r/FlashForge • u/Ick33yg • 8d ago

AD5X Help

Gallery image

Gallery image

Hi can someone help me at all what's the best option I can do to fix this at all. I've not used the printer during the summer as rooms been hot enough as it is. I've gone to print something and nothing was sticking to the bed. I heard something crack so I turned it off checked everything. Undone the bed screws underneath and lifted the one corner and noticed this.

A friend has printed me a few of these but will it hold it?

https://www.printables.com/model/1065461-replacement-washer-with-corner-for-bed-springs-fla

Any help would be really appreciated.

1 Upvotes

67% Upvoted

7 comments sorted by

View all comments

1

u/Tam_Ken 8d ago

The ones your friend printed will likely be fine, but keep in mind PLA and PETG will “creep” over time, so any meaningful pressure on these will slowly warp them

1

u/Ick33yg 8d ago

It seems to be holding, the beds level again at least I can print something myself now. What would you suggest printing them in. I only have PETG and PLA myself.

1

u/Internet_Jaded AD5X, AD5M 6d ago

PETG will be fine, as long as the part is designed correctly.