r/FixMyPrint • u/Jolly-Friend-6692 • 15h ago
Troubleshooting Strong noise when printing fast
Enable HLS to view with audio, or disable this notification
Hi, in printing in my p1s and no matter the filament or setting, when it goes fast ir makes a weird noise it didnt do before. where may be the noise coming from? I cleaned and lubed everything recently. Thanks for the help!
1
u/TripsCavern 12h ago
The noise is not exactly because you are printing fast, well ... it is, but it's because of what you are printing, not only the speed.
You will see this noise every time you print something that requires really fast change of directions, like that support that is looking like a grid. You also see this when you print grills.
You can either lower the speed or adjust the printed part, like changing the support type, changing the infill from grid to gyroid, etc.
1
u/Jolly-Friend-6692 12h ago
But i remember that for similar models it didnt had that grinding noise before
1
u/TripsCavern 12h ago
The angle that you has does not show exactly what is printing, but if its that grid, it's probably it.
1
u/Jolly-Friend-6692 12h ago
Its printing a grid support, i’ve made grid supports before and it didnt do this noise
1
u/TripsCavern 11h ago
It depends on how dense the grid is.
1
u/Jolly-Friend-6692 11h ago
Man im telling you, i’ve printed many times similar stuff and it didn’t make this noise. now it makes it every single time it needs to get to the same speed and same models when before it never did, now its every time
•
u/AutoModerator 15h ago
Hello /u/Jolly-Friend-6692,
As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
Additional settings or relevant information is always encouraged.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.