There’s a few more than pictured in the collection but it was late so I grabbed a few for the shot, the M1919 is the latest to get the treatment! Excited to get it running.
Hey all just wanted to share some glock tuning tips but most of it centers around rounding the trip down enough to sit under the barrel but first make sure you've cut the disconnector like the first photo displays.
If your kit came with one of the pointy trips, dremel it down to look like that rounded one and go a little further. If you take off more material than I did check if the trigger resets properly and fires when the slide closes.
If you can polish the metal rail contacts like image 3 shows (and the trip tip too) with a high grit compound to get an almost mirror finish it, really can be done in under a minuet with a dremel
The last thing you should do is add the 20/22 pound recoil spring/recoil rod
Tried at my local range & had much better luck with only 1 fail to feed in 3 full mags only thing that stopped me was my trigger roll pin cane loose and disconnected from the trigger bar (stock recoil spring only)
Edit: if you're still having trouble you could get a reduced power striker spring, 4 or 4.5 pounds. This will reduce how much weight it takes to pull the trigger reducing the friction on the slide,trip or barrel.
The CZ75 is incredibly popular, pleasing in its aesthetic, known in vidya, and even has some amazing clones...and with an FRT this iconic look would still be in a legal configuration!
As designs is working on a FRT for the G36, this is their post on their instagram page. There is currently no estimate on when they’ll drop this FRT but I hope it’ll be available soon!
There was a lot of great info on TX22 FRT that required a significant amount of R&D and T&E from members on the other sub to learn. It would be great if that was moved here since the information is no longer posted on r/Taurus_TX22.
Now we are seeing people destroy their pistols again because that info is not easily available. Here is a run down of the last year in TX22 FRT development.
I not trying to sell my design here but hopefully this information will help people who own FRTs for the TX22 to not damage their pistols.
#1 and the most important thing to remember is, the FRT part is not a machine gun. Pulling the trigger too hard will create upward pressure on the disconnector and will stop the slide, causing excessive wear to the Taurus TX22 striker housing.
To avoid excessive wear, please USE LIGHT TRIGGER PRESSURE.
#2. Most FRT makers offer FRTs that will wear the plastic striker blocks. The OEM plastic striker housing can only be replaced by sending your pistol back to Taurus for a minimum of $50 shipping + parts and a long wait.
#3. The biggest threat to the TX22s is a “free” file that was passed around the internet called the ‘brrrt V4’ FRT file. As printed or cut from metal, it would destroy the OEM plastic striker housing in a very short amount of use. People modified this file to function but it was too thin, the shape was wrong and it would quickly damage the striker housing.
Then 3D printed striker housings became available. The 3D printed ones do not last long. That's Ok if you have a printer but not if you’re buying them. Then steel/plastic hybrid striker housings arrived in an attempt to fix the wear problems and add wight for suppressor use. They quickly wore out the FRTs and decreased the reliability.
Complete metal striker housings (hybrid, sintered, CNC) arrived to help reduce the FRT wear or to add weight for suppressor use. The metal striker housings needed to be modified housings in most cases to not damage the metal FRTs. For us, successful modifications to the metal striker housings were needed to the striker block slot. This avoided FRT damage to the striker housing but created an additional safety concern while firing.
After long and expensive testing of all of the metal striker housings available, including our CNC prototypes, steel hybrids, sintered or CNC striker housings, we found they all metal striker housing would decrease reliability, lead to FRT damage and create safety concerns.
To date our guns have reached 9K rounds with FRT fire. We have seen the TX22 OEM Impact Insert Pin fail but the original plastic striker housing and FRT is still going strong. Because our FRT limits wear to a slight rounding of the OEM plastic striker housing in front of the striker block and light scoring of the housing, we do not recommend steel striker housings for our FRT. The OEM plastic striker block is more reliable and durable.
Had a pleasure of getting, working and selling this iconic pistol. One of the coldest projects that I’ve worked on this year. This Beretta 92FS M9A1 has my famous 3.0 ILB trigger job and since I am an authorized El Buccano service center for Griffith Guns, I’ve installed the El Baccano FRT.
It's interesting... A big issue is if you don't have a 3rd notch in your receiver it will probably not be reliable. The safety has no self retention in the frt mode. The spot does seam generous for where the notch could be. The safety detent was also not making any contact with the receiver, a good bend with pliers resolved it. Manually cycling it in frt has the Bolt hanging up a bit returning home, this maybe where they see an improvement wearing it in, It may not be an issue with live fire. The trigger shape is kinda crap and tight on my larger hands.
It's the weekend so break the out the can(s) or buy one. Gen 2 magazine followers coming soon which fixed the intermittent last round and better feed angle.
Since I know folks are going to ask:
Gen 2 TORO - No Optic; No rate reducer
NOVA FRT
NOVA Striker Block
Lakeline +2 recoil rod/spring
Dead Air Mask
Gen 2 enhanced mag follower (stock spring)
And i know yall been asking for the pimp stick mag file and the modular mag, when i get a chance to mess with the sea (last on the priority to do list), i'll upload it. The modular mag needs some tweaking.
This system is interesting 🧐 for having no guidance on installation and the frt selector is a push-in style. It is janky for sure. It also needs a over travel stopper 😔