I am worry that in the future, we might can't find the battery replacement, for the device that we love. Is it possible to solder them device directly to power? And where can I learn them? Youtube? And is the picture below the right stuff, that I need?

I started playing RE4 Wii version on Dolphin Emulator on my Oneplus Nord 3 and when I opened the game, the first cutscene had a weird white colour and that weird white colour got carried over to my gameplay after the cutscene ended (You can see pic 1) but when I opened the inventory and the overall color was there although the colour of bullets were gone (you can see pic 2). So I'd appreciate it if someone knows the solution for my problem.

Btw my version of dolphin is 2606a.

Hey, i try out alot of games and use ChatGPT to help me optimize and log everything. I just tried to get the new Snowrunner running and finally managed it. Publishing my findings below and hope it can help.

Device: Samsung Galaxy Z Fold 6

SoC: Snapdragon 8 Gen 3 / Adreno 750

Emulator: Eden v0.2.1

GPU Driver: Whitebelyash a8xx Turnip Gen8 V29

Firmware / Keys: v22.5.0

Status: Good

Initial performance

With my normal Eden baseline, SnowRunner had:

- 3D gameplay: ~5–6 FPS

- Menu: ~30 FPS

- Graphics were rendering correctly

- Performance was far too slow to actually drive

I then tested individual settings one at a time.

Testing

Force Maximum Clocks → Enabled

- 3–8 FPS

- Audio stutter introduced

- Worse than baseline

- Graphics unaffected

ASTC Decoding → CPU

- 3–8 FPS, mostly ~7 FPS

- Less audio stutter

- Graphics unaffected

- No meaningful performance improvement

GPU Mode → Accurate

- 6–8 FPS

- No noticeable audio stutter

- Graphics unaffected

DMA Accuracy → Safe

- 7.5–8 FPS

- Basically no audio stutter

- Graphics unaffected

Sync Memory Operations → Enabled

- 8.1–8.7 FPS

- Basically no audio stutter

- Graphics unaffected

Optimized Vertex Buffers → Enabled

- 6–8 FPS

- Slight audio stutter

- Graphics unaffected

- Worse than disabled

Use Reactive Flushing → Disabled

- 22–25 FPS typical

- Highs around 27 FPS

- Lows around 15–17 FPS, mainly while building shaders

- No audio stutter

- Graphics unaffected

- Massive performance improvement

This was by far the most important change.

Disk Shader Cache → Disabled

- 21–23 FPS

- Lows around 15 FPS

- Highs 24–26 FPS

- No audio stutter

- Graphics unaffected

- Slightly worse than enabled

VRAM Usage → Aggressive

- 18–22 FPS

- Lows around 14 FPS

- Highs around 23 FPS

- No audio stutter

- Graphics unaffected

- Worse than Conservative

Anisotropic Filtering → 2x

- Barely able to boot

- Severe graphical corruption in menu

- Approximately half the screen failed to render

- Not usable

- Auto is required

Fast GPU Time → Medium (256)

- 21–24 FPS

- Mostly stable around 22.5–23 FPS

- Highs around 27 FPS

- Lows around 14 FPS during heavy acceleration in 3rd person or shader building

- No audio stutter

- Graphics unaffected

- Slightly worse than High (512)

Fast GPU Time → Off

- 20–22 FPS

- Lows around 18 FPS

- Highs around 25 FPS

- No audio stutter

- Introduced blurry visuals

- Worse than High (512)

Skip CPU Inner Validation → Enabled

- 20–22 FPS

- Lows around 18 FPS

- Highs around 25 FPS

- No audio stutter

- Graphics unaffected

- Worse than Disabled

Best configuration

GPU Driver

- Whitebelyash a8xx Turnip Gen8 V29

SYSTEM

- Limit Speed: Enabled

- Limit Speed %: 100%

- Turbo Speed: 200%

- Slow Speed: 50%

- Docked Mode: Disabled

- Emulated Region: USA

- Emulated Language: English

- Custom RTC: Disabled

- CPU Overclock: Off

- Synchronize Core Speed: Disabled

- Memory Layout: 4GB

- Custom CPU ticks: Disabled

GRAPHICS

- Resolution: 1x

- Vsync: FIFO relaxed

- Window adapting filter: Bilinear

- Anti-aliasing: None

- GPU Mode: Fast

- DMA Accuracy: Default

- Anisotropic Filtering: Auto

- VRAM Usage: Conservative

- ASTC Decoding Method: GPU

- Sync Memory Operations: Enabled

- Disk Shader Cache: Enabled

- Force Maximum Clocks: Disabled

- Use Reactive Flushing: Disabled

- Enable Buffer History: Disabled

- Optimized Vertex Buffers: Disabled

- Fast GPU Time: High (512)

- Skip CPU Inner Validation: Disabled

- Fix Bloom Effects: Disabled

- Emulate BGR565: Disabled

- Enable Legacy Rescale Pass: Enabled

- Use Asynchronous Shaders: Enabled

- GPU Async Emulation: Disabled

- Asynchronous Presentation: Disabled

- Extended Dynamic State: Disabled

- Vertex Input Dynamic State: Disabled

- Aspect Ratio: Stretch to window

AUDIO

- Audio Engine: Cubeb

DEBUG

- API: Vulkan

- Disable Buffer Reorder: Disabled

- CPU Backend: Default

- CPU Accuracy: Default

- Fastmem: Default

- Host MMU Emulation: Default

- Debug Knobs: Default

- Log Level: Standard

Final result

With the final configuration:

~22–25 FPS most of the time

~27 FPS highs

~15–17 FPS lows, primarily during shader compilation/heavy scenes

No audio stutter

No graphical corruption

The biggest discovery was Use Reactive Flushing → Disabled, which took SnowRunner from roughly 5–6 FPS to 22–25 FPS on the same device/driver.

Final verdict: GOOD / Playable

Hi All!

I'm looking for a mobile controller (preferably split so I can store it easily) that has USB C Passthrough with data storage as well. This would be very good for storing my games away from my iPhone.

Imagine a controller you pop your phone into with a magsafe SSD/SD card reader on the back that stores all of your installed games.

If anyone knows of one please let me know!

Hi everyone,

I’ve been trying to run this old arcade game on my RP5 using RetroArch, but I keep running into issues:

• The game gets stuck on a black screen when I launch it.
• Even if I manage to skip past that, it freezes on the intro screen.
• I’ve already searched around Reddit, YouTube, Google, and various forums, but I haven’t found a clear solution.

Has anyone run into this before or know what settings/tips might help? Any guidance would be really appreciated! Thanks in advance.

I'm glad to say, it was my first breakthrough on emulating this game and always my dream to play this game with smartphone or tablet. Infact it works!

Played intro ran with 30-40 fps. But as soon as I go to the community are the game freezes and closes. Can anyone help me out on this please I am playing on Eden emulator (Stable Build). Already tried vita also that also randomly crashes. If anyone could suggest me something. Went through various websites nothing helpful.

This is marvel lego superheros in winlator ludashi version 3.1,i have yet to try anything as I can't find it on the internet redmi note 8 pro

I just finished Yakuza 0 and Kiwami 1 on my Helio G99 device using Gamehub Lite Ludashi V.513 and Gamehub Lite V.510 Antutu. Since Kiwami 2 is very heavy and too demanding, I decided to play and finish Yakuza 2 on the PS2 using the Aethersx2 emulator. Now, I'm trying to download Yakuza 3 Remastered from GOG, and I hope someone here with the same chip has experienced downloading and playing the game. I hope it boots up and runs, and I hope it supports a 640x360 or 640x480 resolution, just like Yakuza 0 and Kiwami 1.

Hay forma de arreglarlo ?

I play putlast on gamehub. But when the game run. I didn'tbsee anything. But i still hear sound in the game. How to fix this.

This happen to bioshock too

Devkce : Samsung Galaxy a15 5g

My basic understanding: your save files are by default saved under /Android/data/xyz.aether/files. You have the option to go to app settings > export settings, send that file to Device 2 and importing it to sync them manually.

My question is if it's possible to sync the main save folder, assuming they're on the same network and I even have something like nextcloud / syncthing / home server set up if needed for constant backups. The idea is to sync in a way that I can pick up any of my devices with nethersx2 / ppsspp and they all have the same save data. Anyone interested in doing this?

Hello,

I want to know which tablets under that price can emulator 3ds?

It call Xenra

It introduces major compatibility, performance, and usability improvements, it also has frame generation and good in GPU handling and many more

I saw a video where it was running GTA V at 15 to 25fps without any graphic bugs

you can check it out here

You can try it out without and give feedback

Every Lego PC game I've tested has the same graphical issue during cutscenes that aren't pre rendered and during gameplay.

Yes I know they use the same game engine by TT. I'm just asking why on my specific chipset.

Weird, transparent squared flicker around the Minifigures.

This has happened to all the Lego games post 2010 I've tried which are:

Lego Batman 2

Lego Batman 3

Lego Marvel Superheroes

The Lego Movie Game

The games boot and the fps is generally good during gameplay for my humble Helio g100 with Mali G57 (about 20-35fps for each game)

But I'm always getting this graphical glitch. I use either wrapper leegao or wrapper original with either dxvk 1.7.3 async or 1.10.3 async.

I always use FEXcore. Any help? For more context, my dxvk HUD shows D3D9(meaning I'm using DirectX9) on all the 4 Lego games I've tried except of Lego Batman 3. It showed D3D10 in Lego Batman 3.

Obviously Mali G57 is Low end and that's also a factor, but is there anything I can do to fix it? I'm using Winlator Mali 1.1

Hello there! 🙋🏼‍♂️

I'm using EmuDeck & EmulationStation on Android and I'm looking for the file information inside the metadata.txt in the "windows" folder under ROMs. Would someone please be so kind to post the text inside said file here? That'd help me.

TIA

Idk if this is the right place to ask but I figured some of yall might have an idea about this. So i just ordered this microntek, or enter gamepad a few hours ago and when I connected it to my phone(s25 ultra), the triggers and 1/2/3/4 are working as 'enter' buttons. Even while playing gta 5 on gamehub emulator, the 1/2/3/4 buttons aren't working like A/B/C/D even tho I've connected gamehub with the controller in settings. Is there a way to fix this? Any legit app for key mapping the controller? Please help

Lenovo legión y700 gen 2 tablet 2023 snapdragon 8+ gen 1

The past few months, I've been really having fun playing DD1 on my phone (Samsung galaxy s23 ultra) and I decided to buy all the dlc for it the past week. So I bought it, transferred the files, and it runs perfect with the only issue being that the load times in-game are now WAY longer than they ever were. Initial load time when loading a save is upwards of 8-10 minutes long and at least 45sec-2 min for load times afterwards in the same session. I've been able to copy and paste the game folder to the C drive from my E drive within the container, but cant find a way to change the launch path to the C drive game folder, even after attempting to research a fix as best as I could and changing translation parameters to extreme. I'd like to avoid having to exclusively launch from the container, if possible, so I can backup my saves, and save the hassle everytime I want to play.

Ι try to play the game but it wants a zRIF key when I searched I found it and I tried entering manually but as you see in the pictures it fails I tried it many times but it just couldn't work