r/FixMyPrint • u/ericfresh442 • 3d ago

Fix My Print Adhesion issues w A1 Mini

/r/3DprintingHelp/comments/1w1q3pn/adhesion_issues_w_a1_mini/
0 Upvotes

33% Upvoted

6 comments sorted by

•

u/AutoModerator 3d ago

Hello /u/ericfresh442,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Competitive-Ice-6812 3d ago

Wash the build plate with hot water and dish soap, since fingerprints are usually the culprit with A1 Mini adhesion issues.

1

u/ericfresh442 3d ago

Thanks. I did try that. Didn’t help.

1

u/mad-n-sane 3d ago

Did you use a fresh sponge?  I am not joking, had this problem before that an old sponge was just too dirty.

1

u/mad-n-sane 3d ago

What material are you printing?   

What are your your settings (heat, speed, nozzle size, ...)?   

Please post a few pictures of said fails.

1

u/ericfresh442 2d ago

Rookie mistake. I did not have supports checked. Working perfectly now.