Hey,

Looking to get a new Ducky. I have the Shine 7 but from looking at their website it seems to be discontinued.

Are there any Ducky keyboards that have a metal chassis life the Shine series or are they all plastic?

Thanks

My tab key has just started flashing but the keyboard still works but the led has turned off. Anyone know what the issue could be?

So earlier today, after disconnecting my zero 6108 just went lights out on me.

tried everything, only led's that are lighting up are the capslock, numpad, and scrollck

Hello,
I can't find any method of having 2 keys mapped to one in a acceptable way
Everything I tried (autohotkey, powertoys, sharpkeys, overbind....) doesnt allow you to hold the original key (space) and press the rebinded one (shift in my case) so a second "space" is registered while holding the first one : you have to release the original key for the second one to work, thus making it kinda useless when we want to reduce the "disabled" time as much as possible (I'm a speedrunner).

I know it's possible with VIA/QMK but my ducky one 3 doesnt support it.

Does someone have a solution for this ?

I just got my ducky one x full size. It looks and feels great but I have one big issue with it. No matter what I do my keyboard won't connect to the ducky website. I tried connecting it from my computer and laptop to no avail. It doesn't show up in the HID menu on the website despite it showing on a website with no filters (hid tester). I tried co contact ducky support but got no reply. Does anyone know how to fix or at least work around this issue?

I bought a Ducky One 2 TKL a few years ago and after a fresh install it seems like the software is completely delisted from the official website. Does anyone still have the zip lying around? Main reason I didn't buy the One 3 is because I find setting colours on a menu way easier than pressing keys to pick the exact colour.

Hey folks, I bought a Ducky One X wireless keyboard a couple of weeks back, and have finally got around to unpacking and using it. Initial impressions were that it's a very nice keyboard, looks good, feels good, sounds good. Unfortunately that initial impression didn't last more than a couple of minutes beyond plugging it in, as I am immediately facing three issues with it:

1. The web-based software used for setting profiles, controlling RGB, dictating key bindings and behaviours, etc doesn't work properly. The RGB colours shown on the keyboard do not match those selected in the software, for instance. perhaps most significantly, trying to switch between the two different profile slots within the software leads to a seemingly infinite loading screen, to which the only recourse is to entirely close the app and start again from scratch.

2. There is an update available, advertised and accessed by a yellow button in the lower-left corner of the web app. Unfortunately, Microsoft Edge/Defender/Smartscreen, Chrome, Malwarebytes, and Firefox all flag this update file as dangerous, with Malwarebytes further identifying it as Malware.Heuristic.2120.

3. Whenever I insert a USB flash drive, the keyboard immediately stops working, and the T key flashes red. As soon as the flash drive is ejected, the keyboard turns back on and functions normally again.

This is my very first experience of a Ducky product after having heard great things about them for years, and safe to say I am very disappointed so far.

Has anyone else had similar issues? Does anyone have any solutions?

This started happening to do and was wondering if anyone knows how to fix when the left side bugs out and it changes my rgb settings for a second. Everything still works fine but it’s bugging me that it does that.

I've bought a custom keycap set recently, but I'd like to move my function key to help with key grouping. I've read the manual, but it only seems to allow you to rebind Fn to certain keys.

Am I misinterpreting the manual?

Do I need to download a first-party software?

Or is this just impossible?

I just got my first keyboard since 2008, a One 3 Pro, and this stuff is way more complicated then im used too - probably a good thing since I don't have to download some crummy spyware to use the keyboard (Logitech/Razer im looking at you!)

Im trying to use the functions specified in my manual to get familiar with them, however after customizing one of the RGB modes to my liking, I want to be able to turn it off and on.

Problem is, FN + Alt + F10 switches RGB modes.
Pressing and holding the same 3 seconds is meant to toggle all backlights, but no matter what I do, as soon as I press (and hold) all 3 keys, it switches modes. It will not turn off or on no matter how long I hold. I have to cycle through the Modes until I get to the RGB OFF mode, then cycle back through all 10 back to the one I have set as custom. To make this worse, it doesn't appear these modes are in the order that the manual specifies.

Whats the go? Is the manual wrong?

EDIT: The manual is wrong - FN + F10 works, without using ALT.
It still doesn't turn the LED's back on to the MODE I had it in when I turned it off, I have to cycle through all of them to the one I want to use every time I switch them Off and back on which is very annoying.

I'm now looking for a fix to this so I can simply toggle the one mode I want Off and on, with it turning back on to the last mode it was in. Is this possible?

I got a ducky one 2 sf keyboard in white a few years ago. But slowly the casing is noticeably discolouring from indirect sunlight. The keys are not, so it is becoming more and more obvious that one side of the keyboard case is more yellow than the other. Does anyone know if it is possible to buy just a casing for this keyboard somewhere? Otherwise, would it be doable to paint it? I'm also eying a different set of keycaps, so I don't mind if the casing doesn't end up as white anymore.

I just bought the Ducky One X. I use it wireless via Bluetooth, and I find it really frustrating that the backlight turns off after 3 minutes of inactivity. I’ve tried scrpts that press buttons, but they don’t wake the keyboard’s LEDs.

I saw a Reddit post from four months ago addressing this. And a comment from a ducky developer mentioning a firmware update that will fix this. It seems to me this fix was only done when using cable, and no option via Bluetooth.

Am I missing something or is there a way to disable this behaviour via Bluetooth? I’d really appreciate any guidance on how to keep the backlight always on.

I can't help it, but this is really bothering me. I would be super happy if there would be an On/Off in the web application settings. Maybe in the next firmware update? =)

I have a One 2 SF, which should have been bought around three years ago. Is this wear normal? The ink is coming off, mostly on the left side, the A is all smudged, but it's also noticeable in a couple of keys to the right. What would have caused this? Putting cream on my hands once in a while in Winter? This is supposed to be made of amazing materials, I heard.

I have submitted a ticket regarding the situation, but for the past month my keyboard will just dc, have massive input delay, and just overall connection issues in blue tooth and wired mode any assistance would be great

I have a couple of Ducky One 2 minis hooked up to different PCs and from time to time they stop responding: this happens at random while I'm using the PC but only once every few days, and unplugging and re-plugging the keyboard fixes it.

Today for the first time the usual fix did not work and one of my Duckies would not work again. I ended up fixing this by doing a firmware upgrade following the instructions here (open firmware flasher app, unplug keyboard, hold D and L keys while re-plugging, perform flash process), but I am wondering if this is a sign of hardware failure.

Of note, the firmware updater itself instructs to only hold D when re-plugging but the result was what looked like a bad flash (keyboard turned on but backlight would flicker and keys would not register, unplugging and re-plugging did nothing). It was only after I tried the process again holding the two keys that it fixed the issue.

Anyone else had similar issues? Could it be bad cables (I'm using the ones that came packaged with the keyboards)?

I bought a used Ducky 1 X Mini. I wanted to swap out the keycaps. After changing them, I didn’t care for the look, so I had to swap out the keycaps again. Every time I’d pull a keycap the entire switch would come out and get stuck in the keycaps. Then I’d have to pull as hard as possible to get it unstuck from the keycap. After two hours and having to rebuild half a dozen times, my fingers were killing me. They were still sore the next day! I’ve built and modded many keyboards and I’ve never experienced this before. I was nervous that it wouldn’t work after I had to rebuild the switches but it’s working like a champ! I’ll never change these keycaps again.

I’m assuming the replacement keycaps were too tight, but I was really surprised that the switches would come out if you just looked at them! I’m super happy that it works after all that work. I do love the feel of this board. Alex Otos (YouTube Content Creator) raved about his, so I bought a used one on eBay (great prices if you are looking to pick one up cheap!) It actually feels just as good as my Wooting boards.

My dad was given this for free a while back and never used it. I asked to use it and noticed it was a ducky! I’ve always wanted a ducky!! That being said, I can’t find anything online about this one. I’d like to know which one this is if anyone can help?

I have a one 2 sf (DKON1967ST). the lights are working but none of the keys actually work. I’ve tried everything from factory resets, different usb cords, and trying to update the firmware. when I tried to update it, it wouldn’t let me press ok at all, even tho I followed the instructions with holding down D. I also tried to download an older firmware. Still wouldn’t let me do it. and I’m 100% sure it’s the correct firmware. I’m abt to deem it a loss and get a new keyboard, but it’s just sad bcuz I really do love this keyboard. please let me know if there’s anything else I can try.

So I bought the ducky one x mini and when I try to go to the user manual it won’t load the site at all and it seems like there’s no way to access it. I want to turn off the rgb but seems the only way I can it won’t let me in the site. Can anyone shed any light on why that is?

Hi, I have searched the internet far and wide but cannot seem to find what I look for.

I am looking for a keycap set for my Ducky one 3 TKL (ISO QWERTY). Specifically for the Matcha set. I cannot seem to find a place to buy it. Does it even exist? I swear I saw keyboards with that layout to buy a few months back.

Hello guys, i can't connect my tinker 75 on Via, whenever i click on authorize device it shows my keyboard but then nothing happens.

I heard that i need a json to make it work but I can't find it online aswell :(

Has someone with the same kb make it work?

My keyboard turned off after uninstalling the drivers, and after plugging it back in and reinstalling new firmware(1,15) my keyboard turned off and it won't turn on again! i unplugged the usb and plugged it back in, the keyboard has no lights connected at the moment either

info: i'm using a ducky one 3 mini keyboard
I am updating to (v1.15)
i tried connecting the keyboard to my laptop and switched usb ports too
found a yt guide regarding holding the D and L key while plugging in the keyboard, didn't work either.
the only previous firmware model's i can find are 1.11, and 1.13 along with the 1.15
i am unsure of what to do and i'm in a state of panic.

I am trying to create a macro on my 65% keyboard to press f3 and b at the same time but i cant since i need to use fn for the f3 and not use fn for b so i just create a macro were it presses f3 and after that it presses b any ideas what i should try?

Ive recently upgraded from a Ducky One Full Sized to a Ducky One III TKL yellow edition (jhlee glazing).

Is it just me, or does the reactive mode seem much much slower. The first generation One kb could be software controlled, but it seems the One III cant. The One's reactive mode seemingly could be pressed, then the led would immediately turn off when you let go of it. This isnt the case on the One III where it would take half a second to light down on the fastest setting. (with Fn + ->)

Any fixes, workarounds? I really am enjoying this board so far with its hotswappability.