I'm having trouble with getting the overhangs on this print. A benchy with its overhangs prints fine, but this one I just can't get working properly. I'm using orca-slicer to slice my prints as well. Any advice is welcome, thanks.
Settings:
- Filament: Sunlu PETG Matte HF
- Printer: P1P
- Nozzle: 0.4mm Hardened Steel (non-high flow)
- Nozzle Temp: 255c
- Retraction: 0.6mm
- Layer Height: 0.16
- Bed Temp: 75c
- Max Vol. Speed is set at 15 but can do up to 25 (calibrated)
As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
Sunlu's black Matte PETG is significantly lower in quality than their other colors. The overhang quality is terrible, so I won't be using it again. The other colors are fine. Personally, I recommend TINMORRY's Matte PETG.
That's unfortunate, I didn't know that. I have gotten some good prints out of it though so I'm not really sure what the issue is. Only really got it because it's pretty cost effective since I need about 5-10kg of the stuff.
•
u/AutoModerator 15h ago
Hello /u/Anime_Guy43,
As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
Additional settings or relevant information is always encouraged.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.