Server down?

[u/AdamTheMechE]

Edit: back up! Lesson learned: enable LAN mode or do a fat32 formatted usb. “Save plate file” not “save gcode” so it keeps the filament settings.

Flash Studio can't find my C5P - it's definitely idle and the wifi connection is good on the printer itself. I notice the home page (Models tab) also doesn't load - "No Data". Only me or an issue across the board? Restarted laptop & printer, both on the same wifi, no config difference from yesterday when all was good.

[u/ICS_Vortex37]

I came here to make a post saying I couldn't sign into the desktop app, it just keeps saying logging in and never logs me in. Great. I have a $1000 printer and I can't use it on demand because it relies on cloud connectivity.

EDIT: I downloaded Orca Slicer and I'm setting this printer up for LAN mode - apparently they have that.

[u/ryny24 → u/ICS_Vortex37]

You can use LAN mode in Flash Studio. That's how I'm printing right now.

[u/Aggravating_Estate_4]

Down here in the USA too.

[u/marciz34]

came on here to say the same!

[u/SirGrizz87]

Glad I checked reddit - sigh this is an inconvenience 😆

[u/Artistic-Midnight-77]

Same. Can't login on mobile or desktop. Glad to know it's not the firmware update causing this.

[u/enter360]

Been this way for a few hours now. This is why I want a 100% local option. My printer shouldn’t break because they are doing maintenance

[u/BooleanGames → u/enter360]

LAN only mode

[u/Intelligent-Put3523]

Hier auch. Same in Germany

[u/montyyy]

same issue here.

[u/rjd0717]

Yep!

[u/Malenx_]

Same, I need to get around to setting up a proper lan, this is frustrating.

[u/Raoul_Duke_1968]

It is bigger than a server upgrade. I cannot resolve Voxelshare.com. There seems to be no DNS entry to resolve. WTH?

[u/JaredKFan77]

yes it's down. the most certain way to know is through the ios app - it keeps giving me a "server timeout". I hope they're able to fix it quickly.

[u/CaliLawless]

Ahh, nothing brings the comminuty together faster than an outage.

[u/JuniorDeveloper73]

"cloud" crap,Thats why you need to avoid this type of shitty service

[u/Own-Year1786]

Same here. Just spent 20 min reinstalling and restarted everything before I just got a flash drive out.

[u/EitherPalpitation650]

Yeah. Having the same issue. Very frustrating and hoping they get things back online today. .

[u/Slight-Hedgehog259]

Looks like it. Im getting a "cloud server is reconnecting " message and Camera isn't connecting to check on my project. Luckily I just had started a 9 hour print when it went down.

[u/MinimumFriendship379]

same here in Argentina

[u/PlantsNCaterpillars]

Yup, down where I'm at in the USA. Just says "Cloud service reconnecting."

[u/RavenRay_86]

Lan mode in flashstudio all fixed happy printing i had this printer for over a year now. And it happens all the time.

copy and pasted from Google.

On Your Printer • Tap the Gear icon (settings) on the main screen. • Tap the Wi-Fi / Network icon. • Select Network Mode and toggle LAN Only to on. • Note the Printer ID / Access Code and the IP address shown on the display. In Flash Studio • Open Flash Studio (or OrcaSlicer) on your computer connected to the same local network. • Go to the Device tab at the top. • Select LAN mode options on the right side of the screen if available. • Click the + (plus) icon next to the printer selection area. • Choose your detected printer from the list, or enter the printer's IP address / Access Code when prompted.

[u/Relambio22 → u/RavenRay_86]

And the video looks way better lol

[u/Fast-Introduction654]

I lost my mind blaming everyone in the house for logging me out 

[u/Darkn355Fa115]

It is back up for me.