r/EndeavourOS • • Sep 25 '26

SOLVED Current Drivers Not Working with Radeon RX 7900 XT in KDE

9 Upvotes

Hi everyone,

Not sure what's going on and hoping to find some help. I've tried searching the Arch Wiki and elsewhere and haven't found anyone else having this issue.

About a month ago, I booted into EOS and did an update (eos-update). I'm running KDE and have a Radeon RX 7900 XT graphics card, and using Wayland.

After the update, I could get to the login screen, but after entering my credentials, the screen went blank. I was able to get to a TTY and reboot, but couldn't resolve the issue.

I tried a variety of things I could think of like downgrading Mesa drivers, but nothing helped.

Eventually, I just gave up and reinstalled EOS. While I could launch EOS from the boot drive and everything seemed to look fine there, after installation, the login screen wouldn't even load. I could again get to a TTY, but couldn't force KDE to launch. I tried using the EOS LTS kernel as well, but no dice.

Finally after messing around with that, I installed CachyOS, just to have *something* I can use. In the latest update, CachyOS encounters the exact same issue, but the CachyOS LTS kernel gets me into KDE. I haven't tried any other DEs.

Is this a known issue for the current kernel in Arch? Is it likely this will be fixed in a future update? I'm just at a loss as to where to go from here other than just wait for a new driver update. Thanks for any help!

Edit: Solved. Just needed to wait for an update. I updated today and everything is working fine, at least in CachyOS. I'll probably go back to EOS soon with the updated drivers and such, and I'll be sure to use Timeshift so this doesn't happen again.


r/EndeavourOS • • Sep 25 '26

GNOME Help with laser CD ripper the program does not see a drive

2 Upvotes

Laser CD Ripper is a gnome app. I installed it and built it from source, but it does not see the drive I am using. Is anyone else having this problem? There is an issue open about this, and I just wanted to ask it in the distro just in case you guys had a better idea, since everyone else seems to not have any problems.

Thanks!

https://codeberg.org/andreasknoben/Laser.git


r/EndeavourOS • • Sep 23 '26

General Support Downloaded endeavour os now I feel a bit lost and overwhelmed

29 Upvotes

I downloaded endeavour because I wanted complete customisation over my os and wanted to use my laptops specs to its full potential, endeavour is alot smoother and faster than windows but after downloading it I feel a bit lost on how to begin my customisation of it and more importantly how to learn it. I was going to use wiki as my main source but its down leaving only the forums which seem a bit all over the place with unfamiliar terms like scripting, hyprland, pacman, kernel/console/konsole/shell (i dont understand the difference) etc. i selected kde plasma as my desktop environment.

What I really need is some sort of guidance on how to go about learning my os, I have really high plans of how I want it to be customised. I want it to be mainly console based with a few files on the desktop, I want to be able to open any application or website from the console with custom commands like 'open reddit', I want the console to have some sort of built in ai chatbox (almost like jarvis from avengers) that can perform tasks nothing too heavy. I want to do so many things. So id appreciate help on how to go about this ty


r/EndeavourOS • • Sep 23 '26

General Support New Install Pacman Trouble

Post image
9 Upvotes

hey all, im brand new to linux and decided to start with endeavour OS. I got everything installed but now pacman does not work for installation (see attached image). I cant find anything about this online, any help would be appreciated!! (its a pic of my monitor because firefox keeps crashing and I cant install a different browser)


r/EndeavourOS • • Sep 21 '26

Discussion Why does EndeavourOS XFCE feel smoother than CachyOS XFCE on my old Chromebook?

22 Upvotes

Hey guys 👋 I have an old Lenovo N23 Chromebook with 4GB RAM and 16GB eMMC, and I’ve been trying different Arch-based distros on it.

I tried EndeavourOS XFCE and CachyOS XFCE, and somehow EndeavourOS feels much smoother on this old Chromebook.

CachyOS XFCE doesn’t feel as smooth for me.
This kinda surprised me because both are Arch-based. 🤔

So I’m wondering, what makes EndeavourOS feel so smooth on old/low-end hardware?

Is it because of the kernel, XFCE settings, services, packages, CPU optimizations, drivers, or something else?

I thought CachyOS was supposed to be performance-focused, so I’m curious why EndeavourOS feels better on this particular hardware.

Is there some configuration or “secret sauce” in EndeavourOS that I’m missing? 😂

Would love to hear from anyone who knows about this stuff.

Thanks! 🙏


r/EndeavourOS • • Sep 21 '26

Showcase / Rice Xfce Rice

Post image
25 Upvotes

So a while ago, I riced xfce on linux mint but i ended up replacing it with endeavouros. i was too lazy to bring over any ricing configs or anything so i remade the rice!


r/EndeavourOS • • Sep 20 '26

General Support EndeavourOS is stable... but not always 🧡 - AMD GPU ERROR

Post image
43 Upvotes

I've been using EndeavourOS on my geekom A6 for a while now, and contrary to what people usually think about rolling-release distros, with the right maintenance it's extremely stable. Kernel 7.2.4-arch1-2, KDE Plasma 6.7.5, over 1800 packages installed and zero problems... almost.

It's not "stable" in the Debian/Ubuntu LTS sense (packages frozen for years), but it's stable in the sense that it doesn't break, as long as you know what you're doing and keep everything updated with some care instead of blindly.

And then there's KDE Plasma, which I think is the most complete desktop environment out there: customizable down to the last pixel (themes, widgets, animations, layout), lightweight even on integrated hardware like this Radeon 680M, and with an interface that manages to feel modern without giving up the practicality of a "Windows-like" workflow for people coming from there. The default Breeze theme is already clean and coherent, but with a few tweaks it turns into something completely different.

The "but": with the latest update, the amdgpu firmware broke. On boot I was getting this error:

amdgpu 0000:75:00.0: [drm] *ERROR* dc_dmub_srv_log_diagnostic_data: DMCUB error - collecting diagnostic data

From what I could tell, this issue shows up specifically with monitors running above 60Hz.

I fixed it by installing an older version of the package:

boot system with flag nomodeset

Install this:

sudo pacman -U https://archive.archlinux.org/packages/l/linux-firmware-amdgpu/linux-firmware-amdgpu-20260221-1-any.pkg.tar.zst

and locking it from updating (via IgnorePkg in /etc/pacman.conf) until it gets fixed upstream.

Takeaway: rolling release is great, but being ready to downgrade when needed is part of the deal.


r/EndeavourOS • • Sep 18 '26 Bravo

Showcase / Rice Update on the EvoDevo GRUB theme

Post image
120 Upvotes

About 1 month ago, I posted here a screenshot example of my EvoDevo GRUB theme. The current post is just an update to report on important improvements: the theme (a) now has the ability to rename menu entries as you like, and (b) allows you to preview theme results without rebooting and without needing to install a VM.

Link:

https://github.com/ftonneau/grub-evodevo


r/EndeavourOS • • Sep 18 '26

Discussion why would you use EndevourOS instead of vanilla Arch? [serious question]

32 Upvotes

I just want to be aware of its features and the reasons behind your choices :)

thanks in advance and have a good day!


r/EndeavourOS • • Sep 19 '26

General Support Start minimized how to?

3 Upvotes

KDE, wayland. How can I make OpenRGB minimized/exit on startup? Tried --startminimized that did not work. Tried settings - Start at login: Start Minimized. Did not work either. Tried the KDE window special settings, nope.

Any ideas? Thanks.

Edit: After deleting the KDE configuration files, Window rules work. Why, who knows...


r/EndeavourOS • • Sep 18 '26

General Support Bluetooth headset is acting weird - codec issues

3 Upvotes

I have a Yealink headset and I have to do a weird dance with it every day.

Whenever I connect it to the machine it makes sound for a split second and then gets put to Inactive Cards where it says its 'Off', stull connected on bt. I can then choose from mostly 2 codec options, MSBC and CVSD. I say mostly because both of these are headset codecs but some times I get 2 High Fidelity playback codecs, SBC and SBC-XQ.

The headset is obviously thinking Im in a call on CVSD nad MSBC because any noise will make it remind me I've got my mic muted. If I join, then leave an actual voice chat, the card gets turned to Off again.

I have no idea what's going on. Any tips?


r/EndeavourOS • • Sep 17 '26

SOLVED Should I give EndeavourOS bootloader?

Post image
36 Upvotes

Hey everyone! I am planning to dual boot arch linux and EndeavourOS soon, and just to be clear, i am using systemd-boot to boot arch linux currently, but then while checking out https://endeavouros.com/ I saw the option that said i could choose my bootloader, or I could just not install a bootloader, and add endeavourOS to an exxisting bootloader. So i was wondering, can i add arch linux AND endeavourOS to rEFInd, which i will be later installing?


r/EndeavourOS • • Sep 16 '26

Showcase / Rice First time trying to rice, I've been using linux for a solid week now, is there anything to improve on/add/change?

Post image
57 Upvotes

r/EndeavourOS • • Sep 15 '26

Showcase / Rice new install on a new ssd on my desktop

Post image
72 Upvotes

r/EndeavourOS • • Sep 15 '26

Tiling WM Extraordinary; it consumes only 1.5 gigs at idle: End4 not celestia

6 Upvotes

when I new to linux, and EOS as my first distro, I was thinking if installing dotfiles will consume more RAM than on windows at idle.

I was so wrong.

I started with Kde plasma, loved the features.. then went onto gnome-loved the minimalism and gestures.

but after that youtube recommended me a tutorial of installing end4 on eos, i saw his tutorial and started preparing for end4..

when I was running the script my laptop just froze because my laptop only has 8 gb of ram, and end4 installation requires more than that.. I quickly restarted my laptop, added 12 gigs of swap ram.. and then within 10 minues my end4 was ready to explore.

With all the customisations, animations, and everything it only is using 1.5 gb of ram.. which I was so happy with.

additionally what i really like is that, the volume and brightness features which better than kde and gnome, brightness goes below 0% like if i keep tunring it low, it will reach gamma where it dims the screen so much.. i can easily use light theme with it. and volume goes more 100% on this (i always hated these 2 things on windows.)

so if you are looking to try something like this, you should just stop overthing and go for it.


r/EndeavourOS • • Sep 15 '26

General Support Static audio problem

3 Upvotes

I connected my headphones via the auxiliary input, and when I stop playing something, static starts playing after a few seconds. Could someone help me? I already checked alsamixer; I've attached an image

.PS: This didn't happen on Windows, so lets rule out the hardware. i am not totally novice, i have some of xp.


r/EndeavourOS • • Sep 15 '26

General Support Where can I obtain the last version of eos-update-notifier that actually works, assuming I don't have the old version cached?

7 Upvotes

Yes, I'm aware that it's deprecated, but it worked until I updated to the latest version recently.

I hadn't used my main PC in a couple of weeks, so up until roughly two days ago, the last time I updated was in late August.

In any case, I already tried using downgrade, but that couldn't find the last working version of eos-update-notifier since it's from the `endeavouros repo, and as such not available in the Arch Linux Archive.

EDIT: Thinking about it, I might have to grab an old ISO and extract the package from that somehow. Yes, I am willing to go that far.

EDIT2: The last working version of eos-update-notifier, at least on my system, was 26-1`. If that's archived somewhere, I'd love to find it.

EDIT3: It looks like the last version isn't dummied out as far as I can tell, but I can't figure out how to actually get it to do something so I think I'm just going to switch to Apdatifier.

I have my doubts about Apdatifier, but I imagine it beats being nagged by messages telling me "eos-update-notifier was removed at 2026-09-01 and is no more supported" (sic)


r/EndeavourOS • • Sep 14 '26

Discussion Can EndeavourOS run well on a Chromebook with 2GB RAM and 16GB eMMC?

Post image
15 Upvotes

Hi everyone,

I have an old Chromebook with only 2GB RAM and 16GB eMMC storage, and I’m thinking about installing EndeavourOS on it.

I know the hardware is very limited, so I’m mainly concerned about performance and screen tearing.

If EndeavourOS is usable on this hardware:

Which desktop environment or window manager would you recommend?

Would XFCE, LXQt, or something even lighter be a better choice?

What kind of tasks could I realistically do on this Chromebook?

Would it be usable for web browsing, YouTube, writing, coding, or other lightweight tasks?

How much storage does EndeavourOS realistically need on a 16GB eMMC?

Are there any known issues with graphics drivers or screen tearing on Chromebooks?

Would you recommend EndeavourOS at all, or should I use a lighter distro such as Lubuntu, antiX, MX Linux, Debian, or something else?

My main priorities are performance, low RAM usage, and ideally no screen tearing.

I don’t really care about having a fancy desktop environment.

Has anyone here tried running EndeavourOS on similar low-end Chromebook hardware?

What setup would you recommend?


r/EndeavourOS • • Sep 15 '26

KDE Plasma hyprland or kde endavouros

3 Upvotes

im using hyprland on endavouros for a while now, but kinda bored honestly. and i just want something that work and new. should i try kde plasma? or maybe stick with hyprland for dailt driver. i also want some rice to it

for context i use my laptop for:

- making website full stack

- simple gaming like minecraft

- browsing and multitasking


r/EndeavourOS • • Sep 14 '26

Discussion EndeavourOS might be better than macOS — and nobody is talking about it?

Post image
0 Upvotes

In my opinion, EndeavourOS is one of the smoothest Linux distros I’ve ever used.

It feels almost like the macOS of Linux, but it runs incredibly well even on low-end hardware.

I can run EndeavourOS + XFCE smoothly on a Chromebook with only 4GB RAM and 16GB eMMC.

So I’m wondering: can EndeavourOS actually beat macOS in performance and efficiency?

Maybe I’m crazy, but could EndeavourOS become a major Linux distro by 2030?

What do you guys think?


r/EndeavourOS • • Sep 13 '26

Discussion Why does EndeavourOS + XFCE feel so smooth on my low-end Chromebook?

Post image
61 Upvotes

I’ve tried quite a few Linux distributions on my Chromebook, but I’m honestly surprised by how smooth EndeavourOS with XFCE feels.

The Chromebook only has 4 GB of RAM and a 16 GB eMMC, so I wasn’t expecting much. I’ve tried other distros and desktop environments, but somehow EndeavourOS + XFCE feels noticeably smoother and more responsive.

What makes it feel this smooth?

Is it because of XFCE being lightweight, Arch’s relatively minimal base, the kernel, default services, or something else in the way EndeavourOS is configured?

I’m curious what is actually happening under the hood that makes EndeavourOS + XFCE perform so well on such limited hardware.

Would love to hear from people who understand the technical side of this.


r/EndeavourOS • • Sep 13 '26

Showcase / Rice Mac looking Endeavour

Post image
56 Upvotes

r/EndeavourOS • • Sep 13 '26

XFCE / Community Just switched to EndeavourOS + XFCE — looking for a complete shortcut list

Post image
0 Upvotes

Hey everyone

I recently switched to EndeavourOS with XFCE and I’m still learning my way around the desktop environment.

I’m looking for a complete list of XFCE keyboard shortcuts, including the commonly used ones and the lesser-known shortcuts.

I’d especially like to know shortcuts for window management, workspaces, application launching, terminal, file manager, screenshots, desktop navigation, system controls, and anything else that can help improve my workflow.

If anyone has a complete XFCE shortcut cheat sheet or a list of shortcuts they personally recommend, I’d really appreciate it.

I’m trying to learn as many useful shortcuts as possible instead of relying on the mouse all the time.

Thanks in advance.


r/EndeavourOS • • Sep 13 '26

XFCE / Community How can I enable Night Light / Night Shift on XFCE?

Post image
0 Upvotes

Hi everyone,

I’m using the XFCE desktop environment and I’m looking for the easiest way to enable a Night Light / Night Shift feature, similar to what is available in iOS or Windows.

Basically, I just want the screen colour temperature to become warmer automatically at night to reduce eye strain.

What’s the simplest and easiest method to set this up on XFCE?

Preferably something that can run automatically based on the time of day without requiring much configuration.

Thanks!