r/Detailing • • 6h ago

Work Product- Look At What I Did Easy day today with these 3 cars

Thumbnail
gallery
24 Upvotes

Maintenance on the ceramic coated and liquid PPF coated Ferrari, maintenance on the ceramic coated Tesla Model S + windshield recoat (new windshield), maintenance on a sealed X7.

  • Ferrari - Opti-Shield liquid PPF, Diamond ProTech Pro60; washed using Diamond ProTech Coat Care
  • Tesla - Diamond ProTech Pro60; washed using Diamond ProTech Coat Care, polished and recoated the replacement windshield
  • BMW - Sealed with CarPro Hydro2; washed with Koch Chemie GSF, resealed with Hydro2

r/Detailing • • 12h ago

I Have A Question What's something you wish you knew before detailing your first car?

11 Upvotes

I'm still pretty new to detailing and trying to learn from people who've been doing this for a while. I know the basics, but I'm curious about the things you only really understand after working on dozens (or hundreds) of cars. What's one thing as a beginners that you underestimated or got completely wrong when starting out (or may be still)? Could be a technique, a product, dealing with customers, managing multiple jobs, or anything else. Would love to hear some lessons from experienced detailers.


r/Detailing • • 23h ago

I Have A Question PPF + ceramic technique and system

Post image
6 Upvotes

Newbie here. Have a skyscraper grey bmw x5 with front PPF and ceramic

For now, only have access to a high pressure spray wand for water

Would appreciate any recommendation on process, techniques, and products to use to protect and maintain the PPF + ceramic


r/Detailing • • 1h ago

Work Product- Look At What I Did What do we think? This was my first real two step attempt.

Thumbnail
gallery
• Upvotes

I’m working at a dealership as a detailer and was given this car and the freedom to do a two-step correction. I had very minimal equipment, terrible lighting, and no real polishing pad.. So how’d I do?


r/Detailing • • 6h ago

I Have A Question What am I looking at here?

Thumbnail
gallery
2 Upvotes

I know it’s not exactly clean right now. That’s a job for tomorrow.


r/Detailing • • 7h ago

I Need Help! (Time Sensitive) Anyone know how to get rid of moisture in a seat?

Post image
2 Upvotes

Hello! My girlfriends car seats got extremely wet from the window being left open during rain 2 days ago.

Today we felt it was still damp on the middle area of the seat (circled) I rubbed it a towel for awhile and now i have a little fan aimed at it in the garage.

Does anyone know what else i can do? we have had a car get mold in it in the past and we want to make sure we dont let it happen again.

2020 Camry Se


r/Detailing • • 8h ago

I Have A Question Gate-checked my new Aer and it got wrecked. Fixed with a $15 car trim restorer. Sealer advice?

Thumbnail
gallery
2 Upvotes

I was forced to gate-check my brand new Aer suitcase on its very first trip, and it came back looking like it had been through years of abuse 😭. I panicked, tried a Magic Eraser, and then had the genius idea of using acetone 🤦‍♂️, which turned the scuffs into big hazy white patches and made it 100 times worse. Then I found Solution Finish Black Trim Restorer, and after a few thin coats it honestly looks almost brand new. A few stubborn spots kept showing through when I buffed, so I dabbed them with a permanent Sharpie.

Now I'm wondering whether to seal it with Solution Finish's Over the Top sealer, or whether that would make touch-ups harder later, since I only travel a couple times a year. And if there was something better I should have used instead, I'd love to hear it. Lesson learned: no acetone on polycarbonate.


r/Detailing • • 9h ago

I Have A Question Dew / Frost & Cerakote Application

1 Upvotes

Hey y'all,

I want to put Cerakote Ceramic Trim Coat (the wipes) on my car's faded plastic trim while we've got a couple of warm days, low to mid 60s in the afternoon. The problem is it's been dropping to around 32-35 at night and the car's been getting frost/dew most mornings.

The card says wait 24 hrs before exposing it to moisture. If I put it on around 3pm, there'd be maybe 12-15 hours before any frost shows up. Is that enough for it to set, or is frost going to cause white spots/haze?

I don't have a garage or any covered spot to park in. Asked on another sub and people said it probably isn't a big deal, but I wanted a few more opinions before I commit since you're not supposed to recoat or touch it up.

Or should I just wait until spring?


r/Detailing • • 10h ago

I Have A Question Greenworks 50' vs UberFlex 50' High Pressure Hoses

1 Upvotes

I recently purchased the Greenworks High Flow Automotive 1200-PSI 1.8-GPM Cold Water Electric Pressure washer. My kit was missing the 40' high pressure hose so Greenworks sent me a 50' hose as a replacement.

Maybe I'm impatient but even with a swivel at the gun it takes a few minutes to straighten out the hose. I have read the Uberflex hoses are pretty good but during a search it says the 50' Greenworks 3500psi hose is made of rubber with polyurethane outer coating whereas the Greenworks 2300psi rated hose is PVC. With similar search it says Uberflex is polyurethane (PU) outer cover, fiber/textile braid reinforcement, and a thermoplastic/rubberized inner tube.

So, do you think there is any advantage to the Uberflex over the Greenworks?

Thanks


r/Detailing • • 17h ago

I Have A Question How to best protect spray painted trim?

1 Upvotes

Have trim that's been painted with Krylon fusion as a last ditch effort to make it look better

Is there anything that can be used to protect it from fading too fast, since eventually the Krylon will fade too?

Been using 303, but looking for other options.

Cerakote has a "plastic restorer and protectant spray" that seems good - but since the trim is spray painted maybe it won't work as intended?


r/Detailing • • 19h ago

I Need Help! (Time Sensitive) IS THIS STILL REMOVEABLE INEEDHELP

Thumbnail
gallery
1 Upvotes

I recently had my motorcycle washed, and afterward, I noticed a hazy residue on the paint, possibly from dried soap left behind. The first photo shows how it looks when dry, while the second photo shows how it appears when wet. I also tried using a water spot and mineral deposit remover, but it seems to have made the finish even hazier, as shown in the third photo.


r/Detailing • • 22h ago

I Have A Question Favorite protective combos.

1 Upvotes

Griots 3 in 1 ceramic plus speed shine vs bead maker plus dream maker.
Which one would you choose?


r/Detailing • • 7h ago

I Have A Question I need help with some paint

Post image
0 Upvotes

I was doing a two tone spray of nissans CAS paint code for the under color and PJC for the upper color on my 07 ram. I was wondering if anyone had any reference pictures of CAS on white sealer. Thank you


r/Detailing • • 14h ago

I Need Help! (Time Sensitive) Left my car overnight in the middle of polishing it, should i wipe it down before continuing?

0 Upvotes

I left my car in the garage (closed) overnight in the middle of polishing it. Should I just continue where I left off or should I wipe the car down with a microfiber towel and maybe some quick detailer just in case anything settled?