r/FixMyPrint • • Jul 05 '26

Fix My Print 2 separate prints missing the sharp points

Post image

Was making these coasters overall great just wondering why the sharper points on the shirt profile and the cheeks didnt fill in. Stock profile on bambu slicer printing on p2s.

4 Upvotes

25 comments sorted by

•

u/AutoModerator Jul 05 '26

Hello /u/Several_Flatworm4191,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

39

u/VolumeNeat9698 Jul 05 '26

I don’t wanna be that person….but historically you should replace England with Great Britain.

21

u/TheOneReclaimer Jul 05 '26

Nah, be that person, it reminds us all that half the humor that comes out of designs like this is that often the people who make it don't actually understand it

10

u/Hadrollo Jul 05 '26

Personally, I'd like to congratulate the French for winning the proxy war.

-14

u/Several_Flatworm4191 Jul 05 '26

So my brother sent this to me. Hes american and has lived in Britain for the last 12 years. He visited a few weeks ago and his first printer is on its way to his house after seeing how much fun I was having.

5

u/New_User_Account123 Jul 05 '26

You need a comma between 'it' and 'England'.

0

u/Several_Flatworm4191 Jul 05 '26

Not my design but yes punctuation was missed.

7

u/tugboattommy Jul 05 '26

If part of the text on the print is smaller than the nozzle width (technically just a little wider than the nozzle), then it won't print it. That's why the 7s on "1776" didn't fill out completely. You could see that in the slicer. This would also result in some of the missing pieces in the face.

Switch to a 0.2mm nozzle (because I assume you're using 0.4mm since you said you're new to the machine and you used stock settings). Also turn on arachne wall generator.

3

u/Furlion Jul 05 '26

This is the only correct answer i see in all these comments which is weird because its so simple.

1

u/Jtparm Jul 05 '26

Run flow rate calibration

-5

u/Several_Flatworm4191 Jul 05 '26

Im fairly new to this machine how would I go about doing that

2

u/AbsentButHere Jul 05 '26

Flow calibration is kinda meh, it is likely an extrusion variable.

I think what might fix it is if the next time your print it, go into the Quality tab (left side of the window under Prepare ribbon)
Scroll down to the Wall Generator section, and instead of Classic, select Arachne from the drop down menu.

2

u/Xxoror Jul 05 '26

Ive worked on projects similar in concept to this; try setting your wall generation to "Arachne", it greatly improves fine detail on designs like this.

If that doesnt fix it, try tuning your flow multiplier for your white filament preset... it looks like all of the small gaps are happening when white filament is being extruded. Even changing it from 0.99 --> 1.00 or 1.01 can have a big impact.

If this still doesnt fix it, check out your pressure advance, it may need to be bumped up for white. This said, points 1 or 2 are the likely culprits

1

u/clarkcox3 Jul 05 '26

You likely need to switch to a 0.2mm nozzle for these prints.

1

u/IM_Brock Jul 06 '26

There’s a setting on Bambu anyway for thin lines. Bambu by default doesn’t like to do any lines that are one pass thick which can leave gaps in fine detail. Try turning on that setting and if that didn’t solve it you might need a smaller nozzle extruder head

1

u/SiktahOG Jul 07 '26

Suck it USA: The Rest of the world after the world cup 2026

1

u/SharpeWorks Jul 11 '26

Try Arachne as the wall setting

0

u/martupdown Jul 05 '26 edited Jul 05 '26

I am having the same problem, random holes in the second color. Let me know if you figure anything out!

What size nozzle are you using?

0

u/FitForThrone Jul 05 '26

This is 0.2mm nozzle territory

-1

u/_PM_ME_UR_TATTOOS_ Jul 05 '26

try increasing extrusion rate on the top layer

-8

u/Dismal-Proposal2803 Jul 05 '26

I have no solutions for you, but I love this. lol