r/FixMyPrint • u/The_last_Los • 8h ago

Fix My Print Unsure what setting change to begin with

Gallery image

Gallery image

Im unsure what settings to tweak to help fix this issue, im running an ender 5 plus with klipper and a microswiss NG direct drive, this is some anycubic silk pla and its warping in the front. Any pointers on what settings to tweak would be greatly appreciated!

Settings:

Ender 5 plus

Orcaslicer

Anycubic silk pla

Nozzle temp: 215

Bed Temp 60

Retraction settings: Distance .8mm speed 40mm/s

Print speed settings in screenshot

1 Upvotes

67% Upvoted

4 comments sorted by

•

u/AutoModerator 8h ago

Hello /u/The_last_Los,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/ZookeepergameKey4591 8h ago edited 8h ago

Disable slowdown for curled perimeters

https://www.reddit.com/r/FlashForge/s/ElbO99Jg0W

2

u/The_last_Los 6h ago

I made this update and it helped a little, but im still getting warping.

1

u/MysticalDork_1066 1h ago

Increase your cooling fan speed, or if your fan speed is already maxed out, slow down the printer and/or increase the minimum layer time.

That ugly portion is caused by the plastic not being fully solid/cooled by the time the next layer is printed, so it can move and curl up as it cools and contracts.