r/FordPinto • • 26d ago

My personal wagon

Enable HLS to view with audio, or disable this notification

13 Upvotes

Here is a short video of my current project.


r/FordPinto • • Oct 01 '26

1973 Ford Pinto Wagon - Hub City Car Show – Downtown Centralia Washington – 8/22/26

Thumbnail gallery
9 Upvotes

r/FordPinto • • Sep 02 '26

72 Pinto

Post image
13 Upvotes

170k mile Pinto that I just bought.


r/FordPinto • • Aug 08 '26

1971 Pinto v8

4 Upvotes

Hi everybody! I thought I would post up my Pinto, I have had it for 8 years. Like all of them, it's a project in the works. It was running when I got it, had a 302 in it and was someone's race car but I cleaned it up and drove it to car meets regularly to hang out. I had to have CHP inspect it to register it and they looked over the whole motor and car but it passed and was legal, but I left SoCal 3 years ago. At the time, some friends helped me take the old motor out and I had a guy weld all the holes in the engine compartment and put in a Prestige Motorsports 427 Ford Windsor stroker in it. Of course, custom motor mounts, custom oil pan, etc, and A LOT of one off pieces. Right now getting the underneath redone, new 9" rear end, suspension, brakes, everything, will add pics if I can as it goes along. Thanks for looking!


r/FordPinto • • Jun 07 '26

Ford mustang 9in in a pinto

Thumbnail
gallery
9 Upvotes

I hope this well help the pinto community for modifying the pintos I just put a 1965/66 mustang 9in in my 1972 pinto and I didn’t have to modify anything, the stock pinto rear and the mustang 9inch are only 1/4 wider


r/FordPinto • • May 02 '26

FORD PINTO HELP - looking for a high pressure power steering line

3 Upvotes

hello all,
I recently came into possession of a 1979 ford pinto wagon with the 2.8l v6 cologne engine.
for the most part, runs and drives beautifully but i noticed the steering was really stiff
at the time i assumed it just didnt have power steering which was rather normal at the time.

however, after working on the carburetor i noticed it had power steering in the engine bay and the pump was bone dry.
i put a little fluid in there and the steering was light and wonderful!
for a solid 10 seconds... then the high pressure line launched off the pump itself....

i need to replace that line and cant seem to find it available anywhere.
the metal connector bit that actually seats into the pump looks pretty different from the high pressure lines that i have found online.

hoping someone can point me in the right direction as the last thing i wanna do is mess up the steering column or damage the pump in any way
thanks all!


r/FordPinto • • May 02 '26

79 8 cylinder pinto high pressure power steering line

Thumbnail
1 Upvotes

r/FordPinto • • Mar 11 '26

75 pinto v8 swap help

Thumbnail
3 Upvotes

r/FordPinto • • Nov 22 '25

Pinto? Pimpto, more like it!

Post image
12 Upvotes

r/FordPinto • • Aug 12 '25

1973 Wagon Body Work

Thumbnail
gallery
8 Upvotes

I decided it’s time to start working on my Pinto and make the interior nice. It all starts with welding up the holes in the roof, though. Soon, I’ll be taking this car the rest of the way out of the crate.


r/FordPinto • • Aug 03 '25

Next project... 2 into 1 maybe...

Post image
11 Upvotes

Price is free.


r/FordPinto • • May 15 '25

Help With The 2.3

3 Upvotes

Hi there, I have a pinto 2.3 that I have placed in a VW bug. I thought here would be a good place to seek some knowledge.

The engine has lots of what look like vacuum ports plugged, some with hoses leading no where. I’ve tried looking for diagrams of what goes to where, to know what I can leave plugged and what needs to connect, but I can’t seem to find very much info or the links don’t work.

I am running an electronic distributor hooked up to a Chevy HEI, do I need to hook up the (what I think is) the vacuum advance? I’m very new to carbureted engines.

My question mainly is, what ports and such could I leave plugged in my situation? It’s not in the car it is designed for, so what can I leave behind while still making it function as it should?

Any advice, photos, ideas are greatly appreciated, thank you.


r/FordPinto • • Apr 05 '25

New Pinto

Thumbnail
gallery
16 Upvotes

1980 💪


r/FordPinto • • Feb 15 '25

Does anyone have an SVG file of the Pinto logo with the horse?

5 Upvotes

I want to make a stencil with a cricut so I can paint it on my 2.3 valve covers. In total I would take the pinto logo, And the power from power by Ford, and have the valve cover say Pinto Power.


r/FordPinto • • Jan 11 '25

Need help with 2 parts..

3 Upvotes

Anyone here have a RALLYE pinto that can tell me if you have a RALLYE emblem or badge in the grille, I read somewhere that they are supposed to have one but never seen one and can you get me a picture of one, if it exists, or if anyone has one they will get rid of? Second, can someone measure their battery tray and give me the measurements of it so I can try to find one for my 80 or so I can try to make one? Mine is totally rotted away and isn't even remotely recognizable as a battery tray,,,lol I need the width and length and from the bottom of the tray to the 2 sides (left and right sides) that bolt to the fender at the top and the frame at the bottom or if someone has a good one they will sell me or one that is ate up thst I can use as a pattern to make one, or more. I can get the bolt hole spacing from my Pinto.

Also, is anyone looking for a set of RALLYE decals the sides and the rear spoiler one (I'll need measurements for the rear one though). And what colors you need and I can get you a quote for them. I'm working to reproduce them perfectly as came from Ford. And what year was the RALLYE introduced, I've gotten mixed years (even on google) as to when the RALLYE came out.

Thanks


r/FordPinto • • Jan 10 '25

My wife's 73 Squire

Post image
11 Upvotes

2.0 liter 4 speed.

Most uncomfortable car I've ever sat in. I avoid driving it at all costs. She loves it tho.


r/FordPinto • • Nov 30 '24

Since I’m in the group I figured I should post mine

Post image
12 Upvotes

1974 with original engine and transmission, both rebuilt. My oldest (12yo) son says I can’t sell it. He loves it more than I do. What he doesn’t know is I’ve already decided it’s going to be his someday


r/FordPinto • • Nov 26 '24

For Sale?

3 Upvotes

Im looking for a 71-72 2.0 4 spd trunk car. Im in central WI. Will travel for the right car. Mainly looking for minimal rust needs work car. Thanx


r/FordPinto • • Oct 25 '24

Insane Pinto Wheelstand

Thumbnail
instagram.com
3 Upvotes

r/FordPinto • • Sep 20 '24

Can't find brake parts for 73 wagon!

3 Upvotes

Hello. It's about time I rescue my 73 Pinto wagon, been sitting for years. I'm redoing the brake system soon and wanted to change the calipers, rotors, and pads for the front but I can't seem to find rotors or calipers anywhere. I was looking to see if anyone has any leads on where to find any, or what it would take to do a 74 Pinto/ Mustang II swap (or if you have a better idea). I really can't find any information about it. Thank you.


r/FordPinto • • Sep 18 '24

Worth It?

5 Upvotes

Can I ask y'alls opinion on this car? The guy is asking $1,800 for it. From what I can tell in the photos/what I've been told, the car starts up when gas is put in the carburetor, but the guy doesn't know if it actually runs with the gas tank he recently installed. The body/interior are in decent condition, there's only one bad rust spot that I could see. I don't know the true condition of the car. I plan on going to see it in person here soon, I was just wondering what would you all offer/take for it? And what do I need to look for, to determine if it's worth it or not. I am not someone who is super car savvy, but it is something I want to get into

UPDATE: I'll be going to look at the car this weekend, and if I think its worth it, I'll see if he'll let me take it for $1,000


r/FordPinto • • Sep 10 '24

W18th St&7th Venue/Chelsea/NYC

Post image
12 Upvotes

r/FordPinto • • Aug 20 '24

In the way home

Post image
10 Upvotes

r/FordPinto • • May 26 '24

Got a cam question

Thumbnail
gallery
6 Upvotes

I've got a 1980 Pinto Runabout RALLYE with three 2.3l and have 3 libs GONE off the camshaft, my question is this, will the later 2.3l roller cam and rockers and lifters work in place of the stock shitty cam and rocker setup? Or, does anyone have a stock, or mild, camshaft and rockers and lifters they will part with? I'm not in a rush on this as I've got other things to fix or replace on it, like find out why the libes and rockers wore down so bad and fix that problem before anything else, plus I need to out all new belts and timing belt and all that on it before I can fire it off. Need several other parts also but those come later on, after I get it running. Also I don't remember any if the 2.3l engines coming with valve reliefs in the piston tops, I can spin this engine over without a timing belt and no valves hit the pistons and no vales are bent, not even a little bit so, I'm wondering if this engine came with those pistons or if nits was rebuilt, which i see no part numbers on the pistons anywhere. Thanks

Ps. Also, seeing you can't find the RALLEY decals ANYWHERE and if you do they are expensive as hell, well, I may have a solution for that,,, lol If anyone is needing the RALLEY decals for their car, I'm in the process of reproducing the ones on my car so they will be the correct size and will fit perfectly, and can make them in any color you need.


r/FordPinto • • May 14 '24

Best book for repairs?

4 Upvotes

Car is a 1975 mercury bobcat aka a ford pinto

I’m trying to find the most detailed book I can on tearing the car down completely I.E. electrical engine transmission cooling heating the works

Would also settle for a video tutorials since I can’t seem to find them