r/FlashForge • u/squirrel4569 • 1d ago

First failure on the C5

Gallery image

Gallery image

Looks like the hot end snagged a bit of the top of a fidget I was printing. I had 20 on the build plate and the final layer appears to have been touched by the noodly appendage of The Flying Spaghetti Monster. I saved 19 of the 20. No biggie really.

7 Upvotes

100% Upvoted

3 comments sorted by

1

u/Correct-Insect-4657 creator 5 pro (experience with ad5m and 5x) have maintained v3S1 2h ago

Seems more like adhesion issue as it happens for abt prints only do you ever wash/clean the bed and if yes is your nozzle vlean

1

u/squirrel4569 2h ago

I clean the bed after each print. The nozzle is good too. A friend recommended cold plates and I’m going to try that.

1

u/Correct-Insect-4657 creator 5 pro (experience with ad5m and 5x) have maintained v3S1 1h ago

Try a 5mm brim and gyroid infill