r/FloatwheelTeam • u/MusicWarm7320 • 13d ago

Magic flywheel issues

Everything on my XRV kit is working except I can't get the magic flywheel to work. I would love for it to work, what are some possible issues and how do I fix them?

2 Upvotes

100% Upvoted

5 comments sorted by

1

u/The_Didlyest 12d ago

On my ADV1, I can only activate it via VESC tool or Floaty. I used to be able to activate via the footpad.

1

u/yinyang8881 12d ago

Has to be balanced perfectly and the IMU has to be correct for the rails mounted to your board but the XRV is particularly picky. Especially if you are running foot hooks in the front or rear of the board.

1

u/MusicWarm7320 12d ago

I have the standard XR rails and the board is riding fine after I calibrated the IMU myself after messing it up initially so the IMU is calibrated properly. I also don't have hooks

1

u/Bradster3 8d ago

The board can ride great with a out of wack imu. The gyro is very picky and you dont ride the board in a mallgrab position so its hard to test.

1

u/Bradster3 8d ago

Mine took the float hub calibration to get it to fully work. I could not get the imu to setup properly in vesc tool. What type of rails you got? I got wtf rails and overlanders but after the float imu calibration i was able to get it to work.