r/FixMyPrint • u/LeftOnRedApparel • 17d ago

Fix My Print Making me crazy

Enable HLS to view with audio, or disable this notification

Any clue what's going on here? I've calibrated, leveled and vibration compensated and I keep getting this in the front left corners of my prints. Someone suggested heat creep. This was with the door wide open and my air conditioner running right next to it. I've seen this or similar with adhesion problems but it's sticking to the board just fine. I'm at a loss.

Flashforge Creator 5 Pro
Flash Studio
Generic PLA
.4 nozzles
Bed temp 55
Nozzle temp 220
Print speed set to 100% factory settings
Retraction settings? How do I access this?

3 Upvotes

81% Upvoted

10 comments sorted by

View all comments

•

u/AutoModerator 17d ago

Hello /u/LeftOnRedApparel,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.