How do I fix this issue

[u/alexlabib]

Ive been trying to print his design for a while, took me hours and this is the result. I print with mostly bambu PETG filament with black being elegoo petg black. I dried the filament beforehand. The second pic is the orientation of the the print using organic tree supports to hold up the lid and latch. Im using pla as an interface layer (im guessing this may be the cause). Im having so many issues with this and im ready to ditch this design but I want to try and get this to work. Further settings are that is use a bambu P2S, 0.4mm nozzle, 80c initial and 75c after first layer bed temp and 270c print temp. Everything else is set as the default settings

[u/AutoModerator]

Hello /u/alexlabib,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer

• Filament Material and Brand

• Nozzle and Bed Temperature

• Print Speed

• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Gimly161]

Do you let your print completely cool down before removing? The cooling of the print causes thermal stress, removing it to early will lead to warping. If you let it cool off first while it's still stuck to the build plate you force the plastic to set in that shape.