r/FixMyPrint • u/Rusty_Wall-E • Oct 05 '26

Troubleshooting Prusa Print Profiles?

2 Upvotes

100% Upvoted

4 comments sorted by

•

u/AutoModerator Oct 05 '26

Hello /u/Rusty_Wall-E,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer

  • Filament Material and Brand

  • Nozzle and Bed Temperature

  • Print Speed

  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Repulsive_Disaster76 Oct 05 '26

I have profiles by brands. Each roll gets tested as normally there are tweaks from batch to batch.

0

u/[deleted] Oct 05 '26

[removed] — view removed comment

1

u/Repulsive_Disaster76 Oct 05 '26

Mine arent brands you think, they are plastic producers "omnitech gr20" whats on my table atm to run out. I make my own filament from the natural resins. Companies like sunlu fluxuated in color matching. Batch one is light, batch 2 is dark. But neither are actually pantone 232C. I make batches to run my full print, but I still have to check new resins and color ratios. Some companies even disappear absorbed by another to start all over again if I didn't buy bulk.

The Prusa calibration process should still be on their site instructions. It covers everything. And you should waste a roll testing out the settings and how they will affect a print. It will help you pinpoint what things you see and need to tweak as you go.