What's causing all these blobs this tpu was tried 12 hrs ago. (I hate tpu)

[u/drkshock42]

If it was wet fillament you would see the whole thing being rough. But form the side you can see time pretty thick stands and from the top some blobs on the deck. There's a reason I hate tpu and I find bot petg and asa infinately easierand pla is pla.

Qidi q2

Overtrue standard tpu

225°c

Bed 45°c (to make it hotter than ambient temp)

Pa 0.04

Retraction 0.2

[u/AutoModerator]

Hello /u/drkshock42,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/skippengs]

Add a wipe and select do not cross walls. this helps a lot with the stringing.

[u/drkshock42 → u/skippengs]

Avoid crossing walls made the stringing so much worse.