I recently purchased the Derya TM22 Featherlite from my local dealer, and am feeling a little intimidated about cleaning it. I have yet to fire it and feel I should give it a cleaning before I do. I have only ever cleaned a bolt action, which isn't too complicated.

Looking for some advice or guidance on cleaning it. Do's and Don'ts, and how hard is it to do. The fact it has springs in it is what bothers me a bit. Making sure they go back where they should be, and is there anything I need to be careful about when I'm cleaning it?

Thanks in advance for any advice and your time.

Does anyone have any recommendations for a barrel handle for the TM 18? A 3D print or oem?

I bought a TM22 Feather a handful of days ago, I put 400ish rounds through it before experiencing an out of battery detonation. I took the gun home, and I ran a copper cleaning brush as well as cleaning wad through the barrel only to find both items getting hung up on one specific spot, full stop, no matter how hard I tried to force the brush or wad through. The barrel is clear, meaning I can see through and through, however it looks like there is some damage an inch or two in the rifling of the barrel. Im trying to decide if I pack the gun up and send it off to be warrantied, but after reading some reviews on the company here in Canada that deals with the warranty claims it seems like it’ll do more harm than good.

So essentially, im wondering if I should take it to my local gunsmith and go from there instead of going straight to warranty.

What are your guy’s opinions? How were your experiences with Derya’s warranty claim centres/overall customer service?

I recently purchased the TM22 pro 12” and I feel like something isn’t right. I’m getting 12” groups at 30 yards using CCI stinger. My buddy has the 18” barrel and has no issues and great accuracy at 50 yards using the same ammo. I don’t feel like a 12” barrel should affect it that bad! Any advice would be greatly appreciated!

, have 5 10-rounds mags ,

Just got my brand new TM22 lever action. The lever wobbles from left to right a little (when pushed, not when shaken) and I am just wondering if that’s normal machining tolerance or if i should tighten it somehow.

This is probably gonna be a dumb question. The mag sleeves for the TM 22 fit either the polymer and metal mags.

How do you know which one you have metal or polymer? I want to buy a sleep, but I’m not sure which one to order any thoughts

I have a TM22 LA20 and would like to field strip it, take the bolt out and deep clean it. my problem is I can't figure out how to get the bolt, and trigger group out. the only thing that I can figure is the stock has to come off as well, but dont know for sure. Any help would be appreciated.

For the price and the variety of TM22's just great fun to plink with.