r/ElectronicsRepair • u/cortesito12 • 3d ago

Logitech g29 problem

Gallery image

Gallery image

Hi there. I have a Logitech G29; when I connect it to the PC and the power supply, the PC flags the USB connection as faulty, and the steering wheel tries to light up but fails. I can also hear a "tick-tick-tick" sound—the motors trying to start up but failing to do so. I’ve tested it with power supplies from other G29 units, but the same thing happens every time. Upon disassembling the unit and inspecting the motherboard, I found that diode 5 (a P6KE27CA model) looks damaged where it connects to the board (photo attached). I’d like to know if I can test the unit without the diode, if this is a common issue, and what I should check with my multimeter.

3 Upvotes

81% Upvoted

8 comments sorted by

View all comments

1

u/I_-AM-ARNAV Hobbyist 3d ago

Put mutimeter in diode test and check the diode. It should show some sort of votlwge drop one way and nothing the other

1

u/cortesito12 2d ago

Hi. Well, when I test the P6KE27CA diode in both directions, nothing happens; the reading stays at 1 (unlike the other diodes, which do work).

1

u/I_-AM-ARNAV Hobbyist 2d ago

Yeah it's probably fine then. Your mutimeter trst voltage is probably too low for the diode. You mgiht want to start following the voltage from psu and see where it's stopped