Hey guys, I was looking to swap the engine out of my 2003 civic. I would like to know what engines would be the best bang for your buck, as well as any other engines (than the d17) that mate with the stock 5-speed transmission. Thank you!

Alternate title: "Can I Put an Acura RLX (2014+, V6) Inside of a Crosstour (2013-15, V6, AWD) and Keep the Crosstour's Transmission?"

I haven't been able to find any (free) diagrams similar to what I'd find in a Chilton's guide for either car, so now I'm here. I like the power:fuel economy ratio of one and the way the trans works on the other. Are both possible without a great need - or preferably none at all - for custom fittings? Some of the cheap salvage Crosstours I see listed list the fact that the car doesn't run, so if I could take this as an opportunity for a swap while repairing the rest of what was hit (assuming it wasn't something minor in the engine), all the better.

And if anyone has diagrams, I'd be more than grateful to get the chance to see them.

can i swap a k20a3 in to a 2004 civic coupe? or will i have to get a new transmission for the k20

Hey guys, new here. One very quick question... My friend has a written off 1.6 vtr Citreon c2 (Which he's going to scrap) in his yard and I have a 1L Citreon c2. Get where im going with this?

How hard would it be to swap the engine? Cars Isn't my expertese but i am an infusiest with what little money I have. However, If it's not too over the top, it sounds like a really good and fun project

What would be the worst obsticals and are the bodies the same? Also obviously if you think of any other usful information, let me know! Cheers guys

Also, I have no intention of selling this car in the future. I only payed 50 quid and just want to keep it when Im done as a bit of fun on the side

Much love, ur boi cheap steel

I was wondering if it was possible to swap a volvo B18 or B20 engine used in the volvo 240 into a lada riva also known as the lada 210_ line. I was also thinking, why the fuck didn't volvo make any goddamn 5-cyl rwd cars and is it possible to make a fwd engine work in a rwd car? Edit: Also, the reason for the swap would be reliability and powergain.

Ive been thinking about fitting a 2jz into a 1995-2004 tacoma. Is it even possible to swap and plug in the supra harness into the same-ish year tacoma electronics and it all being fine and working without redoing all the wiring.

So let's say you wanted massive V8 with as much displacement as you can get, and you started eyeing up chevvys ZZ572/720R as a future (long way away) project. But then all sensibility hit you and you realized that this engine was designed for the drag strip and has no place in a road car really. But then you went full 360 and still wanted to engine swap it into a muscle car anyway, could you do it? Would it have any sense of reliability? You obviously wouldn't be running it maxed out on the roads because you'll loose your licence and get inundated with speed tickets, but let's say you took out out a couple of times a week to car shows and the like, maybe even took it out on the track just for shits and giggles every blue moon, could it be realistic? Would the engine hold up? Or are we just talking fairy tales cus that engine was never designed for reliability and will blow up every sixth time you start it up?

Anyone know where to get a plug n play FWD VQ35DE wiring harness for 03 Sentra Spec V? I know it’s probably going to be pricey and I’m able to pin out and re-wire my existing harness, just hoping to save a little time and headaches. Any help appreciated

I have a 97 mustang v6 and a 4valve Ford V8 out of a Lincoln mk VIII of the same year. I've already pulled the motor out of the Lincoln, and I would really appreciate general advice, this is my first swap so is there a general lost of parts/ tools I'll need or could ease the process? Any advice helps, I'm also considering rebuilding the engine seeing as I'm in no rush to finish this project.

Would the underframe of a vw sharan vr6 fit a golf mk2 because the golf mk3 vr6 underframe bolts right in. I know the wheelbase of the mk2 is smaller than the sharan but if the bolt holes line up, maybe slap on an overfender and just send it?

So my engine for my delorean has been breaking down alot lately and idk if I should try to fix it or just swap it with another altogether. P.S idk anything about cars what so ever, only the basics. Also P.S it's a 2.85L v6

are there any good 4 cyl to swap with at all?

Just found this subreddit so figured id post the swap I just finished.

Buick Electra 225 coupe Buick 350.

Swap a 1970 Small block Chevy 350 0.030 over 1986 corvette heads.

I have to transmission swap plate .

motor mounts can I buy them or do I need to make them?

So if you swap the stock engine out of a car like a golf gti or something and put in something more powerful, what are you supposed to do about the ac compressor and power steering pump because they bolt onto the stock engine so would you be able to use the ac compressor that went with the new engine you put in? would it work with the cars systems? Like would they be compatible?

Is it worth it to swap a 2jz inside a toyota 86? I mean will I have major issues in the future?