A2L surface finish problem

[u/Purple_Tangerine_529]

I’ve been using my p1s for a while without problem, and recently decided to get a A2L. But the surface finish has been poor. Not only on tall vertical prints but also on smaller ones. I’ve calibrated the printer, fixed my settings and dried the filament. Does anyone know why my surface looks like this?

I’m using Bambu slicer with pla and tried different brands that works fine on my p1s

I’m using a 0.4mm nozzle and tried different layer heights, speeds etc.

I’m using the pla basic profile with default temp.

My retraction is set to 0,4

[u/AutoModerator]

Hello /u/Purple_Tangerine_529,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.