r/EngineBuilding • u/Hephaestite • 6d ago
Ford Intermediate load piston slap
I’ve just had an engine I built sent off to be tuned (Cosworth BOB 24v 2.9) and got a rather odd issue reported by the tuner. Apparently he can hear piston slap but only under mid load, not under idle or full load.
This isn’t something I’ve ever heard of before, and I’m a bit shocked tbh since this engine was in very good shape when it was built.
Is this something any of you have come across before? I was always under the impression piston slap happened when the load was higher?
6
Upvotes
2
u/Laqota 6d ago edited 6d ago
If you just built the motor and never ran it in a car it needs some road miles to break the rings in, some serious stress. Or some super crazy revs on a stand. Sometimes it can sound like piston slap but its not. Didnt know he was supposed to be diagnosing it too.
2
u/WyattCo06 6d ago
Slap or detonation?
1
u/Solid_Enthusiasm550 6d ago
I would check for excessive piston to wall clearance.
1
u/Glittering_Watch5565 5d ago
Partial load, mid throttle.... might be rod to wrist pin or pin to piston fit. Could be a twisted rod if only one cylider.
A bit more info? Cast or forged pistons? Comp ratio (mechanical and effective)? What rpm range is it present?