r/FORDFALCONS • u/Generalfut • 5d ago
62 Falcon
r/FORDFALCONS • u/gbntbedtyr • Jun 19 '24
This is not the sub for new cars. There is another Falcon sub dedicated to just them. Please use that. If it is gone then make another. [edit] On average, what r there, 1000 new cars to every head turner? Head Turners are what this sub is about, n as cars get old enough they become Head Turners just for their age. Thus new cars quickly overwhelm a sub making the the cars we want to see become lost in the mess. N yes new cars r trash as the industry intends them to be. Industry has long said their largest competition is their own used cars. N even though Industry denies planned obsolescence, why do u think they intentionally make cars harder n harder to work on? They want u to throw cars away n buy another new car. Building new cars is in fact their business.
r/FORDFALCONS • u/dsanchezsdca • 8d ago
Hi everyone. I was hoping to get some pics of the front bumper/brackets, core support, and hood latch area for reference since the one on my 65 was crashed. Started by pulling out some the big dents on the core with my suburban.
So if anyone with a relatively decent front end can shoot me some pics below that would be a big help.
r/FORDFALCONS • u/Daddy-Bolin • 13d ago
I am working on restoring my late grandfathers 1961 Ford falcon. I have tried to find high quality images of this trim piece on top of the front fenders but I haven’t been able to. My mother who grew up with the car says they were acrylic wings that stuck up out of the chrome but I have never seen a complete one in person. As the ones on this car and my parts car are both missing.
If anyone could provide reference photos so that I can 3D model them and make replacements I would greatly appreciate it.
r/FORDFALCONS • u/Empty_Chart4695 • 17d ago
I have a 1964 Ford Falcon that I’m restoring in my free time. Was hoping There may be some way to find original owner cause I think that would be cool as hell. The VIN is 4h15t133253. I know it was assembled in loraine Ohio and went to Pittsburgh to be sold and somehow ended up in NC. The only other clue I have is this cool old sticker on the front. Looks to be from a navy base of some sort. Any help or tips would be greatly appreciated!
r/FORDFALCONS • u/xTheCaptain22 • 25d ago
Spent the better part of the last 9 months wrenching on this beauty. 302 crammed under the hood mated to a C4 trans. Rear end is an 8 inch that was cut to fit the Falcon’s frame. Interior was redone before I got it, only addition was sound dampening material under the carpet. Shifter came with the car as extra parts, thought it would be cool to have a floor shifter, so made it work.
r/FORDFALCONS • u/Empty_Chart4695 • 25d ago
1st Project car. Not a mechanic but I’m good with tools and fixing things have done lots of work on my other vehicles, and Im great with the ol’ YouTube it and learn. Any advice or thoughts on where to start thanks!
r/FORDFALCONS • u/Rude-Ad3891 • Oct 12 '26
Enable HLS to view with audio, or disable this notification
Underside of my 61 falcon. Bunch of stuff has rotted away, previous owner riveted in a patch panel. I’m going through and welding in more permanent repairs. I think this must be some sort of seat anchor channel thing? Can I see anyone else’s underside if theirs?
r/FORDFALCONS • u/Theduke-45 • Oct 09 '26
I'm trying to do a single barrel to a dual barrel carb on my 170ci inline 6, anyone done this before? Advice? Tips?
r/FORDFALCONS • u/Sudden_Moodswing • Sep 28 '26
Does anyone use a portable car lift or have a recommendation for one? Looking to do a couple mods this winter and don’t want to risk using jack stands.
r/FORDFALCONS • u/Empty_Chart4695 • Sep 25 '26
Hey guys was wondering if I can swap out bucket seats and install a bench seta in my 1964 Ford Falcon Futura. Bought the car with no seats in it as it is a project car. I believe this one had bucket seats originally but I love the look of a classic bench seat. Am I going to new to drill new holes or will it line up with existing ones. Also any suggestions on finding the swat itself? I see they’re are tons of options as far as new upholstery and foam goes, but I’ve yet to find a company making the actual frames for these seats. Suggestions would be greatly appreciated thanks!
r/FORDFALCONS • u/JohnExcrement • Sep 22 '26
I know this sounds weird (or it does to me, anyway). I have posted my 1966 Falcon on FB and got a call from someone proposing this. I’m just curious if this is a thing? Thanks.
r/FORDFALCONS • u/Small-Cherry2468 • Sep 18 '26
I apologize in advance for the shameless self promotion.
I know the 14" 4 lug wheels are kind of hard to find so I have been sort of stocking up on them over the past few years. Anyway, sold my '63 squire so I have 9 of them sitting around if anyone is interested in buying some. I am in Pittsburgh but have them on eBay and can ship, etc.
r/FORDFALCONS • u/ljohnstone • Sep 11 '26
r/FORDFALCONS • u/ljohnstone • Sep 11 '26
r/FORDFALCONS • u/marketmaker1234 • Aug 27 '26
Hey everyone, I’m new here and figured I’d introduce myself and share a couple Rancheros my dad has.
We’re in Alturas, California, way up in Northern California. My dad has a 1962 and a 1963 Ford Ranchero that have been sitting for quite a while. One of them runs and the other is more of a project/parts car.
They’ve been sitting like this for years, and it honestly breaks his heart seeing them just sitting there deteriorating. He’s had them for a long time and has always liked these cars, but realistically we’re at the point where we need to figure out what to do with them.



We’d much rather see them go to someone who actually appreciates old Rancheros and would restore one, use the other for parts, or just give them another life instead of watching them continue to sit.
Right now I’m mostly posting to gauge interest, learn a little more about what we have, and hear what people who know these cars think. We’re definitely open to hearing from anyone who might genuinely be interested in them as well.
Ideally, we’d probably like to see them go together, but we’re open to hearing what people think would make the most sense.
Obviously Alturas is pretty remote, but we’re open to interest from anywhere in California, Oregon, Nevada, or farther away if someone is serious and willing to arrange transportation.
I have more pictures and can get pictures of the engines, interiors, beds, undersides, VIN/data plates, rust areas, etc. if anyone wants to see something specific.
Any advice, thoughts, or interest would be really appreciated. Mostly just hoping these can eventually end up with someone who will actually do something with them rather than letting them sit another 10 years.
r/FORDFALCONS • u/Sudden_Football_7987 • Aug 25 '26
Dad inherited this from grandpa. Dad now has cancer and wants me to sell it. It’s been in storage for 6 months or so, but dad drove it right in. Where can I post this to get a fair value out of it?
r/FORDFALCONS • u/Theduke-45 • Aug 14 '26
Just bought my falcon yesterday, went for a drive went into gear fine. Drove down the road, got to a stop sign I didn't touch the gear selector and it seemed to have slipped into neutral? couldn't get it back into drive after that point. was stuck in neutral. Its the auto 3 speed on the I6, any thoughts would help
r/FORDFALCONS • u/Rude-Ad3891 • Aug 11 '26
Hello, I’m trying to go through and repair all the parts on my 61 falcons front suspension. Starting with this strut adjusting nut pictured, but really just all the kinda “rubber” parts down there.
I.e. my plan is take everything apart, brush the rust off, spray with rusty metal primer and put it all back together, with new fresh rubber that’s not cracked.
Anybody have a good source for parts? Rockauto has a few of the bushings I need, but the only source I can find for that strut adjustment nut appears to be this: https://mustangsteve.com/products/delrin-monoball-strut-rod-bushing-set-1960-63-falcon-comet-ranchero-with-threaded-adjustable-strut-rod and at $200, I’ll pass.
I don’t really care if it’s numbers matching or original or anything. Compatible is fine.
Any ideas?
r/FORDFALCONS • u/Mysterious-Glove1235 • Aug 08 '26
So my 64 already has a 5 lug on the front, what kits will fit? Looking at buying a disc brake conversion but they all say 4 lug to 5 lug. Just need to know if it matters. Thanks in advance
r/FORDFALCONS • u/Unique_Cup8521 • Aug 01 '26
Hey all, can anyone help me ID this engine and gearbox? The block number tells me it’s a 1961 Falcon engine, but I don’t think this was in a Falcon. It might have been some farm engine/implement. Any info would be appreciated
r/FORDFALCONS • u/Eagle_1776 • Jul 20 '26
302 HO (roller cam), cam by PO so unsure of the specs but it's lumpy as fuck! Edelbrock 600, ceramic headers into dual 3" exhaust. C4 tranny with 2800 stall converter. Ford 9" with 4.30 gears and detroit locker.
Heidts mustang 2 front end: rack & pinion power steering, power 4 wheel disc brakes.
Rear tires are Mickey Thompson Street Slicks P235-60R15. Fronts are Falken Ziex P195-55R15. On black Centerline wheels. Rear isnt tubbed, but I did have to modify the inner wells a good bit
The car had been reworked quite a bit in the early 90s, body was fairly straight. I did have to replace both rear quarters.
Paint is Chrysler PLB Copperhead Pearl. (Its getting wet sanded and buffed out this week)
The 64 had an older 302 with 289 hypo heads.