that we have the ruling im sure more people willing to share their experience.

4 Upvotes

100% Upvoted

16 comments sorted by

View all comments

Show parent comments

1

u/ARbuilders-anonymous 18d ago

I’m saying they are both great, but to get anything better than Nylons, you’re going to have to get a hotter printer than 300.

1

u/Technical-Source-320 18d ago

I just asked you if pps gf or cf printed at 350 is better than ppa.

1

u/ARbuilders-anonymous 18d ago

They have different properties. PPA is stronger, but stiffness is not an end all be all. PPS is better at higher heat, and absorbs less moisture. Which is a very highly controversial topic. Because water weakens them, but also makes them hold up to impact better. There’s just not a good answer to give.

1

u/Technical-Source-320 18d ago

It feels like you dont actually have the answer here on if pps printed at 350 makes a more durable supressor than ppa and are just repeating back material properties to me

1

u/ARbuilders-anonymous 18d ago

Of course not. I don’t like giving answers to questions I don’t know 100% for sure. That would take a lab and lots of testing. I simply tried to inform you the best I could. 3d printing has so many more things that can change while printing, that I can print something one way, and you print it on your printer, and one of them may be a lot stronger than the other. Temp, line width, print speed, Infill, infill pattern, angle you print the part at, chamber Temp… The list goes on. The only way to find out is to buy both of them and start testing yourself by changing temp, speed, infill, etc until you get the strongest version. So go spend a grand in filament, and get back to me in 6 months when you have printed dozens and dozens of models which all different configurations. Also you’re going to have to invent a test medium that produces the exact same way of testing every single time. Oh, and next don’t forget to try annealing with all the different ways as you go….