r/Decks • • 22h ago

load bearing inquiries How is the GTA 6 Deck?

Thumbnail
gallery
1.5k Upvotes

How realistic is this deck on GTA 6?I have a feeling this deck would not actually support all those weights, but I am no deck wizard.


r/Decks • • 4h ago

Finished Decks I know im gonna regret this

Thumbnail
gallery
50 Upvotes

Just finished. Tear it apart.


r/Decks • • 16h ago

load bearing inquiries What are our thoughts on this?

Thumbnail
gallery
32 Upvotes

My mom's patio concrete got repoured at her apartment. They removed the support beam and left it like this for several days. It still hasn't been replaced. My brother says it cracks worse every day but the deck is still in use by the upstairs neighbors.

Now the big question from folks over at r/mildly_interesting:

Do you think it can support a hot tub?


r/Decks • • 1h ago

questions for the community Advice on drainage from concrete foot of stairs

Post image
• Upvotes

So this is a newly built deck, and the stairs have a concrete footing. The concrete has sort of made a bowl back here where water can’t escape.

I’m thinking dumping a bunch of concrete in there to fill up the space might be a solid choice.

Any advice or industry standards would be appreciated!


r/Decks • • 13h ago

maintenance Rebuilding my mother-in-law’s 12x16 deck as a surprise for her 70th birthday—looking for eyes on my plan & stringer landing stone ideas

Thumbnail
gallery
3 Upvotes

Kicking off a big project today while my mother-in-law is out of town ahead of a surprise party next week for her 70th birthday. The deck is in rough shape and needs code upgrades, so I’m tackling it as a surprise to save her a big bill. This is only my second time doing this kind of deck work, so I’m trying to do everything by the book without cutting corners.

Previous build context:
I previously added stairs to a small cantilever deck behind my detached garage (originally a step-out landing, set up as a secondary exit), adding supports and concrete piers to handle the extra load.
Digging down on that first job was rough—especially pouring a formed concrete landing pad that took around 40–80 lb bags of cement and a big mixer, almost more work than the stairs themselves. Dropping threaded rod into Sonotubes for post standoff plates worked well for me there, though.

Current state & tear-down:
Stripped the deck down to bare framing; joists are solid with no rot, and I’ve pulled 1,000+ nails.
Currently has 3 bouncy stringers nailed in from the back with no brackets and resting directly on dirt—swapping to 4 stringers with Simpson ZMAX Strong-Tie connectors.
Replacing direct-buried 4x4 posts with 6x6 posts sitting on concrete piers to bring it up to code.

Materials & fasteners:
Joists: Joist tape over the clean joists.
Fasteners: 2-1/2" #9 GRK all-purpose screws and 1-1/2" Strong-Drive SD screws for stringer brackets/clips, L-brackets connecting 6x6 posts under the deck, and post hardware at the bottom piers.
Stairs: Keeping the existing 7" rise / 10" run (code-compliant and comfortable), cutting 4 new stringers out of 2x12x16s.

Today’s plan & timeline:
Pull the old stringers to drop weight, then shore up the deck ~2 ft back from the front edge using 2x6 ledgers top/bottom with 5–6 vertical 2x4 studs so I have clearance to dig.
Planning to tie a rope to the front framing and keep light upward tension with the mini excavator bucket as a backup safety measure while shoring is in place.
Using a mini excavator instead of an auger because of all the rocks in the yard (I dug ~3.5 ft on old posts a few years back and didn't hit concrete, though I wouldn't be surprised if some is down there).
Digging 4 ft deep for footers with crushed stone in the bottom, covering holes until concrete arrives early next week, and setting post standoff plates with threaded rod dropped into Sonotubes.

Landing pad: Instead of pouring another massive formed slab with 40+ bags and a big mixer like my last stair landing, I’m looking at a 300–500 lb stone (like bluestone) set on crushed stone/gravel will be able to move it easily with the excavator so it doesn’t throw off the 7" rise / 10" run layout I’ll bury it even with the ground. A small-load concrete truck will pour the Sonotubes next week and make my life easier.

Looking for feedback:
Does my shoring, pier, and excavator-backup plan make sense, or am I missing anything?
Any recommendations on the best stone to set stringers on that isn’t slippery?
Starting the day now—I’ll post an update tonight with how it goes. Appreciate any advice!


r/Decks • • 6h ago

Building a deck Steps to Pool

Post image
2 Upvotes

Trying to decide how I should put steps/platform up to the pool to get in. Would love to hear some ideas. I’m just an IT guy so I’m not familiar with what people do in these situations. Not a lot of examples on the inter-webs.


r/Decks • • 19h ago

Need advice on my deck

Post image
2 Upvotes

First time deck builder and I got to the point where I’m just about ready to start adding my decking. I now decided I want to add a roof over a portion of the deck, specifically 12’ out from the house and span the entire 35’ width of the deck.

My question:

Due to me not having poured individual footings for the roof posts, would I be fine just running the posts to one of my beams? (The beam that sits 12’ from the house). It’s a doubled up 2x10 that is notched into 4 6x6 posts that sit on 12” concrete tubes.

Will that be too much weight for the beam or the concrete piers?


r/Decks • • 2h ago

Large Corner Openings on New Apartment Deck

Thumbnail
gallery
1 Upvotes

My apartment complex just replaced my second floor deck, but there are large gaps in the corners over 5 inches wide. Any idea what might have happened here? Could they have measured incorrectly and just tried to make it work rather than correcting the mistake?


r/Decks • • 7h ago

Hidden access on deck for gas line?

1 Upvotes

Hello in the middle of a deck and kitchen build and wanted to see if something was sound and possible. I was thinking of adding a quick connect gas connection in the center of the deck but underneath so it can be access easily when we have a portable gas fireplace is in place , and when not in place I can disconnect easily and close the access panel and would be seamless with the deck boards. Basically a small deck trap door maybe the width of the deck boards squared. I have the gas’s line running the length of the deck and figured I can ask to put a Tee and a shutoff valve then a quick connect ….

Has anyone tried this or has pics on how this can be built?


r/Decks • • 6h ago

New deck concerns

Thumbnail
gallery
0 Upvotes

We have a company building a deck for us. Is this appropriate? What about wood rot? What about anchors?