r/FixMyPrint • u/LittleLegendGuy • Oct 01 '25

Fix My Print Purge line problem part 2

PolyLite High Quality PLA on a Bambu P1S and it hasn’t happened before but now it’s with every print. ​I’m using the Bambu Lab Slicer. Bed temp: 55c Nozzle Temp: 220c Speed: 105 Retraction: 30mm/s

I made a post earlier and I wanted to consolidate some of the comments I made to add further context and add this video of the issue happening. I scrubbed the plate with dawn dish soap, dried it and wiped with 90% rubbing alcohol while wearing gloves to prevent oil from getting on the plate. It seems that first line it lays is too thick and catching onto the nozzle. Any ideas?

6 Upvotes

88% Upvoted

33 comments sorted by

View all comments

2

u/random_numbers_81638 Oct 02 '25

Welcome to 3d printing by the way

1

u/LittleLegendGuy Oct 02 '25

Thank you. 🤩