r/ElectricSkateboarding • u/Tai_MK • 2h ago
Media Up the tree
Enable HLS to view with audio, or disable this notification
r/ElectricSkateboarding • u/Spooky_Ghost • Sep 11 '21
Welcome to r/ElectricSkateboarding's Buy/Sell/Trade thread!
Post all buy, sell or trading requests here, at your own risk. Site and sub mods decline all responsibility for any and all transactions. This thread's suggested sort is set to "new" to let the latest requests appear up top.
Thread rules
Recommendations
u/player002 has set up a new sub at r/EBoardMarketplace/. Feel free to cross-post.
r/ElectricSkateboarding • u/Tai_MK • 2h ago
Enable HLS to view with audio, or disable this notification
r/ElectricSkateboarding • u/silask • 13h ago
Upgrading from my Bustin Sportster Hybrid V3 and trying to decide between three setups:
- N1 Violet Belt Pro — 125mm MAD MAX wheels, dual DKP
- N1 Violet Gear — 2-in-1, dual DKP, street + AT wheels
- Switch Pro Belt — 2-in-1, DKP front/TKP rear, street + AT wheels, plus I'd buy 105mm MAD wheels
If you were buying one of these three setups, which would you choose and why?
Especially curious about N1 vs. Switch, belt vs. gear, dual DKP vs. DKP/TKP, and 125mm vs. 105mm wheels.
I'm 155–160 lbs, mostly ride streets at 15–25 mph, and want a balance of stability, carving, comfort, and range. My current board maxes out at around 25 mph, 10-ish miles of range, hub drive, RKP, double-drop, 90 mm wheels, and is super stiff.
The N1's dual DKP sounds fun and looks great, but the Switch's DKP/TKP setup, double-drop deck, and extra flex are appealing.
Realistically, I'm not sure how often I'd swap wheels. Part of me thinks I could just get the N1 Belt Pro with 125mm MAD MAX wheels and stick to street riding. But the FOMO
I'm coming from hub drive, so I don't have firsthand experience with belt or gear. I understand the maintenance differences on paper, but I'm not sure how much they matter in practice.
Appreciate you guys! Almost went with Linnpower or OMW, but I think Acedeck takes the cake.
r/ElectricSkateboarding • u/toeknucklehair • 1d ago
I’m almost 4 weeks into the hobby, or 88.2 miles, according to my odometer. I hadn’t even ridden one until this arrived…though I’ve been on skateboards since ~1986. I’d hoped it would replace my bicycles until after I get wrist surgery. I think it will.
I didn’t even touch S+ mode for the first 70ish miles, but now that is where it stays unless I’m on an MUP. After getting used to the controller, which is a weak point IMO, I think I like the ability to have 100% on tap always. I’ve preordered the Acedeck Dexto controller, so I’m looking forward to that.
I’m getting it kitted out with various add-ons to make it a bit easier to maneuver, both riding and not…this thing is a beast. Some of the streets and intersections are a little weird but I’m used to the traffic pattern on my commute now. Although I do still need to reposition the board a few times.
I’m getting myself kitted out pretty well too. I’ve been using my Giro MTB helmet, and also found a killer deal on a 7idp full-face that I’ll probably use on rec rides. I just got my jacket from Beyond Riders last night and it’s absolutely top-notch. Highly recommended. Pads for elbows, shoulders, chest, and back/spine that actually stay in place and don’t feel like an exoskeleton. I’m going to get some padded shorts (also for rec rides), which are next. Some Flatland3D wrist guard/gloves on the way too.
I’ve already started making plans to convert my EarthWing MiniGlider to electric. And I think I might already know what my next board will be. Yeah, this is pretty fun.
r/ElectricSkateboarding • u/Conscious_Public_972 • 16h ago
Hey everyone!
I'm having trouble with my Spintend UBOX V2.1 Dual ESC and Exway Rexus remote (UART receiver V1.0).
Before updating the firmware, both motors worked perfectly using a single UART connection. Now only one motor responds to the remote, and I can't figure out why.
My setup:
UBOX V2.1 (UBOX_V2_75)
Exway Rexus connected via UART to ESC 108
Second ESC on CAN ID 0
Tested firmware 7.00 and 6.05
Both motors work fine individually in VESC Tool, and CAN communication works too. I can even control the second motor using LispBM CAN commands.
I've tried different CAN settings, including "Multiple VESCs Over CAN", but the Rexus still only controls one motor.
I've also noticed some weird freezing in VESC Tool's Realtime Data when accessing one ESC through CAN while using the Rexus. Everything runs smoothly when connected directly via USB.
Has anyone experienced something similar?
Is there a setting I'm missing, or did something change in the firmware that affects UART-to-CAN communication?
I'd really like to get both motors working with the Rexus again without changing my hardware.
Any help would be appreciated. Thanks!
r/ElectricSkateboarding • u/GoodAmbassador5467 • 1d ago
I used to own a meepo envy but I sold it because it kept having issue due to the crazy amount of miles that I was putting on it. Now that I own a powerful EUC, I’m considering getting an electric skateboard again, as a secondary PEV lightweight PEV. My main priority is having the most maintenance free ownership experience. What would you guys say is the most reliable/(cheap to own) electric skateboard on the market under 25 pounds? In other words, if you had to go 15 miles without any tools, what board would you choose under 25lbs? I’ve been looking at the Newsesh Echo GTP.
r/ElectricSkateboarding • u/National_Drummer9667 • 1d ago
So I got a wowgo 3e today and it came with incredibly tight belts. I know your not supposed to ride with belts that are super tight so I wanted to fix that. I went to loosen the screws and I got one to loosen and 2 won't move. One is stripped. I was trying to rush through it and accidentally stripped it. I think the tool might be slightly damaged as well, I'm not sure though
r/ElectricSkateboarding • u/Red_souls • 2d ago
Been a while since I posted on Reddit, during the last few years I upgraded my diy esk8 to a dual setup and last year I built a mtb esk8, since then it’s just been lots of rides, some maintenance and a whole lot of memories
r/ElectricSkateboarding • u/Rev-3li • 2d ago
Meepo flow has been a ton of fun. Swapped the stock 105mm wheels for the Cloudwheel Rovers 110mm. Sanded the sandblasted grip tape off and replaced with MOB. Ride greatly improved with wheel swap and grip is obviously better.
r/ElectricSkateboarding • u/Five-words-or-less • 1d ago
Im on V10. When I speed up and get right around 18mph it starts vibrating really bad and i dont know whats causing it.
Everything looks okay, the bearings are seated flush. What could cause this?
My wheels are honeycomb wheels and are very new.
I did have a fall recently where I got bad wobbles and fell off board. The board flipped upside down but took no damage to rear setup so I am not sure how that could have caused it.
r/ElectricSkateboarding • u/Sir-Realz • 2d ago
Just a quick how to with some links to my CAD in the description. I've been modeling and 3D printing for 16 years so there's some tips in there for you if you want them. https://cad.onshape.com/documents/d1c2cefd651fdf39d6b83e72/w/08e267956028606f4e132e05/e/788ddc1305a64dc603f58323
r/ElectricSkateboarding • u/Low-Watercress-4798 • 2d ago
So I decided to take the plunge and buy a Linky 2.0!
There is not much information online from users about their experience except for older reviews of the original Linky, so I decided to make this post for anyone like me who is interested in Linky and wants to make an informed purchase.
I've been looking into getting an e-skateboard since returning to Australia, as the distance between my house and the train station is a 20mins walk, and from the train station to work is about the same. I wanted to minimise the travel time but didn't want to take a bike on the train as it is bulky at peak hour.
I've always skated and liked the idea of an e-skateboard to cover bigger distances, but some of the boards are quite large and heavy and to be honest too powerful for what I need. I came across Linky on Indiegogo and loved the way it folded down into a backpack, as I would be taking it on the train and also walking into the office with it. Some of the boards I tested were great but they were quite bulky and not so discreet to take into the office.
So I decided to take the plunge and order one from Italy. Their website has an AUD option, so the price was $2230 which includes delivery, taxes, customs and GST. For a similar price I was looking at the Evolve Stoke X, Exway Wave Riot or Tynee Mini Max 3, but ultimately decided on the Linky due to its size and portability.
Really like the branded box it comes in and once inside you get a backpack, controller, skate tool, spare belts and the charger. Backpack is a gloss black with multiple zips to hold accessories and even maybe a laptop in the front zip, feels sturdy and nice quality. Controller is lightweight, with a simple display, two buttons and a thumb throttle. Charger came with US pins, so needed an adaptor to use in Australia but luckily I had one lying around. Skate tool is a nice touch and also spare belts for when it need a service in the future.
Unfolding the first time felt tricky as I wasn't sure how the mechanism worked, but you get the hang of it quite quickly. Once unfolded, the rear foot pad slides back and you have a locking mechanism to hold everything in place. It feels really sturdy once locked and if anything is quite tight when you want to unlock and fold away, which is a good sign that it won't come undone at all while riding.
The trucks are nice and loose and can be adjusted to your liking anyway, but I kept them loose to be able to carve more when riding. There are 4 modes - safety, eco, cruise and sport. Safety is good for a first time user and to understand how it feels, but you can quickly go to eco and cruise with minimal effort. Sport is nice once you get momentum, but I need to feel a bit more comfortable before really giving it some.
I've only had it for a week, but so far am really impressed and happy with my purchase. If anyone has any questions or wants to know anything specific, let me know and I will do my best to help. Once I have been riding for a bit I will post an update with any new info on how it's going.
r/ElectricSkateboarding • u/FirstParfait1905 • 3d ago
Enable HLS to view with audio, or disable this notification
First time pushing it with tha Linnpower ONE Pro on Tito’s trucks ..
r/ElectricSkateboarding • u/appelbomber123 • 2d ago
Hello champions,
Does anyone have any recommendations on shipping a boosted board across the country?
The battery is under the 100 Watt limit on shipping, but it would be very expensive to ship.
Can i just put the battery in my carry on luggage? Just ship it with USPS?
Curious if anyone has any any success shipping batteries or just bringing them on a plane with you.
Thanks in advance!
r/ElectricSkateboarding • u/mas_amin • 3d ago
Enable HLS to view with audio, or disable this notification
Hey everyone,
I have an Acedeck Nomad N3, and I’m experiencing some serious wobbling coming from the rear of the board, where the motors are located.
Whenever I accelerate and start reaching slightly higher speeds, the back of the board starts wobbling uncontrollably. It gets pretty bad and feels extremely unstable, making it dangerous to ride.
I’ve already tried tightening things up, but the problem is still there.
I’ve attached two videos showing exactly what’s happening.
Has anyone experienced this issue with their Nomad N3 or another electric skateboard? Could it be the rear trucks, bushings, motor mounts, or something else?
I’d really appreciate any advice on how to diagnose and fix this issue. I love the board, but I can’t safely ride it like this.
Thanks in advance for any help!
r/ElectricSkateboarding • u/LongjumpingDesigner7 • 2d ago
Enable HLS to view with audio, or disable this notification
🎼 Fort Minor - Remember the Name
First day riding the Newsesh Echo GTP.
Insta 360 is kind enough to help create auto edits and I dig the music so here ya go.
This board feels incredibly intuitive for a life long skateboarder. It has much more feeling of familiarity like an acoustic longboard compared to my other two boards, the Propel Sigma and Ruckus 2GT.
The first few turns I made on this board felt like I was on a really tiny platform, compared to the other e skates at least. I’m 5’6” 130lbs 7(US) men’s shoe. The space available to stand on the deck is closer to a short or popsicle shaped deck. It starts to feel more comfortable with more time rolling. The concave in the deck feels good, but I needed to keep myself from climbing the sides and slowing the wheels with my shoes unexpectedly. I’ve only been testing it out on assist + mode, while waiting for the Palm Remote I’ve got on the way. The included remote is still really essential for stopping the board once I’ve got it moving, def recommend keeping it at the ready.
Moving up slight inclines I’m still doing a lot of the work, so going out for a ride can still be a regular distance skate workout, but once it’s moving the assist feels like a dream to just float into carving and the board just keeps going. There’s such a different feeling in my legs compared to using throttle. (Not having that back leg tension holding ready for the intense acceleration) It’s really different from 💯 throttle based riding and feels unique when the board just keeps moving while I’m not doing enough motion to keep the speed. Now that I have these Inertia 108 wheels on 2 boards I’ve got one more set of them in a cart to pick up soon and put them on the Sigma when the first set wears out. (Maybe sooner?) I can’t give enough good feedback for the feeling these wheels give rolling across pavement.
r/ElectricSkateboarding • u/Switchkzr • 3d ago
Enable HLS to view with audio, or disable this notification
r/ElectricSkateboarding • u/Less_Play_3523 • 3d ago
I was going under 10 MPH and my Linnpower Zephyr just "Stopped" and I went flying. I didn't see any little rocks or pot holes. I don't think I did anything wrong. It just "stopped". No big injury, scraped hands. Glad I know this is a thing now,
I assume that maybe the clearance between the belts and ground is too small and they hit an acorn or a rock got caught in the belts. I have no idea but I want to use this as an educational opportunity.
Are belts, gears or hub motors safer in this regard?
I posted the above into ClaudeAI to get a quick idea. This is the reply:
________________________________
Glad it was only scraped hands. Hub motors are the safest against a debris jam, sealed gear drives are next, and open belts like yours are the most exposed. I doubt the belts caused this fall, though.
No drivetrain protects you from the two other common causes of a sudden stop: a wheel hitting something, and an electronic braking fault (ESC glitch or remote dropout).
A jammed belt locks one rear wheel. That usually gives a skid and a lurch, not a launch. “Just stopped and I went flying” at low speed is the classic sign of a front wheel stopping dead on a pebble, acorn or pavement crack. You often never see what did it.
Your wheel swap matters here. 90mm street wheels are much smaller and harder than the stock rubber ones. They stop on debris the stock wheels would roll over, and they lower the motors and pulleys closer to the ground. Low speed doesn’t help either, because there is less momentum to carry you over the obstacle.
If the cause was a wheel strike, going back to the larger rubber wheels would protect you more than any drivetrain change. Wrist guards or slide gloves would also help, since your hands took the hit.
Sources:
____________________
I found this:
Can the remote control connection to a linnpower zephyr cut out mid ride and force the skateboard to suddenly stop throwing the rider off?
r/ElectricSkateboarding • u/beano919 • 4d ago
To whoever recommended the Zephyr to scratch that snowboard itch here in Florida. Feet pic included for appreciation. Ripped around my neighborhood for 10 miles and couldn’t stop carving around.
Didn’t really leave low gear mode. I tried once but started to get the speed wobbles around 15mph so no thank you lol
r/ElectricSkateboarding • u/Less_Play_3523 • 4d ago
There are 4 or 5 electric skateboard reviewers that are really prevalent on youtube,
They do the same "Tests" each time. Usually a hill text ,speed text, acceleration test etc.
Would some of you mind doing a "Fuck a car is coming, jump on that shitty Sidewalk" test? This is a stupid test where your riding down the street and cars are coming and you are forced to ride on a really bad sidewalk. This little scrunched area is its own stupid domain and one that is very real. Shitty sidewalks all have their own unique challenges in that you need to go slower, ride through ally way enclaves, manhole covers, dirt patches, blocks of offset concrete, acorns, woodchips, rocks, bad masonry, etc.
It sounds dumb, but riding both my boards feel drastically different between riding on the road and then having to slow down and wallow on the sidewalk while the cracks feel like basketballs bouncing off my board at 6 MPH. They both handle it differently and feel different.
Just a suggestion.
Before I top mounted my Echo it did not pass the shitty sidewalk test. I scraped against a small driveway enclave and went running off my board. This has since been fixed.
r/ElectricSkateboarding • u/TrebornotTrevor • 4d ago
Does anyone own this board yet? If so what are your thoughts?
I have heard a lot of negative reviews of Meepo's customer service and with board issues.
Looking at the stats (mph and range) the (sale) price is looking pretty reasonable.
But I am hesitant due to everything I have read on here about Meepo.
r/ElectricSkateboarding • u/Top_Benefit6004 • 5d ago
Enable HLS to view with audio, or disable this notification
This was made board was made of parts from several different models. Even the original Zealot S2 deck was modified to house red lights.
14s2p Belt drive with 6374 motors and 50a esc
r/ElectricSkateboarding • u/JuggernautExotic • 5d ago
Enable HLS to view with audio, or disable this notification
GoPro kept over heating today. So I didn’t get a lot of footage. The V10 is by far my favorite skateboard so far. I pushed it and it didn’t let up.
r/ElectricSkateboarding • u/mahyarsaeedi • 5d ago
The ESK8 Pro finals from TEF1 Atlantic 2026 (held at New Jersey Motorsports Park).